Sign In | Join Free | My chinaqualitylighting.com
chinaqualitylighting.com
Products
Search by Category
Wholesale Marketplace
Home > Other Paper Products >

Multicolor Marine Spray Paint Epoxy Ballast Tank Coating Red / Grey

Categories Marine Spray Paint
Brand Name: Huisins
Model Number: H53-201
Certification: ROHS/SGS/ISO
Place of Origin: China
MOQ: 500 gallons
Price: negotiation
Payment Terms: T/T or L/C or D/P
Supply Ability: 2,000MT per month
Delivery Time: 15 working days after received your payment
Packaging Details: Park A 24KG/13.5L in 20L container Park B 6KG/6.5L in 9.25L container.
Main Raw Material: Epoxy
Standard film thickness: 160μm dry ( 222μm wet)
Application Method: Spray
Color: Multicolor
Type: Topcoat
Luster: Matt
Theoretical spreading rate: 200
Solids (vol %): 230g/L
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile
    English
    Français
    Русский язык
    Español
    日本語
    Português

    Multicolor Marine Spray Paint Epoxy Ballast Tank Coating Red / Grey

    Product Description

    1. A two pack epoxy heavy-duty anticorrosive coating

    2. Suitable for application at low temperature

    3, VOC less than 230g/L

    Intended Uses

    • Use in seawater ballast tanks in all types of ships.
    • For use in heavy-duty anticorrosive areas of steel structure.
    • For use at Newbuilding-or Maintenance and Repair and Repair or On Board Maintenance.

    Product Information

    • Volume Solids 72%±2%
    • Finish/Sheen Matt
    • Typical Film Thickness 160μm dry ( 222μm wet)
    • Theoretical Coverage 4.5㎡/lat typical film thickness
    • Mix Ratio: 3:1(Volume) 4.3:1(mass)
    • Method of Application

    Airless Spray Tip size range 0.38-0.53mm

    Output pressure ≥17mpa

    Brush/Roller For small area only

    • Thinner : Not recommended. Use water only in exceptional circumstances(Max5% by volume)
    • Drying Information -5°C 5°C 25°C 35°C

    Touch Dry 6H 4H 2H 1H

    Hard Dry 36H 24H 18H 12H

    Pot Life 6H 3H 1.5H 1H

    Overcoatings Data : Substrate Temperature

    Overcoated By -5°C 5°C 25°C 35°C

    Min Max Min Max Min Max Min Max

    725-H53-201 24H No 20H No 8H No 6 H No

    • Storage :Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.

    Shelf Life: 12Months minimum at 25°C.Subject to re-inspection thereafter.

    • Pack Size :Park A 24KG/13.5L in 20L container

    Park B 6KG/6.5L in 9.25L container.

    • Flash Point: Park A greater than 31°C

    Park B greater than 29°C

    Mixed paint greater than 31°C
    Surface Preparation:

    1. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. All surfaces to be coated should be clean, dry and free from contamination.

    2. Newbuilding

    Remove weld spatter and smooth weld seams and sharp edges. The surfaces should be blast cleaned to Sa2.5(GB/T8923-1988). The weld seams areas could be to St3(GB/T8923-1988)

    Apply 725-H53-201 before oxidation occurs. If oxidation has occurred, The entire oxidized area should be reblasted to the standard specified above.

    • Repair/On Board Maintenance

    The areas to be required should be cleaned to St3(GB/T 8923-1988) by mechanical method or higher level of surface prepared to Sa2.5 by abrasive blasting. Abrade the area immediately surrounding the repair to provide a key for subsequent coating application.Overlap areas should be kept to minimum.


    Limitations

    • Apply in good weather. Temperature of the surface to be coated must be least 3°C above the dew point when the is lower than 85%
    • In common with all epoxy base coatings, this product will exhibit chalking of the film on UV exposure.
    • The dry time and over coating interval may change according to the environment factors.
    • Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.

    Buy Multicolor Marine Spray Paint  Epoxy Ballast Tank Coating Red / Grey at wholesale prices
    Send your message to this supplier
     
    From:
    Enter your email please.
    To: Huisins New Material Technology Co., Limited
    Subject:
    Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0

    Français| Русский язык| Español| Português| 日本語

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2017 chinaqualitylighting.com. All rights reserved.