Multi-Component Gas Leak Detector LF-01-FR (Suitable for
SF₆/SO₂/CH₄/CO₂ & More Gases)
The LF-01-FR Multi-Component Gas Leak Detector is a versatile gas
detection device integrating Dual Detection Technologies: Infrared
(NDIR) and Electrochemistry. Its core advantage lies in the ability
to accurately capture leak signals of multiple gases
simultaneously, adapting to complex industrial environments such as
high/low temperature, high humidity, and high dust. Combining fast
response, user-friendly operation, and intelligent data management,
it provides an efficient solution for gas safety monitoring in
industries like petroleum, electric power, and chemical
engineering.
I. Core Product Advantages
1. Infrared Precision Detection with Strong Anti-Interference
Capability
Equipped with an NDIR (Non-Dispersive Infrared) sensor, it enables
high-precision measurement for infrared-sensitive gases (e.g., SF₆,
CO₂, CH₄):
- Automatically filters environmental impurities such as oil, water,
and dust, preventing interference signals from affecting detection
results;
- Features fast response speed, allowing quick localization of leak
points and reducing the risks of missed detection and false
detection.
2. Humanized Design for Easier Operation and Portability
- Clear Visual Interface: Equipped with a 3.5-inch HD color display
(resolution: 480×320), which intuitively presents real-time data,
concentration curves, alarm status, and other information without
complicated interpretation;
- Low-Power & Efficient Control: Pure hardware one-key on/off design
reduces unnecessary power consumption and extends battery life;
- Flexible Adaptation to Complex Scenarios: Optional long-handle
suction probe tube for easy access to hard-to-reach areas such as
equipment gaps and high-altitude pipelines;
- Portable Mobility: Comes with a standard leather shoulder bag; the
whole machine weighs only about 500g, facilitating on-site
personnel to operate it by hand or carry it on the shoulder.
3. Comprehensive Functions to Meet Diverse Detection Needs
- Multi-Dimensional Data Presentation: Simultaneously displays
real-time detection values and concentration change curves,
enabling intuitive grasp of gas leak trends;
- Flexible Sampling Adjustment: Built-in adjustable speed air pump
(0-500cc/Min) for flexible switching between high and low sampling
speeds according to leak scenarios;
- Simultaneous Multi-Gas Detection: Supports simultaneous detection
of up to 4 infrared-sensitive gases (configurable on demand),
eliminating the need for frequent equipment replacement;
- Intelligent Data Management:
- Supports Chinese/English interface switching and automatic gas unit
conversion (calculated by the intelligent system);
- Standard 8G SD card for data storage (16G/32G optional); recording
interval is customizable for long-term storage of massive data;
- Enables fast data export (in TXT format) via Micro-USB and Android
data cables; optional external Bluetooth printer for on-site
instant printing of detection reports;
- Strong Environmental Adaptability: Combined with a sampling probe
gun, it can work stably in high-temperature (-20℃~50℃, up to 1200℃
with flue gas probe gun), high-humidity (0-95%RH, non-condensing;
optional filter for high humidity), and high-dust environments.
