AUTEL MaxiDAS DS808S-TS Diagnostic Tool with Advanced ECU Coding & TPMS Services Upgraded of MP808S/ DS808TS

Product Description

AUTEL MaxiDAS DS808S-TS Diagnostic Tool with Advanced ECU Coding & TPMS Service

Together with the ability to quickly read and clear DTCs for all available modules of the majority of the makes and models on the market, MaxiDAS DS808S-TS provides superior special functions, including Oil Reset, EPB (Electronic Parking Brake), SAS (Steering Angle Sensor), and BMS (Battery Management System). In addition to OBDII diagnostics and special functions, DS808S-TS can perform comprehensive TPMS services with ease.




Autel MaxiDas DS808S-TS Highlights:

1. 99% of vehicles covered - Autel Scanner DS808S-TS is capable to diagnose almost all vehicles in the market, making it an one-for-all diagnostic scanner.
2. 1-Year Free Software Update -After 1 year, if you do not choose to continue to purchase the upgrade service, it will not affect the normal use of the device
3. A Key to Access On-board Systems - ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System.. Autel Newest Diagnostic tool MaxiPro MP808TS can solve the vast majority of problems with your vehicle.
4. Wireless Diagnosis - Conducting wireless diagnostics through VCI module, Newest diagnostic tool MP808TS will set you free from entangled wires.
5. Compelete TPMS Services - Same as MS906TS/ MS906 PRO-TS/ MK906 PRO-TS. Combination of MS906 and hand held TS601 which is a solid and well respected TPMS tool. As Advanced TPMS diagnostics for complete TPMS health check. Autel DS808S-TS can activate sensors, retrieve data, clone and program Autel MX-Sensors and pinpoint faults on exclusive TPMS Status Screen.
6. Bi-Directional Control - DS808S-TS builds a mutual communication with onboard ECUs and execute every single one of your commands
7. 30+ Special Functions - Autel DS808S-TS Supports 30+ commonly used hot functions to meet the needs of daily maintenance diagnostic and reset.
8. Multi-Languages support
9. Same ECU Coding Functions as Autel MaxiSys MS906BT/ MS906 PRO/ MS906 PRO-TS/ MaxiCOM MK906 PRO/ MK906 PRO-TS/ MK908/ MK908 II

Product Features:

• Compatible with Videoscope and MaxiBAS BT506 to perform Battery Tests and Analysis

Autel DS808S-TS: All Enhanced Hardware, 5X Faster than MS906TS/ MS906BT/ MP808TS



Autel MaxiDAS DS808S-TS: Comprehensive TPMS Solution Provider, Works Effectively Same as MS906TS/ MS906 PRO-TS/ MK906 PRO-TS

Autel DS808S-TS OE-Level Full Systems Diagnosis

The full system diagnostics give you a key to access every on-board system to root out those invisible problems such as PCM, ECM, EPS, PDM, BCM, TPM, SCCM, RADIO, etc. The Autel DS808S-TS can read and clear codes on all systems and subsystems so as to present you a clear picture of multiple sensors in different formats. And also it empowers you to read ECU information, live data and conduct active test.

Read DTCs – It can access to the depth of every onboard systems to read and analysis the DTCs
Clear DTCs – After tune-up or changing certain components, it can clear the DTCs hidden in the ECU and kill the lights on the dashboard.
ECU Information – get the retrieved ECU information in detail.
Live Data Stream – a valuable reference to determine the specific problems accurately.



Same ECU Coding Functions as Autel MaxiSys MS906BT/ MS906 PRO/ MS906 PRO-TS/ MaxiCOM MK906 PRO/ MK906 PRO-TS/ MK908/ MK908 II




Autel DS808S-TS with 30+ Maintenance Service

A well-bred horse deserves a good saddle. A real comprehensive OBD diagnostic scanner requires all-in-one functions.DS808S-TS diagnostic tool has been upgraded with over 31 service functions, such as Oil Reset, EPB, BMS, SRS, ABS Bleed, SAS Calibration, DPF Generation, Injector Coding, Throttle Matching, Suspension Matching, TPMS, etc. Moreover, DS808S-TS can be constantly upgraded with more functions to meet your various maintenance needs.

Oil Reset - Reset the oil life system and turn off the oil light after oil or oil filter replacements.
EPB - Reset the brake pad after replacing the brake pad, the servo motor, etc., deactivate/activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
BMS - Reset the monitoring unit of the car battery after replacing battery or battery monitoring sensors.,Brake/ABS Bleed: bleed the brake system when the ABS system contains air to restore its braking sensitivity.
DPF - Regeneration: clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.
Injector Coding - Write the actual code of the fuel injection nozzle or rewrite the code in the ECU to the code corresponding to the fuel nozzle of each cylinder after replacing the ECU and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder.
SAS Calibration - Calibrate the steering angle after replacing steering related parts.
Suspension Level Calibration - Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
Throttle Adaption - Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.
Sunroof Initialization - Initialize the sunroof data to set the sunroof lock off, close in rain, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
Seats Calibration - Specially designed for the seats with memory functions. Match the seat after repairing or replacing the seat.
And more...

Note: The reset service feature is not available on all models.



Autel DS808S-TS: More Extended Functions for Better Performance

Provide access to FCA cars with Autoauth, including Chrysler, Dodge, Jeep, Fiat etc made in and after 2018.
Compatible with Autel BT506 for battery & cranking test and MV108 for visual inspection.
Added with HDMI interface for easy demonstration on a larger screen.

JIU TECH Enterprise Co., Ltd specializes in development and production of auto diagnostic scanners and auto maintenance tools for years. We provide better quality products and service for our clients. OEM, ODM manufacturing service for business all over the world is appreciated. Our products have been delivered to Europe, America, Africa and Oceania, all over the world, bringing us annual export sales of $2 million last year.

 Emphasis on product quality

We develop and manufacture auto diagnostic tools, car keyless remote controller, car key shell, transponder key, remote key, remote control duplicator and other auto maintenance tools etc. To ensure the consistency of our product quality, Our QC members with five years' experience on average monitor the entire production process.

We also offer a one year warranty.

Emphasis on Management
We insist on high standard, scientific development thoughts, devoted to pursuing continuous creativity of technology and management. Relying on the advanced equipments and high & stable quality, We have been approved by ISO9001:2000, FCC, CE. We benefit all our customers without any trouble of product quality.

We possess an 800-square-meter factory equipped with five production lines. Our advanced equipment includes automatic chip SMT lines, dust-free vacuum refilling machines and dust-free vacuum packaging machines. We produce 1, 000 units every month. Our delivery lead time is just one or three working days for our standard products. OEM products lead time is only within 2 weeks..

Providing best products and best service is our company target. Contact us today by email or phone and start with a small order, you will find we are your most valuable cooperator.