TC-OAH061 Honeywell 6 GALVANICALLY ISOLATED CHANNELS CURRENT LOOP MODULE
|
...GALVANICALLY ISOLATED CHANNELS CURRENT LOOP MODULE Quick Details TCOAH061 DISCONTINUED BY MANUFACTURER ANALOG OUTPUT MODULE 6 GALVANICALLY ISOLATED CHANNELS CURRENT LOOP MODULE 4-20 MA 13 BITS FACTORY WARRANTY DOES NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED OTHER SUPERIOR PRODUCTS Yasakawa Motor, Driver SG- Mitsubishi Motor HC-,HA- Westinghouse Modules 1C-,5X- Emerson VE-,KJ- Honeywell TC-,TK- GE Modules IC - ABB Module......
Wisdomlong Technology CO.，LTD
|
Honeywell TC-OAH061 Analog Output Module 6 Galvanically Isolated Channels Current Loop Module
|
... of Points : 6 galvanically isolated channels Output Current Range : 0 to 21.0 mA Current Resolution : 13 bits across 21 mA Output Overvoltage Protection : 24 VAC/VDC continuous at room temperature RFI ......
Shenzhen Wisdomlong Technology CO.,LTD
|
TC-OAH061 HONEYWELL Analog Output, 6-Point, Current Loop (4-20 mA) Module (Isolated)
|
...Current Loop (4-20 mA) Module (Isolated) Analog Output, 6-Point, Current Loop (4-20 mA) Module (Isolated) Number of Points 6 galvanically isolated channels Output Current Range 0 to 21.0 mA Current Resolution 13 bits across 21 mA (2.7 mA) Open Circuit Detection None Output Overvoltage Protection 24 VAC/VDC continuous at room temperature Open Short Circuit Protection Electronically current......
MOORE AUTOMATION LIMITED
|
Flexible Assembly Hall Effect Current Sensor Module 40A Magnetic Balance
|
...current sensor module HBC-DSR5, analog voltage output magnetic sensor HBC-DSR5 Series current sensor with a galvanic isolation between primary and secondary circuit. Current sensor provides accurate electronic measurement of DC, AC or pulsed currents. Features: 1. Magnetic balance ( Hall effect closed loop......
Shaanxi Shinhom Enterprise Co.,Ltd
|
FOXBORO FBM203 CHANNEL ISOLATED 8 INPUT RTD MODULES FOXBORO 200 SERIES SCHNEIDER ELECTRIC
|
... a 0 to 320 ohm (FBM203), 0 to 640 ohm (FBM203b), or 0 to 30 ohm (FBM203c) resistance range. Each input channel of the FBM203d accepts a 4-wire RTD sensor input, within a 0 to 320 ohm resistance range. Each analog input is galvanically isolated from...
Sumset International Trading Co.,Ltd
|
2 Channels Digital Signal Isolator Modbus I/O Module Dry Contact Output CE Approval
|
...Isolator Remote I O Module Digital Input Switch Input Dry Contact Output 2ch Input Input signal: switch, proximity switch, frequency ≤ 10Hz Distribution voltage: ≈8V (when open) Short circuit current: ≈8mA Output Relay output Characteristics: Response time: ≤20mS Drive capacity: 2A/250V AC; 2A/30V DC Load type: resistive load Input and output characteristics (when set to in-phase control): The field switch is closed or the input loop...
Shenzhen Qianhai Lensen Technology Co., Ltd
|
Allen-Bradley 1756-IF16 Non-isolated Analog Voltage/Current Input Modules
|
... or the RTB has been removed from the module. When a wire-off condition occurs for this module, two events occur: • Input data for that channel changes to a specific scaled value. • A fault bit is set in the owner-controller that can indicate the...
Joyoung International Trading Co.,Ltd
|
8 Channel Arduino Relay Module DC5V / 12V / 24V With Optocoupler Isolate
|
... Description * SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA * Each channel module can be set high or low triggered by jumper * Fault-tolerant design, even if the control line is broken, the relay will not...
Oky Newstar Technology Co., Ltd
|
EX Series Digital 16 Channel I/O Modules Multichannel DO Module PNP EX-310H
|
...Channel DO Module,PNP EX-310H Product name EX-310H Current Consumption 72mA Number of Input Channel 16 Input Signal Type PNP Rated Input Voltage PNP:24V DC(±25%) Single-channel Rated Current Max:0.5A (Total Output Current of 8 Channels at the same time:2A) Load type Resistive load, inductive load, lamp load Isolated withstand voltage 500V Debounce time Configurable :1 ～ 10ms, Default :3ms Isolated......
Nanjing Decowell Automation Co., Ltd.
|
GE FANUC 8206-TI-IS PAC8000 CHANNEL INTRINSICALLY SAFE MODULE
|
...CHANNEL INTRINSICALLY SAFE MODULE Technical Application The PAC8000 Railbus Isolator is required when using any 2/1 modules in a node . The unit provides galvanic isolation between those modules interfacing to Intrinsic Safe field wiring on the 2/1 side of the isolator......
Wuhan Sean Automation Equipment Co.,Ltd
|
Submit your “galvanically isolated channels current loop module” inquiry in a minute :