DC 12V CE Smoke Density Tester , Furniture Testing Machine 150×45×40cm
|
... and cables Test index: Optical density(OD) and specific optical density(DS) of the smoke Measuring principle: Lambert-beer Law Measuring method: Measure the smoke light transmission percent of original light transmission to represent smoke density, and...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
BS 1006 G02 Smoke Testing Chamber Smoke Laboratory Tester AATCC 23 Testing Machine
|
BS 1006 G02 Smoke Testing Chamber Smoke Laboratory Tester AATCC 23 Testing Machine Introduction The samples and the test control fabric were simultaneously exposed to the nitrogen oxide smoke produced by the gas combustion until the color change of the ......
DONGGUAN LONROY EQUIPMENT CO LTD
|
CE Smoke Density Furniture Testing Machine DC 12V 150×45×40cm
|
Smoke Density Wire Cable Smoke Density Tester Cable Tester Furniture Testing Machine Descriptions: Test the smoke density of the wires and cables Test index: Optical density(OD) and specific optical density(DS) of the smoke Measuring principle: Lambert-beer Law Measuring method: Measure the smoke light transmission percent of original light transmission to represent smoke......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
NBS Plastic Mechanical Testing Machine Smoke Density Test With ISO5659 - 1 : 19.96
|
...Testing Machine Smoke Density Test With ISO5659 - 1 : 19.96 Scope of application: 1. ZY6166D-PC plastic smoke density test box is widely used in various fields, mainly used for measuring the smoke produced by the combustion of materials and the optical density of flame and flame burning; The FTIR Fourier infrared analyzer is also used for the detection of smoke toxicity (HCN, NOX, CO, HF, HCL, SO2). 2 boxes, plastic smoke...
Dongguan HOOHA Electrical Equipment Company Limited
|
ASTM E662 Burning Smoke Density test Chamber / Materials Smoke Density Testing Machine
|
... of 1.5M from the ground and 0.5M from the wall. Monitor the temperature of the laboratory. Comply with the approved combustion test in Section 10 of GB/T17651.1-1999. Control part: 1 High-precision boards are used, and all high-quality components are...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Plastic Smoke Density Testing Machine A New Type Of Testing Equipment For Measuring Smoke Density Developed
|
...Smoke Density Testing Machine Plastic combustion smoke density tester is a new type of testing equipment for measuring smoke density developed according to the technical conditions specified in the standard GB/8323.2-2008 and ISO5659-2 "Plastic Smoke Generation Part 2 Test Method for Determining Smoke Density by Single Chamber Method", these standards are suitable for determining the specific optical density of smoke...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Cone Calorimeter Cable Testing Machine Visible Smoke Release Rates Testing
|
... and mainly for building products and electric cable testing. The analysis cabinet of our CCT Visible Smoke Release Rate Testing Machine can be moved, it can be used for cone calorimeter test, and CCT Visible Smoke Release Rate Testing Machine can also be...
Delta Technology (Chongqing) Co., Ltd.
|
Bunched Cable Vertical Flame Spread Testing Machine For Heat Release by EN 50339
|
...Testing Machine Introduction EN 50399 specifies the tester and methods of test for the assessment of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 details the test machine and the arrangement and calibration of the instrumentation to be installed in order to measure the heat release and the smoke...
Advanced Instruments Co.,Limited
|
ISO 5659-2 0-924 Six Gear Automatic Shift Plastic Smoke Density Testing Machine
|
... stipulated in the national standard GB8323.2-2008, which is suitable for measuring the specific light density of smoke produced in the combustion of plastics, and the maximum light density is the test result. It is used to assess the smoke performance of...
SKYLINE INSTRUMENTS CO.,LTD
|
ASTME84 Tunnel Furnace Lab Fire Testing Machine Fire Smoke Tripped
|
...Testing Machine Fire Smoke Tripped Specification E84 Test Equipment Overview: Scope of display Briaf description of test - Surface turning charectiristes of bulding materials in form of fire, smoke and tripping. Standard : Scope of testing ASTM E84,U/ 723 mam -Fse as FS1& This firt-test-rrsporen reuut siming for the Smoke......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
Submit your “smoke testing machine” inquiry in a minute :