Categories | Induction Quenching Machine |
---|---|
Brand Name: | CANDEA |
Model Number: | CD |
Place of Origin: | CHINA |
MOQ: | 1 SET |
Packaging Details: | WOODEN CASES |
Certification: | CCC;CE |
CD48 Vertical Hydraulic Semi-automatic Quenching Machine
Induction heating applications is no longer just a power
independent, but often the integration of mechatronics
equipment,which meets various process requirements from clients.
Based on such purposes, our company d has absorbed the advantages
of a number of quenching machine in the world, developed a variety
of general or special quenching machines, in order to meet the
needs of different clients.
Summary:
This machine is a practical, cost-effective, easy-to-operate,
easy-to-repair quenching machine, which adapt to the majority of
small and medium-sized enterprises and the heat treatment factory.
This series of machines mainly used in the processing of shaft,
gear parts, and some special workpiece can be processed. Adapted to
the high frequency power supply with high frequency, super audio,
IF, transistor matching, machine spray cooling. They adapted to
power supply with high frequency, super audio, medium frequency or
transistor. Machine tool is cooled by liquid spray.
1. The machine main power source is the hydraulic drive. The
workpiece is fixed by the above thimble and under thimble, overall
lifting driven by the oil motor.
2., The speed adjustment range is large.
3. The machine tool payload is large.
4, the device has a mechanical stop installed in the main column,
which used to prevent over-travel protection.
5. fuel-efficient valve: A: adjust fast rise(reset) speed. B:
adjust slow down(quenching) speed. C: adjust spindle (workpiece)
rotate speed.
6. In order to prevent the shaft parts ends hardening soft section,
we especially added "delay down" control by the time relay. After
heating a certain period of time, then began to decline and scan
hardening.
7. Spray quench cooling, no need to equip another work tank
8. Equip a water spray ring for gear workpiece, water spray and
quenching is controlled by time relay. The workpiece quality
control is accurate and consistent. This method also applies to
alloy steel
9. In the semi-automatic state, with one key operation function:
Once the key is pressed, workpiece rise reset -> induction
heating equipment start -> heating the end of workpiece, Sensors
began to spray -> delay decline -> slow down scan hardening
-> reach the terminal, stop heating and decline -> delay
spray, stop cooling. Throughout the quenching process is done
automatically, just re-clamping the next workpiece.
10. Suitable for reload workpiece, without the complexity quenching
process and the precision is not high occasions
Technical parameters:
Machine Model | Heated length mm | Clamping weight Kg | Feed speed mm/s | Reset speed mm/s | Rotate speed r/min | Size mm |
CD48-60F | 60 | 100 | 2~80 | 2~120 | 20~200 | 100×700×2000 |
CD48-100F | 1000 | 200 | 2~80 | 2~120 | 20~200 | 1200×850×2500 |
CD48-150F | 1500 | 200 | 2~80 | 2~120 | 20~200 | 1400×1000×3600 |
About Us
Customer Services
Sell On Us
Friendly Links: www.everychina.com
Français| Русский язык| Español| Português| 日本語
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们