II. Detailed Technical Specifications
Category | Specific Parameters |
---|
General Specifications | - Dimensions: 231×86×52mm (H×W×D) - Weight: ~500g - Pump Flow Rate: 0–500 cc/Min (adjustable) - Display: 3.5-inch color screen (480×320 resolution) - Display Content: Gas formula, measured value, unit, concentration
curve, battery status, time, alarm/fault information - Alarms: Buzzer, red indicator light, LCD prompt, low battery
alarm - Data Storage: 8G SD card (standard), 16G/32G optional;
customizable recording interval - Data Transmission: USB connection, supporting TXT format download - Printing: Optional external Bluetooth printer - Power Supply: 6000 mAh rechargeable lithium battery (with
Micro-USB 5V/2A charger) |
Environmental Adaptability | - Humidity: 0–95%RH (non-condensing; optional filter for high
humidity) - Temperature: -20℃~50℃ (up to 1200℃ with flue gas probe gun) |
Certifications & Protection | - Explosion-Proof Rating: Ex ia IIC T4 - Protection Level: IP65 (dustproof and waterproof) |
III. Applicable Gases & Sensor Parameters
The device supports four detection principles: Infrared (NDIR),
Electrochemistry, PID (Photoionization), and Catalytic Combustion,
covering a variety of common gases. The specific adaptation list is
as follows:
Detected Gas | English/Formula | Measuring Range (Optional) | Sensor Principle |
---|
Sulfur Hexafluoride | SF₆ | 0-1000ppm / 0-2000ppm | Infrared (NDIR) |
Carbon Dioxide | CO₂ | 0-2000ppm / 0-5000ppm / 0-1%VOL / 0-5%VOL / 0-20%VOL / 0-50%VOL /
0-100%VOL | Infrared (NDIR) |
Methane | CH₄ | 0-5%VOL / 0-10%VOL / 0-20%VOL / 0-50%VOL / 0-100%VOL | Infrared (NDIR) |
Carbon Monoxide | CO | 0-200ppm / 0-1000ppm | Electrochemistry |
Carbon Monoxide (with H₂ Compensation) | CO (H₂ Compensated) | 0-200ppm / 0-1000ppm | Electrochemistry |
Hydrogen Sulfide | H₂S | 0-50ppm / 0-100ppm / 0-200ppm / 0-1000ppm / 0-5000ppm | Electrochemistry |
Oxygen | O₂ | 0-25%VOL | Electrochemistry |
Nitrogen Dioxide | NO₂ | 0-20ppm / 0-500ppm | Electrochemistry |
Nitric Oxide | NO | 0-100ppm / 0-1000ppm | Electrochemistry |
Sulfur Dioxide | SO₂ | 0-20ppm / 0-100ppm / 0-2000ppm | Electrochemistry |
Chlorine | Cl₂ | 0-20ppm / 0-200ppm / 0-2000ppm | Electrochemistry |
Ammonia | NH₃ | 0-100ppm / 0-1000ppm / 0-5000ppm | Electrochemistry |
Hydrogen | H₂ | 0-1000ppm / 0-10000ppm / 0-40000ppm | Electrochemistry |
Hydrogen (with CO Compensation) | H₂ (CO Compensated) | 0-1000ppm | Electrochemistry |
Phosphine | PH₃ | 0-5ppm / 0-20ppm / 0-1000ppm | Electrochemistry |
Formaldehyde | CH₂O | 0-10ppm / 0-50ppm / 0-1000ppm | Electrochemistry |
Ozone | O₃ | 0-5ppm / 0-20ppm / 0-100ppm / 0-1000ppm | Electrochemistry |
Fluorine | F₂ | 0-1ppm | Electrochemistry |
Hydrogen Fluoride | HF | 0-10ppm | Electrochemistry |
Hydrogen Chloride | HCl | 0-20ppm / 0-200ppm / 0-1000ppm | Electrochemistry |
Ethylene Oxide | ETO | 0-20ppm / 0-100ppm | Electrochemistry |
Silane | SiH₄ | 0-50ppm | Electrochemistry |
Chlorine Dioxide | ClO₂ | 0-20ppm / 0-200ppm / 0-2000ppm | Electrochemistry |
Hydrogen Cyanide | HCN | 0-100ppm | Electrochemistry |
Ethylene | C₂H₄ | 0-10ppm / 0-200ppm / 0-1500ppm | Electrochemistry |
Hydrogen Peroxide | H₂O₂ | 0-100ppm / 0-500ppm / 0-2000ppm | Electrochemistry |
Flammable Gas | EX | 0-100%LEL | Catalytic Combustion |
Tetrahydrothiophene | C₄H₈S | 0-50mg/m³ | Electrochemistry |
Volatile Organic Compounds | VOC | 0-20ppm / 0-200ppm / 0-2000ppm / 0-10000ppm | PID (Photoionization) |
IV. Application Scenarios
Petroleum, petrochemical, metallurgy, chemical industry, fire
protection, gas industry, environmental protection, electric power,
telecommunications, papermaking, printing and dyeing, sewage
treatment, food brewing, scientific research, education, national
defense.
V. Instrument Configuration
Standard Configuration
Detector main unit, operation manual, detection report, certificate
of conformity.
Optional Accessories
Calibration gas, sampling probe tube, external Bluetooth printer,
etc.