Tp304l Astm A355 Sch40 Stainless Steel Pipe Elbow And Fittings Seamless

Tp304l Astm A355 Schedule Sch40 Stainless Steel Pipe Elbow and Fittings

ASTM A234 Alloy Steel Fittings ASTM A234 Alloy pipe fittings

DIAMENSION OF ASTM B366 GRADE WPNCMC FITTINGS~

ASTM A234 Scope:

1.1 This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, and MSS-SP-95. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. Fittings differing from these ASME and MSS Standards shall be furnished in accordance with Supplementary Requirement S58 of Specification A 960/A 960M.

1.2 Optional supplementary requirements are provided for fittings where a greater degree of examination is desired. When desired, one or more of these supplementary requirements may be specified in the order.

1.3 This specification does not cover cast welding fittings or fittings machined from castings. Cast steel welding fittings are governed by Specifications A 216/A 216M and A 217/A 217M.

1.4 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining

FAQ:

　　1. Are you a factory or trading company?

　　We are a factory.we also have cooperated factory doing other steel business.

　　2. How can I get a quotation from you ?

　　You can leave us message, and we will reply every message in time. Or we may talk on line by Trademanager.

　　And you can also find our contact information on contact page.

　　3.Can I get samples before order ?

　　Yes, of course. Usually our samples are free. we can produce by your samples or technical drawings.

　　4. what is your delivery time ?

　　The time of delivery is usually around 20 days(1*20FT as usual).

　　We can send out in 2 days, if it has stock.

　　5.What is your payment terms?

　　Our usual payment term is 30% deposite, and rest against B/L. L/C is also acceptatble.EXW,FOB,CFR,CIF,DDU.

　　6.How does your factory do regarding quality control?

　　Quality is priority. Our factory has gained ISO9001 authentication. We guarantee the goods out from our factory 100% qualified.

　　And Each Process, we have very strict operation and arrange 2 techinians to inspect. After the products are finished,

　　we will make the last test to pick up the unqualified products

　　The company is located in Wuliyao Industrial Park, Yanshan County, Cangzhou City, Hebei Province, China, with Beijing-Tianjin in the north and Huanghua Port in the east. The transportation is very convenient. The company covers an area of 130,000 square meters, of which the workshop area is 60,000 square meters. The company is equipped with more than 280 advanced production and testing equipment, including 20 500-10000 tons hydraulic presses, 40 various lathes, 6 gas heating furnaces, 10 heat treatment furnaces, 7 hydraulic pushing equipment, and more than 20 testing and inspection equipment. 

　    Our company has advanced production equipment, complete testing equipment and strong technical force. Independent construction of B-level technology research and development, main products (factory prefabrication of four major pipe fittings, elbows, flanges, elbows, tees, crosses, reducers, heads, supports and hangers, socket pipe fittings, Forged pipe fittings and other pipe fittings) with an annual output of more than 20,000 tons, which are widely used in pipeline engineering in petroleum, chemical, electric power, metallurgy, urban gas, thermal pipe network, shipbuilding and other industries. The company prepares more than 50,000 tons of various special steel pipes all year round, the materials of which are SA106B, 20G, Q345, 12Cr1MoVG, 15CrMoG, 1Cr5Mo, 1Cr9Mo, 10CrMo910, A335P5/P9/P11/P12/P22/P91/P92, WB36 and various austenitic Body stainless steel. The steel pipes are mainly produced in Tianjin Great Seamless, Shanghai Baosteel, Chengdu Steel and Vanadium, Yangzhou Chengde, Valin Henggang, Baotou Steel，and other well-known domestic，brands。And become the "special distributor" of the above-mentioned major steel pipe factories.

        In recent years, our company has consistently adhered to the business philosophy of occupying the market with excellent brands and winning customers with honesty and trust. Products are sold throughout the country and exported to Southeast Asia, Central Asia, North Africa, and South America. We adhere to sincere cooperation with customers with excellent products and good service to create a better future.