HL -ring chain bucket elevator centrifugal Product Overview : HL
-ring chain centrifugal bucket elevator for vertical conveying
large abrasive powder, granular and small bulk materials , such as
grain, coal , cement, crushed ore conveying maximum height 40m,
which is characterized by simple structure, stable operation, dig
loader , hybrid or gravity discharge, using a combination sprocket
rim , easy to replace, long life sprocket rim special treatment
lower gravity as automatic tensioning device to maintain constant
tension to avoid slipping or off the chain, while in the hopper
meet resistance , there is a certain tolerance for sex can
effectively protect the moving parts , the material temperature
does not exceed 250 ℃.
HL -ring chain bucket elevator centrifugal main features :
1 , smooth operation, high transmission efficiency ;
2 , in the form of multi- hopper , should be preferred ;
3 , adaptable , easy installation and maintenance , long life ;
4 , the whole small size , high speed, to ensure rapid and uniform
delivery .
HL -ring chain centrifugal bucket elevator works:
Boosted production screening machine centrifugal HL -ring chain
bucket elevator from moving parts ( hopper with traction chain ) ,
the upper section with a drive sprocket , with the lower section of
the tension wheel , middle chassis, drive , check brakes and other
components ( see centrifugal chain bucket elevator outline ) .
Hopper The hoist is intermittent layout, use the " dig emulated "
for loading, " centrifugal feeding Law" discharge. The traction
hoist mechanism is two circular chains . Our company produces
centrifugal HL -ring chain bucket elevator from moving parts (
hopper with traction chain ) , the upper section with a drive
sprocket with tension lower sections of the wheel , the
intermediate chassis, drive means and the check braking device and
other components. Hopper The hoist is intermittent layout, use the
" dig emulated " for loading, " centrifugal feeding Law" discharge.
The traction hoist mechanism is two circular chains .
HL -ring chain bucket elevator mechanism centrifugal method and
installation method :
1, according to the shape of the hopper is divided into two : S
system of law - with a deep , round-bottom shaped hopper ; Q Method
- with a shallow round-bottom shaped hopper ;
2, according to the form of the discharge port of the upper section
is divided into two types : X1 system of law - with sloping flanges
discharge port ; X2 system of law - with horizontal discharge port
flange ;
3 , press the inlet portion of the form is divided into two
sections : J1 Method - inlet slope angle of 45 degrees with the
horizontal ; J2 Method - inlet slope angle of 60 degrees with the
horizontal ;
4, according to the middle of the side view of the door cabinet
positions into four : K1 system of law - with the lower left side
of the middle of the cabinet door View ; -; K3 system with the
lower end of the middle of the right side of the cabinet doors K2
View Method France - with the upper left side of the intermediate
casing inspection door ; K4 system of law - with the upper end of
the right side of the middle of the cabinet door View ;
5, according to the middle position of the door casing end face
view is divided into two : Z1 system of law - with the lower end
surface of the intermediate casing inspection door ; Z2 system of
law - with the upper end face of the intermediate casing inspection
door ;
6 , according to the relative position of the actuator hoist
divided into two: left loaded - drives on the left side ; the right
equipment - in the right gear
HL series of chain bucket elevator centrifugal Outline :