Categories | Paper Tube Making Machine |
---|---|
Brand Name: | Paper Tube Recutting Machine |
Model Number: | XFJQ-200CN |
Certification: | CE |
Place of Origin: | China |
MOQ: | 1 set |
Price: | USD 10000-30000 |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 50 per month |
Delivery Time: | Within 15 working days after the payment |
Packaging Details: | Wooden box or as request |
Size: | 2700*2500*1530mm |
Paper tube diameter: | 50-76mm |
Thickness of winding paper tube: | 2-10mm |
Knife quantity: | 6-8 set |
Working air pressure: | 0.6Mpa |
MOQ: | 1 set |
Material | S304 stainless steel |
Size | 2700*2500*1530mm |
Paper tube diameter | 50-76mm |
Thickness of winding paper tube | 2-10mm |
Knife quantity | 6-8 set |
Voltage | Current state preparation voltage |
Packaging | Customed/Wooden box |
MOQ | 1 set |
How to operate automatic intelligent numerical control paper pipe
finishing machine:
First, turn on the machine: start the electrical isolating switch (set
in front of the electric control cabinet), press EMERCENCY STOP
RESET and READY TO RUN button, and turn the key to MACHINE to RUN
(main workbench) to check the voltage (380V) and whether the
current is correct and stable. Open the power switch of the
hydraulic system (set on the main hydraulic drive) and check the
oil level and pressure gauge of the main hydraulic drive system to
show whether it is correct and stable. Open the pneumatic
interception valve (set in the air intake pipe under the pneumatic
control cabinet), check whether the pressure is correct (not less
than 6.0bar), stability.
Second, set control: according to the type, thickness, length and width
of the thin film arrangement, the cut menu is set up. File the
corresponding BOPP film from PDF. The winding length and width of
the corresponding specification film are set. Select the
corresponding reel position, adjust the roller arm and press roll,
and install the corresponding paper core.
Third, feeding, film and film: wear material: according to cutting plan
requirements, in accordance with the traffic rules, according to
the actual situation, in the time frame hanging out the
corresponding parent roll, according to the choice of direction in
the corona and the cutting machine of unwinding rack, and use the
control button to clamp the steel core. Leave the steel core
support arm and driving.
Membrane: when there is no film on the cutting machine, it is necessary to
carry out the membrane. Using the slitting machine's film
penetrating device and function key, one end of the original
membrane is connected to the eye of the film penetrating ring
chain, and the push through button is started, so that the film
distributes along the cutting process and distributes evenly on
each roller.
Answer: when the film film slitting machine, roll changing joint, using
vacuum film, the first film will then start to work station
position, the first artificial cutting machine on the traction
roller film flattening and actuate the upper vacuum membrane, the
adsorption film is smooth in the film table. Double-sided tape
affixed film and the excess cut tape, adsorption unwinding frame of
the film is flattened and start lower vacuum pump to make the film
is smooth, with adhesive tape paper layer and flat adhesive film
joints should be neat, wrinkle free, and then turn off the upper
and lower vacuum pump, then turn off the answer.
About Us
Customer Services
Sell On Us
Friendly Links: www.everychina.com
Français| Русский язык| Español| Português| 日本語
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们