Explosion-Proof Hydrogen Purification System: High-Purity H₂ Solutions for Industrial Safety & Efficiency

In industrial environments where hydrogen is a critical resource—from fuel cell production to chemical processing—safety, purity, and reliability are non-negotiable. Our Explosion-Proof Hydrogen Purification System is engineered to address these demands, delivering ultra-high-purity hydrogen (up to 99.9999%) while ensuring compliance with global safety standards. Designed for hazardous zones and harsh conditions, this system integrates advanced adsorption, catalytic reaction, and automation technologies to redefine industrial hydrogen purification.

Key Features & Advantages

1. Explosion-Proof Design for Hazardous Environments

Safety is paramount in hydrogen applications, and this system is built to excel in high-risk settings. It features an EX-type control panel and EX-rated electrical components certified to ATEX 2014/34/EU, IEC 60079, and GB 3836 standards, ensuring safe operation in Zone 1/2 hazardous areas where flammable gases may be present. All electrical parts also boast an IP65 ingress protection rating, shielding against dust, water jets, and extreme industrial conditions—guaranteeing durability in even the most demanding environments.

2. Dual-Tower Drying System for Ultra-Low Dew Point

Moisture is a critical enemy of hydrogen purity, causing corrosion, catalyst poisoning, and equipment failure. Our system eliminates this risk with a dual-tower drying configuration filled with high-performance adsorbents (e.g., molecular sieves). The towers operate in alternating cycles: one dries the hydrogen stream, while the other undergoes automatic regeneration (150–180°C) to remove adsorbed moisture. This ensures continuous, unattended operation and delivers hydrogen with a dew point of ≤ -70°C at 1 ATM—critical for sensitive applications like electronics manufacturing and fuel cell technology.

3. Room-Temperature Oxygen Removal for PPM-Level Purity

Oxygen contamination can compromise hydrogen quality and safety. Our system integrates a specialized oxygen removal tower with palladium-based catalysts, enabling efficient O₂ elimination at ambient temperature. Oxygen reacts with residual hydrogen to form water, which is then adsorbed by the drying towers, reducing oxygen levels to ≤ 1 ppm. This process ensures the final hydrogen stream meets the strict purity requirements of industries like semiconductor fabrication and green hydrogen storage.

4. PLC Automation for Unattended, Energy-Efficient Operation

Minimizing human intervention and optimizing performance, the system is controlled by a programmable logic controller (PLC) that automates the entire purification cycle—including adsorption, regeneration, and tower switching. This reduces human error, cuts energy costs, and allows seamless integration with SCADA or industrial monitoring systems. The EX-type control panel provides real-time data on pressure, temperature, dew point, and system status, with alarm functions for abnormal conditions (e.g., high pressure, low flow), ensuring operators stay informed and in control.

Technical Specifications

Frequently Asked Questions (FAQ)

Q1: Which industries benefit most from this system?

A: The system is ideal for fuel cell production, semiconductor manufacturing, metallurgy (annealing), laboratory research, and green hydrogen projects (electrolyzer downstream purification). Its explosion-proof design makes it critical for oil & gas, chemical processing, and mining sectors where hazardous environments are common.

Q2: How often is maintenance required?

A: Routine maintenance is minimal: adsorbents are replaced every 2–3 years (depending on inlet conditions), and filters are checked every 6 months. The PLC-controlled regeneration cycle reduces manual upkeep, ensuring >95% uptime.

Q3: Can the system handle variable inlet flow rates?

A: Yes. It features adjustable flow control valves to accommodate fluctuations within ±20% of the rated flow. For extreme variations, custom sizing is available to meet specific operational needs.

Q4: Is the system energy-efficient?

A: Absolutely. The dual-tower design ensures continuous operation without downtime, and waste heat recovery in the regeneration cycle minimizes energy use—making it more efficient than single-tower batch systems.

Q5: Does the system comply with international safety standards?

A: Yes. It is fully certified to ATEX 2014/34/EU, IEC 60079, and GB 3836, ensuring compliance in global markets.

Why Choose Our System?

Our Explosion-Proof Hydrogen Purification System combines uncompromising safety, ultra-high purity output, and automated efficiency to meet the evolving needs of modern industry. Whether you’re scaling green hydrogen production or ensuring precision in electronics manufacturing, this system delivers reliable, cost-effective performance while adhering to the strictest global safety norms.

Contact us today to customize a solution tailored to your flow rate, purity, and certification requirements.

Keywords: Explosion-proof hydrogen purifier, high-purity hydrogen system, ATEX-certified hydrogen purification, dew point -70°C hydrogen dryer, PLC-controlled hydrogen purification, industrial hydrogen purification equipment.

Suzhou GASPU Gas Technology Co., Ltd. was founded in 2001 in Suzhou Overseas Students Entrepreneurship Park and registered in Suzhou National High Tech Industrial Development Zone. The company has established long-term cooperative relationships with domestic and foreign research and development institutions such as SAES, SEMIGASSYSTEM, BOISTON, AIRTECH, UOP, GARBOTECH, BURKERT, etc., continuously innovating in gas and air purification treatment technologies, and developing leading new technologies and products domestically.

With a group of professional personnel engaged in the research, promotion, and production of pressure swing adsorption technology, and the efforts of all colleagues to explore and adhere to the principle of customer first, GASPU has developed into a professional air separation equipment supplier with a certain scale in China, integrating scientific research and production. It can provide PSA carbon molecular sieve nitrogen production equipment, membrane separation nitrogen production equipment, and ammonia decomposition hydrogen production equipment to a large number of users, Hydrogen purification products, and various gas supply solutions can be provided according to user requirements.

The company has been self-purchasing land in Suzhou High tech Zone since 2003 and owns a professional production base of 8000 square meters for nitrogen generators and ammonia decomposition hydrogen production equipment. The equipment is widely used in industries such as petrochemicals, electronics, pharmaceuticals, food preservation, and new materials, providing overall solutions for industries and fields that require the use of protective atmospheres. Some customers include Ma-steel Hefei, DSM Chemical, BASF Chemical, BP, and CNOOC Zhejiang Wan-Xiang, Jing-Neng Group, Shanghai Electric, China DATANG, State Power Investment Corporation, Shenzhen Foxconn, etc. have stable and safe equipment operation.

Looking forward to GASPU being your better choice!

https://www.youtube.com/@gaspu