Sign In | Join Free | My chinaqualitylighting.com
chinaqualitylighting.com
Products
Search by Category
Wholesale Marketplace
Home > Flanges >

Red Plastic SMT Solder Paste UV Curing Plastic Bonding Adhesives For Posts 30CC

Categories SMT Solder Paste
Brand Name: PY
Model Number: 03g
Place of Origin: China
MOQ: 1pcs
Price: Negotiation
Supply Ability: 1000
Delivery Time: 1-7Day
Packaging Details: Box
SMT red plastic: SMT red plastic 120-150 degree curing adhesive for posts 30CC
Curing temperature: 120-150°C
Curing equipment: Reflow soldering
Place Of Origin::: Shandong, China (Mainland)
name: no clean solder paste
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Red Plastic SMT Solder Paste UV Curing Plastic Bonding Adhesives For Posts 30CC

    Red Plastic SMT Solder Paste UV Curing Plastic Bonding Adhesives For Posts 30CC


    Packaging & Delivery

    Packaging Details

    200g/bottle; 360g/bottle
    A small sample for testing first is avaiable.

    Delivery Time

    Shipped in 5 days after payment

    PY36G is one component epoxy adhesive and a kind of heat cured adhesive. It designed for stencil printing . High bonding strength, high humidity ,high intensity,excellent electrical performance and good storage stability.


    Typical Usage

    Mainly used for the bonding of the mounted components on SMT.


    Properties Uncured


    Typical ValueRangeTest Standard
    AppearanceRed cream
    Chemical TypeEpoxy Resin
    Viscosity (Pa.s)(Brookfield RV) Spindle 7200-400GB/T 2794-1995
    Thixotropic index7
    Density (g/cm3)1.351.32-1.38GB/T 13354-1992

    Operate Time at Room Temperature

    (day@25°C)
    14

    Curing Condition Recommended

    90-120s at 120°C.

    60-90s at 150°C

    The product will obtain to higher bonding strength when higher curing temperature and longer cured time . the figure curve is the recommended curing temperature and heating rate,Underthe corresponding temperature ,components need the time when they achieve good bonding strength.

    Users can set the curing furnace’s temperature parameters according to the solidified characteristic curve of the glue and the heat efficiency of the Reflow Ovens


    SE8309- SMT red glue printed with thick metal mask setncil


    Performance After Cured

    (Cured for 30min@150°C)


    Physical Property

    Typical ValueTest Standard
    Hardness(ShoreD)88GB/T2411-1980
    Shear Strength(MPa)18.5GB/T7124-1986
    Tg(°C)(DSC)105ASTM E1545
    Dielectric strength(KV/mm)26.8GB/T408.1-1999
    Surface resistance (Ω)3.5×1016GB/T1410-2006

    Direction For Use

    The product should be recovered to room temperature before use, don't open the aluminum foil package before recovered to room temperature(the recovering time of 300ml packaging at least 2-4 hours).

    The product should be used at 25°C ,

    The glue viscosity will decline under the higher temperature, which influence printing effect; High humidity can increase the glue of moisture absorption which shorten the opening hours of the glue and influence the glue bonding strength. This product opening time is 48 hours at 25 °C,55% Rh.

    Suggest to print at the speed of 20-150 mm/s; Drawknife pressure is 3-4 N/cm (Afer scraping, sheet should be clean, and avoid producing wire drawing); the deviating speed from the sheet is 0.1-3.0 mm/s.

    Not cured adhesive which is stick on line wires can be erased with acetone or propylene alcohol ethers.

    Please seal and chill when not using up the glue.


    Application Process


    SE8309- SMT red glue printed with thick metal mask setncil


    Notice

    Keep away from children.

    The workshop should be adequate ventilation.

    Wash with soapy water if on skin.

    Wash with a lot of soapy water and then go for doctor if in eyes.

    For more information, please refer to MSDS.


    SMT red plastic 120-150 degree curing adhesive for posts 30CC


    Item
    Parameter
    curing requirement
    Appearance
    light amber to colorless and transparent liquid
    The UV glue is formulated to cure when exposed to UV radiation of 365nm, The uv lamp power should more than 40w.
    Fixing time
    within 10s
    Curing tool
    UV lamp/UV light
    Curing condition
    365 nm
    Multi-Part Adhesive
    One- component

    Notice of Shadowless traceless fast dry UV curable glue / adhesive

    1. Make sure the glass is clean and dry.

    2. In order to ensure the stability of product, blow the glass surface make sure it is dry without moisture, in winter construction

    3. The product is irritated to eye and skin. Thoroughly flush the eyes with water at least 20 minutes, and seek medical attention, if splashed in eyes incaution
    4. Only for industrial use, please refer to instructions and Material Safety Data Sheet for health and safet
    y


    Buy Red Plastic SMT Solder Paste UV Curing Plastic Bonding Adhesives For Posts 30CC at wholesale prices
    Send your message to this supplier
     
    *From:
    *To: Ping You Industrial Co.,Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0

    Friendly Links: www.everychina.com

    Français| Русский язык| Español| Português| 日本語

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2024 chinaqualitylighting.com. All rights reserved.