EN-71-1 ASTM F963 Toys Testing Equipment Accessibility Probes For Sharp Point Test
|
...Testing Equipment ASTM Accessibility Probes Description: Accessibility Probes is used to determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: 1. Probe......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Toys Testing Equipment Alloy ASTM Toys Safety Testing Equipment Accessibility Probes
|
...Accessibility Probes, Toys Safety Testing Equipment Product information To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe......
SKYLINE INSTRUMENTS CO.,LTD
|
37° IP2X Water Ingress Protection Test Equipment Finger Probe B
|
... 12.3 Acceptance conditions The protection is satisfactory if adequate clearance is kept between the access probe and hazardous parts. For the test of first characteristic numeral 1 , the access probe 50 mm diameter shall not completely pass through...
Guangzhou HongCe Equipment Co., Ltd.
|
ASTM F963 Toys Testing Equipment Finger Probe Testing Equipment
|
...Probe Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
REFT Eddy Current Testing Equipment Inspection Probe
|
REFT Probes for eddy current Flaw Detection Good probe design and proper probe structure can enhance the defect signal which is difficult to detect and make it easy to be detected. With many years of probe production experience, careful design and strict ......
TMTeck Instrument Co., Ltd
|
Ultrasonic Thickness Gage Ultrasonic Thickness Testing Equipment Ultrasonic Probe
|
Ultrasonic Thickness Gage Ultrasonic Thickness Testing Equipment Ultrasonic Probe HIGH PRECISION ULTRASONIC THICKNESS GAUGE TG3230, ultrasonic thickness gauge, thickness tester TG-3230 is a simple to use, ......
HUATEC GROUP CORPORATION
|
EN 71-1 ODM Accessibility Probe AB Aluminum Material Anti Abrasion
|
... the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Standards: EN 71-1, 16 CFR 1500,...
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Accessibility Probes Toy Test Equipment for Fake Finger Touch Probe Testing Toys Accessibility
|
Accessibility Probes Toys Testing Instrument Fake Finger Touch Probe Testing Equipment Description: To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Applications: Accessibility probes are designed for two age groups: Probe......
Dongguan Hust Tony Instruments Co.,Ltd.
|
IEC 61851 EVSE Testing Equipment Electric Vehicle Charging Pole IPXXB Test Probe
|
...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test......
Sinuo Testing Equipment Co. , Limited
|
New Condition Ingress Protection Test Equipment IEC60529 IP Code Probes Test Probe C / D
|
...Probes Test Probe C / Test Probe D Ship by Express 1. Introduction: IP code probe is a test probe to verify the degrees of protection specified in IEC60529. Test probe C (test rod) is intended to verify the protection of persons against access to hazardous parts, it is also used to verify protection against access with a tool. Test Prod D (test wire) is intended to verify the protection of persons against access......
Pego Electronics (Yi Chun) Company Limited
|
Submit your “rustproof test equipment access probes” inquiry in a minute :