Ip68 Bulk Thermal Silicone Molding Compound Gel Liquid For Ignition Coils Electronic Modules

1:1 Soft Silicone Compound For Ignition Coils Electronic Modules LED Ip68 Silicone Gel Transparent Liquid Ab Component Gel For Protective Electronic Potting Adhesive

Product Description:

This product is a very soft, low crosslinking density addition silicone rubber. It is a low-viscosity liquid before vulcanization. After vulcanization, in addition to the general characteristics of addition silicone rubber, it has good shock absorption, moisture resistance and sealing due to its soft nature. properties and excellent dielectric insulation properties over a wide range of temperature and humidity.

Product Features:

1. Medium temperature curing, the curing time can be adjusted according to different temperatures;

2. It is low-viscosity silicone oil before curing and gel elastomer after curing.

Product application:

The main application areas are the potting of electronic and electrical components and electrical assemblies. It is also used in occasions such as the potting of temperature sensors; it is used for the packaging of electronic transformers, AC capacitors, negative ion generators, aquarium water pumps, ignition coils, electronic modules, LED modules, etc.

Instructions:

1. Before mixing, component A needs to be properly stirred manually or mechanically, and component B should be fully shaken in a sealed state before use.

2. When it needs to be attached to the application material, please confirm whether it can be attached before use, and then apply it. 3. Before construction, please weigh and mix according to the weight ratio of A:B = 1:1, and stir thoroughly before applying glue.