0.4KW 1000kg Load Bend Testing Machine With Servo Motor Drive
|
0.4KW 10KN Glass Bend Testing Machine With Special Jig Servo Motor Drive Product Description The bend testing machine is used to test bending fatigue, bend strength of brittle materials, such as ceramics, glass, timber. The bend testing can do test of ......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
IEC 60309-1 Vehicle Charging Interface Cable Bending Test Equipment With Load
|
...Bending Test Equipment With Load Product Overview For Vehicle Charging Interface Cable Bending Test Equipment: The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2020 clause 26.4 figure 20, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test......
Sinuo Testing Equipment Co. , Limited
|
Cord Bend Test Equipment / Tensile testing machine 10 - 40 mumbers/min Speed
|
... cable forward to the center of the turnplate. Pull the cable vertically with load at rated bending speed, angle and times then to begin the bending test. When the tester stops automatically, check the jacket damage and the breakage rate of conductors....
Infinity Machine International Inc.
|
Bend Testing Equipment
|
...Bending Testing Equipment Product Description: The general swing tester can only be judged as unable to pass the test when it oscillates completely. It is different for this table load tester. When we set a certain current, it cannot withstand even if it is not completely shaken off. The set load current also fails the test. Meet the standard: meet the GB2099, UL817, VDE0620 standard load......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
ASTM D5182 FZG Method Lubricating Oil Scuffing Load Capacity Testing Equipment
|
...Load Capacity Testing Equipment Introduction FZG gear wear test machine is a multi-purpose testing machine.It can be used for the evaluation of the scuffing load capacity of the lubricant, also can be customized according to client’s demands. It is usually using for gear bending fatigue strength and gear touch fatigue strength test. This FZG scuffing load capacity testing equipment......
Advanced Instruments Co.,Limited
|
50T Computer Control Material Bending Testing Equipment
|
... and mechanical transmission.it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control, it also can be tested the constant-velocity loading, constant- velocity displacement....
jinan hardness STING EQUIPMENT CO., LTD
|
3mm Impact Head Bending Test Equipment , CE Welding Bend Test Machine
|
...Bending Test Equipment Application This test equipment is suitable for testing mobile phones, tablets and mobile phone batteries. In the normal daily use of the simulated sample, test the degree of bending and damage to the sample caused by the impact, and use the test result as the basis for improving the strength performance of the product. Principle Place two acrylic round rods at a certain distance horizontally to support the test...
SKYLINE INSTRUMENTS CO.,LTD
|
C60598-1 Clause 4.14.3 Bending Test Equipment For Adjusting Luminaire
|
Bending Test Equipment for Adjusting Luminaire Conforms to IEC60598-1 Clause 4.14.3 1. Introduction The bending test equipment for adjusting luminaire is designed to meet the test requirement of IEC60598-1 clause 4.14.3. The flexible cord or cable of adjusting luminaire shall have no more than 50% of the strands in a conductor be broken and no serious damage to the insulation after continuously bending......
Pego Electronics (Yi Chun) Company Limited
|
Automatic Cable Wire Lab Plug Bend Testing Equipment AC 220V 10 ~ 60 times / min
|
...Test Equipment Plug Bend Testing Equipment Application: Automatic Cable Wire Lab Test Equipment Plug Bending Tester is applied for bending endurance test for wire connected with plug. This device is designed and manufactured to meet the requirements of UL817, IEC60884, GB2099. Features: 1. Operated by buttons. 2. When test......
ASLi (CHINA) TEST EQUIPMENT CO., LTD
|
IEC-60794-1-2 Standard Fiber Optic Cable Repeated Bending Test Equipment
|
... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and...
Dongguan Wirecan Technology Co.,Ltd.
|
Submit your “1000kg load bending testing equipment” inquiry in a minute :