50 Watts 3.8GHz Dummy Load For Amplifier Testing
|
...4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy...
HeFei Vinncom Science And Technology Co.,LTD
|
30 Watt Mini 4.3-10 Female Dummy Load For Amplifier Testing
|
30 Watts 4.3-10 Female 3.8GHz 4GHz RF Dummy Load Termination Better heating shrink Wide band Good VSWR Part Number VN-LD-4G-30W-OPf Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
DC-3Ghz 5W 7/16 Din Male Connector Coaxial RF Dummy Load with 50 ohm
|
...Dummy Load with 50 ohm 1. The function of termination/dummy load? a. to test a radio transmitter ,it acts as a protector to be a substitute of antenna. 50ohm dummy load provides proper resitance at final RF amplifier stage b. to prevent away from other radios interference when ajusting and testing the transmmiter c. to be a replacement of the loudspeaker during audio amplifier testing......
SHENZHEN ZD TECH CO., LTD
|
Low VSWR 100Watt DC 4GHz RF Termination 50 Ohm 6.35*6.5mm
|
... COMPONENTS Features: • DC – 4.0 GHz • 100 Watts • BeO Ceramic • Non-Nichrome Resistive Element • Low VSWR • 100% Tested (Chip Terminations) Power Rating Frequency VSWR Dimensions(mm) Model (W) (GHz) (Max) W L H A...
Shenzhen Yulongtong Electron Co., Ltd.
|
Submit your “4ghz dummy load for amplifier testing” inquiry in a minute :