800Mhz And 1.4Ghz Long Range Video And Control Data Transmitter For UAV

The FMS-8480 drone video downlink system provides a complete aerial video transmission solution, enabling real-time surveillance to support law enforcement, emergency response, and critical infrastructure monitoring.

This system features a fully integrated setup of downlink transmitters, receivers, and antennas, ensuring stable high-definition video streaming from UAV, helicopters, and other aircraft.

Additionally, the FMS-8480 supports full-duplex serial control data, allowing ground-based pilots to simultaneously manage flight operations and gimbal positioning.

Frequency Option

• 800Mhz
• 1.4Ghz
• FMS-8480 drone long range video transmitter uses the 806 to 826Mhz and 1428-1448Mhz frequency range to avoid interfering with aircraft control systems, which are usually 2.4 GHz

Key Features

• Ultra-lightweight onboard unit: Just 250g (8.8 oz)

• Multi-interface support:

  • Video input: HDMI, SDI, Ethernet

  • Control channel: Serial data (MAVLINK-compatible)

• Latency: End to end 50ms for 1080P30 video
• End to end 40ms for 720P60 video
• Up to 80km range (LoS )
• 1*LAN Port: TCPIP/UDP
• 2* Serial Ports: Bi-directional Data Transmission
• 2* Antennas: Dual Tx antenna and Dual Rx antenna

Application:

• FMS-8480 is a fully integrated, long range microwave transmitter, based on aircraft industry standards for ruggedness, size, and weight. Highly efficient H.264/ FPGA Encoding.
• FMS-8480 components include transmitter, receiver and antennas. It supports IP Camera, hdmi camera and SDI camera to access and control the flight and gimbal via TTL(3.3V) at same time for 80km. As shown in the following diagram:

Specification

  WHO WE ARE?

The original standard LTE network requires the participation and control of base stations and core networks in addition to terminals. Now each node of our star topology network devices and MESH network devices is a terminal node. These nodes are lighter and retain many advantages of the original LTE technology. For example, it has the same architecture, physical layer and subframe as LTE. It also has LTE’s other advantages such as wide coverage, high spectrum utilization, high sensitivity, high bandwidth, low latency, and dynamic power control.

Compared with normal wireless link, such as wireless bridge or other devices based on wifi standard, the LTE technology has a subframe structure, the uplink and downlink data rate is not same. This characteristic enable the wireless link products' application more flexible. Because the uplink and downlink data rate can be adjusted based on real service requirements.

In addition to the self-developed product series, IWAVE also has the ability to integrate upstream and downstream product resources in the industry. For example, based on self-developed 4G/5G industry products, IWAVE integrates wireless terminal products and industry application platforms, thereby providing terminals - base stations - core networks - End-to-end customized products and industry solutions for industry application platforms. IWAVE focuses on serving domestic and foreign industry partners, such as special industry communications fields such as park ports, energy and chemicals, public security, special operations, and emergency rescue.

HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?