Floor Adjustable Support Props 2.5-4.0m Cup Type Nut For Building Construction
|
Adjustable Floor Shoring Props With Cup-type Nut For Building Construction Adjustable props are used for supporting work in buildings construction, with working height range from 0,50-0,80 m up to 3,00-5,50 m. Two end plates, upper and lower plates, serve to give stability to the steel prop. The inner tube is Ø 48 mm (thickness from 2 mm to 4.0mm) with holes to adjust......
HORIZON FORMWORK CO., LTD.
|
High Strengh Scaffolding Steel Props Adjustable Support Props SGS Approved
|
... 4.0M 48MM*2.0MM 60MM*2.0MM 3.0M 5.0M 48MM*3.5MM 60MM*3.5MM Light duty steel shoring prop: MIN MAX INTERNAL TUBE EXTERNAL TUBE 1.6M 3...
Guangzhou Jet Scaffold & Formwork System Co., Ltd.
|
Metal Construction Scaffold Spare Parts Telescopic Adjustable Steel Props Support
|
...structural support. It can adapt to the vertical support of floor formwork of any shape. Its support is simple and flexible, easy to install, and is a support component integrating economy and practicality. It is a formwork support system with low cost and...
Cangzhou Weisitai Scaffolding Co., Ltd.
|
Adjustable scaffolding prop for slab formwork construction, decking support, post shoring
|
...) : 40/48/60 Outer tube dia(mm) : 48/56/60/75 Wall thickness : from 1.6mm to 4.0mm Adjustable device : Nut style, Cup style Surface finished : painted / galvanized Special requirment available upon request. Can match well with doka or ......
HORIZON FORMWORK CO., LTD
|
1600-2700 mm Adjustable Telescopic Steel Support Prop Acrow Jack Prop
|
Adjustable Telescopic Steel Support Acrow Jack Prop An Acrow prop is a piece of construction equipment. It is a telescopic tubular steel prop, used as a temporary support for concrete slabs and beams. One piece of Scaffold Acrow Prop include outside tube, inner tube, thread tube, collar nut, tie bolt, top plate and base plate Specification of Adjustable Telescopic Steel Support Acrow Jack Prop......
Zhengzhou Duorui enterprise Co., Ltd
|
Pillar Bracing Slab Support Material Struts Steel Adjustable Shoring Props
|
...Props are used in the construction industry for temporary support of ceilings, walls and trenches (shoring). Shoring Props application:increase load and reduce cost. Material:steel Q235 or Q345, both of which are commonly used in the industry. Product Name Adjustable Shoring Props Support Pillar Bracing Struts Material Q235 Height Customized Application Support......
FAMOUS Steel Engineering Company
|
Q235 Q345 Scaffolding Spare Parts Adjustable Scaffolding Prop Sleeve
|
... a slot in the outer section and a hole in the inner section for coarse adjustments. The casting collar located below the pin gives fine adjustment for leveling or striking. Rolled thread ensures no loss of material or strength at this critical point. And...
Hunan Liangming Metal Material Co., Ltd.
|
Telescopic tubular props, adjustable decking props, prop with covered thread
|
...(mm): 48/56/60/75 Tube thickness: from 1.6mm to 4.0mm Adjusting type: Cup type(inner thread) and Nut type(outer thread). Surface finished: painted / powder coated / galvanized ......
HEBEI LONGQUAN INDUSTRY CO., LTD.
|
Heavy duty painted galvanized adjustable steel prop with length 2.0-3.5M for construction template
|
Heavy duty painted galvanized adjustable steel prop with length 2.0-3.5M for construction template Introduction for steel shoring prop Adjustable steel shoring prop is one of the most popular scaffolding materials in constructions field, especially in ......
Gainford Equipment (Dongguan) Limited
|
Scaffolding Formwork Accessories Adjustable Shoring Support Prop Sleeve
|
Scaffolding Parts Formwork Accessories Adjustable Shoring Support Prop Sleeve Product Details 2.5mm Thick Weight 3.0mm Thick Weight 3.5mm Thick Weight Length 200mm 0.58kg Length 200mm 0.72kg Length 200mm 0.78kg Length 210mm 0.62kg Length 210mm 0.76kg ......
Sunrise Foundry CO.,LTD
|
Submit your “adjustable support props” inquiry in a minute :