IEC 62368 Test Equipment.IEC 62368-1 TESTING AND MEASURING EQUIPMENT
|
IEC 62368 Test Equipment.IEC 62368-1 TESTING AND MEASURING EQUIPMENT No. Items Description 1 Temperature and humidity chamber IEC62368-1-cl.4.1.4 Model:KP-HWS1000L 2 Test Apparatus for device forming mains plug IEC62368-1-cl.4.7 Model :KP-LJ220 Technical Parameter: 1. As per IEC60065-fig11 2. Weight: 1N, 2N. 3. Socket:UK, EU. 4. Arm of force 0-320mm 5.mension: 350*150*150 mm 3 Jointed test probe......
KingPo Technology Development Limited
|
IEC 62368-1 Test Equipment Annex T10 Glass Fragmentation Test Square Of 50mm Side
|
... with a center punch placed approximately 15mm in front the midpoint of one of the longer edges of the test sample. After a maximum of 5 min of fracture, and without using any aid to vision, except spectacles if normally worn, the particles are counted in...
Sinuo Testing Equipment Co. , Limited
|
80mm Blunt Probe As Per IEC 60950 IEC 60065 IEC 62368-1 For Testing TNT Circuit
|
Blunt Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3, UL6500 figure B.1, IEC62368-1 figure V.3. It is applied to ......
Pego Electronics (Yi Chun) Company Limited
|
Standard Test finger probe,test probe B iec 61032 EN60335,testing probe
|
... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....
ALLIED TESTING (HK) CO.,LTD.
|
EU Portable Energy Storage Certification LVD 2014/35/EU EN IEC 62368 Lighting Test
|
...IEC 62368) Some EU Portable Energy Storage Certification experimental methods: Overcharging of rechargeable battery pack. The battery pack is charged only to withstand any single fault condition that may occur in the charging circuit and can cause the battery pack to overcharge. To minimize the test......
Shenzhen LCS Compliance Testing Laboratory Ltd.
|
IEC Standard Articulated Test Probe with 10N Thrust, IEC 61032
|
...standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Jointed Test Finger was made on stainless steel and Polyamide handle. Material: Stainless Steel. Handle: Polyamide....
HK LEE HING INDUSTRY CO., LIMITED
|
IEC 60598 IP3X Test Probe Test Rod High Precision Inspection Probe IEC 60529 Potable Testing Probe
|
... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,...
DONGGUAN LONROY EQUIPMENT CO LTD
|
IEC 60065 2014 Test Probe For Verify The Protection Against Access With A Finger
|
... 8.4. Application: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts....
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 61032 75N Test Probe 11 Rigid Finger Probe Anti Shock Test Finger Probe 11
|
Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing......
SKYLINE INSTRUMENTS CO.,LTD
|
Stainless Steel IEC 62368 Figure V.5 Terminal Probe
|
...Test Probes IEC62368 probe no. Probe Name IEC 62368 Figure V.1 Jointed test probe for equipment likely to be accessible to children IEC62368 Figure V.2 Jointed test probe for equipment like to be accessible to children IEC62368 Figure V.3 Blunt probe, Telecom Test Probe IEC62368 Figure V.4 Wedge probe IEC62368 Figure V.5 Terminal probe I) IEC 62368 Figure V.1 Jointed test probe......
Guangzhou Shice Equipment Co., Ltd.
|