SGS 6H M2 Plasitc Threaded Inserts Good Magnetic Electrical Conductivity
|
...Plasitc Threaded Inserts With Good Magnetic And Electrical Conductivity Description In general, the screw connection between plastic parts is usually connected by self-tapping screws. The inner hole of the plastic screw column can be formed by injection molding at one time, and the subsequent self-cutting of the self-tapping screw is used to generate the threaded......
Xinxiang Flight Fasteners Co., Ltd.
|
Yellow Cable Wire Harness Magnetic Safe Cable Pvc Jacket With Overmolded Ends
|
... cables are un-coupled, the ground circuit is interrupted and the machine will not operate. The components are held to the cable by flat head screw that is screwed into a thread insert. The threaded insert is attached to one wire inside the cable as the...
Edgar Auto Harnesses LTD.
|
Low Power Consumption MSR Magnetic Card Reader With USB / RS232 Interface
|
...Magnetic Stripe Card reader / Magnetic Card Reader / Magnetic Slot Reader Model: F750 FEATURES: Read magnetic stripe all three tracks of information, Power up with diagnostics, Interface: USB or RS232, Bi-directional swiping, Good reading confirmation by beep sound, Threaded inserts......
Shenzhen Prova Tech Co., Ltd
|
Inserted Socket Threaded Magnet For Precast Stair Treads Lifting
|
Inserted Socket is made of deformed steel bars with internal thread processing, and the top is designed to penetrate the pin hole for the reinforcing bar to increase the shearing force and prevent falling off during demoulding. At the same time, the load......
Chuzhou Meiko Magnetics Co.,Ltd.
|
1106 Nickel Plated DN20 DN25 DN32 Magnetic Lockable Ball Valve Female Threaded End x PP-R pipe End
|
...: Fix the Lock cap by hand, insert the key into the lock hole to the very end, turn the key 90° clockwise to unlock the lock cap and take it out. At this status, the Key can not be pulled out from the lock ......
Yuhuan HVAC Valve Factory
|
Stainless Torx Flat Head Trilobular Thread-forming Screws for Plastics
|
304/316/18-8 Stainless Steel Torx Flat Head Trilobular Thread-forming Screws for Plasitcs Stainless steel screws have good chemical resistance and may be mildly magnetic. They are beveled under the head for use in countersunk holes. Also known as Plastite ......
Drolee International Corp. Ltd
|
DIN982 A4-80 m8 Nylon Insert Lock Nut Specifications Stainless Steel 316L
|
.... The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. Metric 316 stainless steel is also known as A4 stainless steel. Nuts may be mildly magnetic. All meet DIN 982,...
JiangYin XiangGu Hardware Products Co.,Ltd
|
DIN985 Stainless Steel Nylon-inserts Locknuts Nylon-inserts Hexagon Locknuts
|
... magnetic. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. Metric 18-8stainless steel is also known as A2 stainless steel. Products Specifications ......
Suzhou Runtai Precision Hardware Co,.Ltd.
|
Electro magnetic flow meter for industrial flow metering DN50 - DN1200, Pressure: PN16
|
...magnetic flow meter for industrial flow metering DN50 - DN1200, Pressure: PN16 Product introduction Our flowmeters cover a wide range of applications and satisfy every customer demand: flanged, wafer, threaded and insertions DN40 to DN1200 with pressure up to PN40. Electromagnetic flow metering is one of the oldest & most widely used across the industries. Magnetic......
Shanghai I Fluid Technology Co., Ltd.
|
Tungsten Cobalt-Cemented Tungsten Carbide Insert Cutting Tools Pr.China
|
Product Description We mainly provide special, professional, high-performance hard alloy: hard alloy ring for mechanical seal and pump shaft sleeve; Hard alloy for oil and natural gas wellhead installation (valve core, valve seat, anti-wear sleeve, hole ......
ZHANGJIAGANG CITY PEONY MACHINERY CO.,LTD
|
Submit your “plasitc threaded inserts for magnetic” inquiry in a minute :