For Lathe Machine SINO TFT Screen 3 Axis Digital Readout DRO Linear Scale Ruler KA300 KA500
![]() |
... set. It is recommended to put the TFT screen DRO SDS2-3VA on the electrical box of the lathe. For axis Z, use the KA-600 grating ruler; for axis X and Z1, use the KA-300 or KA-500 grating rulers. The grating rulers come with a normal 3M cable, however...
Guangzhou Sino International Trade Co.,Ltd
|
Easson 3 Axis Digital Readout For Milling Machine 20 Choices
![]() |
Keyboard Description: A: Numbers, decimal points , plus and minus keys B: Up and down selection key C: XYZ Axis display value to zero key D: confirmation key E: X Y Z axis selection key F: Clear key 1. clear key in normal calculation mode 2. cancel the ......
Zhuhai Easson Measurement Technology Ltd.
|
Ø400mm Digital Horizontal Profile Projector HB16-3015 with Digital Readout DP300
![]() |
...-in projection screen. On this screen there is typically a grid that can be rotated 360 degrees so the X-Y axis of the screen can be aligned with a straight edge of the machined part to examine or measure. This projection screen displays the profile of the...
Keasson Photoelectric Technology Co., Ltd.
|
7.0 Inch TFT Screen SPRT100 Digital Thermometers Readout
![]() |
High Accuracy NanoVolt /Micro-Ohm Meter Temperature Calibration Instruments PR291/PR293 series microhm thermometers and PR293 series nanovolt microhm thermometers are high-precision measuring instruments specially designed for temperature metrology. They......
Changsha Panran Technology Co., Ltd.
|
1.5V 2 Axis Magnetic Digital Protractor DMI
![]() |
DMI610 inclinometer digital dual axis, protractor spirit level full color screen. 2 axis digital readout ▶ GENERAL DESCRIPTION DMI610 is a digital display inclinometer for various industry angle controling and measuring. The core of this product use micro ......
Shenzhen Rion Technology Co., Ltd.
|
22 Parameters Tft Touch Screen Digital Surface Roughness Tester
![]() |
22 PARAMETERS TFT TOUCH SCREEN SURFACE ROUGHNESS TESTER SRT-6680 WITH GRAPHIC Technical Parameters: Measuring Range The Z axis (vertical) ±80μm/±160 µm(enhanced model) The X axis (Transverse) 20mm Resolution The Z axis (vertical) 0.01μm/±20μm 0.02μm/±40......
HUATEC GROUP CORPORATION
|