Small Aperture 3NH Digital Gloss Meter NHG60M With PC Software , Gloss Measurement Units
|
... meters. Small aperture -- means that such gloss meters have a measurement aperture that is smaller than Conventional 85° gloss meter measurement aperture is 5*36mm, while the small aperture gloss meter NHG60M measurement aperture only 1.5*2mm. So named...
Shenzhen ThreeNH Technology Co., Ltd.
|
Ceramic Tile Multi Angle Gloss Meter , Gloss Measurement Units 0.5s Test Time
|
...Gloss Meter Readings With Large Battery Capacity Introduction: Gloss meters are mainly used in the surface gloss measurement for paint, plastic, metal, ceramics,granite tiles, building materials and so on. Our gloss meter conform to the DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards and so on. And The single angle glossmeters could be widely used for measuring......
CHNSpec Technology （Zhejiang）Co.,Ltd
|
Accurate Smart Gloss Measurement Units Three Angle With USB Data Port
|
... 85° Comply with Standard ISO 2813, GB/T 9754, ASTM D 523, ASTM D 2457 Measuring Area 20°: 10x10mm 60°: 9x15mm 85°: 5x36mm Measuring Range 20°:0~2000GU 60°:0~1000GU 85°:0~160GU Division Value 0.1GU Measurement Range Repeatability Reproducibility 0...
Shenzhen ThreeNH Technology Co., Ltd.
|
Car Paint Surface Gloss Measurement, Gloss Meter, Digital Gloss Tester RG-B206085
|
...Gloss Measurement, Gloss Meter, Digital Gloss Tester RG-B206085 Standard International standard ISO2813, ASTM-D2457, DIN67530 and China standard GB9754, GB9966, GB8807. The technical parameters follows China metrology standard JJG696-2002. Application 1. Measurement of Paint and Dope surface gloss on Car, Electronic appliance and Musical instrument industry. 2. Measurement of floor board, marble, granite and ceramic tile gloss...
RAYTECH NDT INSTRUMENT CO.,LTD
|
Precision Intelligent Glossmeter From Matt To High Gloss Measurements
|
...: This portable intelligent glossmeter has a wide range of applications from matt to high gloss measurements, with advanced touch screen technology and ideal for production and laboratory. Samples can be measured separately at each angle or at 2 or...
HUATEC GROUP CORPORATION
|
0-1000GU 60° Japan Sensor Gloss Meter Surface Gloss Measurement For Tile Electroplate Ceramics
|
...Gloss Meter OVERVIEW Gloss meters are mainly used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter conform to the DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards and so on. FEATURES 1). High Precision Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure high precise of the measured......
Beijing HiYi Technology Co., Ltd
|
]BW-IMU200 Low-Cost Inertial Measurement Unit IMU RS232/RS485/TTL Optional
![China ]BW-IMU200 Low-Cost Inertial Measurement Unit IMU RS232/RS485/TTL Optional on sale](https://img.chinaqualitylighting.com/nimg/bc/52/568d5171d925995c8657bf24b43b-300x300-0/bw_imu200_low_cost_inertial_measurement_unit_imu_rs232_rs485_ttl_optional.jpg "China ]BW-IMU200 Low-Cost Inertial Measurement Unit IMU RS232/RS485/TTL Optional on sale")
|
...Measurement Unit Introduction BW-IMU200 uses highly reliable MEMS accelerometers and gyroscopes, and it uses algorithms to ensure measurement accuracy. BW-IMU200 is a high-precision inertial measurement unit that can measure the angular velocity and acceleration of a moving carrier. At the same time, the sealing design and strict production process ensure that the product can accurately measure......
Wuxi Bewis Sensing Technology LLC
|
Precision Intelligent Glossmeter From Matt To High Gloss Measurements
|
...: This portable intelligent glossmeter has a wide range of applications from matt to high gloss measurements, with advanced touch screen technology and ideal for production and laboratory. Samples can be measured separately at each angle or at 2 or...
HUATEC GROUP CORPORATION
|
ISO2813 Package Testing Equipment For Gloss Measurement Static Friction Coefficient test 180mm×630mm ≤2mm ±0.001
|
ISO2813 Package Testing Equipment Gloss Measurement Static Friction Coefficient Model: IN-3011 Purpose: Friction tester is researched and developed aimed at testing the dynamic and static friction coefficient of plastic film and sheeting, rubber, paper, ......
Infinity Machine International Inc.
|
MEMS Inertial Measurement Unit , Multi Degree IMU Inertial Measure Unit
|
...tem with a built-in three-axis gyroscope, a three-axis accelerometer, a three-axis magnetometer and a pressure sensor for measuring the three-axis angle of the carrier parameters such as rate, acceleration, three-axis magnetic field, air pressure, etc.,...
Shenzhen Fire Power Control Technology Co., LTD
|
Submit your “gloss measurement units” inquiry in a minute :