250v eu socket tester

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Place of Origin:China

Brand Name:KeRang

...ch occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The

Brand Name:HongCe

Model Number:HO6508

Place of Origin:China

Performance Tester For Proximity Switches With Integrally Connected Cables Pull Force 160N Torque Test 0.1Nm (360°) Product Introduction The performance tester for proximity switches with integrally connected cables is special designed and manufactured as ...

Brand Name:CHX

Model Number:CHX-DM022

Place of Origin:CHINA

Self-Recovery Fuse 200mA / 250V Electromagetic Field Tester Security Information Use this instrument with special attention, improper use may cause electric shock or damage to the instrument. In accordance with the usual safety procedures and full ...

Brand Name:CHX

Model Number:CHX-DM022

Place of Origin:CHINA

Self-Recovery Fuse 200mA / 250V Electromagetic Field Tester Security Information Use this instrument with special attention, improper use may cause electric shock or damage to the instrument. In accordance with the usual safety procedures and full ...

Place of Origin:China

Brand Name:HongCe

Measuring Gauge For Plug and Socket Product information: Some measuring gauges are designed and manufactured by Hongtong Electromechanical Co., Ltd. These measuring gauge confirm to the standard of GB2099.1-2008 clause9,GB1002-2008 and GB1003-2008 whi...

Brand Name:HongCe

Model Number:HC-EV1

Place of Origin:China

7 Inch Touch Screen Electric Vehicle Plug And Socket Life Test Machine Product information: This test machine is manufactured according to the standard requirement of IEC 62196-1, it is suitable for various types of electric vehicle plug and socket life ...

Brand Name:HongCe

Model Number:HC9917

Place of Origin:China

Apparatus For Testing Cord Retention For Flexible Cables Of IEC60884-1 Figure 20 Single Station Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 23.2, figure 20 Application: It is ...

Brand Name:Kinte

Model Number:WH-8818CD

Place of Origin:Guangdong,China (Mainland)

AC 220V Plug In Socket Tester Insert Pull Out Tester 0.01MM Fine Tuning Distance​ This machine is suitable for all kinds of connectors of the insertion force and pull-out test, with the patented design of the automatic heart device, will be fully accurate ...

Brand Name:PEGO

Model Number:PG-PL

Place of Origin:China

IEC60884-1 30A Power Load Cabinet used for Plug Socket Life Tester 1. Introduction: Power Load cabinet is a support equipment designed according to IEC60884-1 and UL1054, it is applied to simulate the electrical appliance in charged state, then to do the ...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Model Number:KP-BCL04

Place of Origin:china

Harden Steel IEC60884 Figure18 And Figure19 Verification Of Maximum Withdrawal Force Test Apparatus Application: This device complies with the requirements of IEC60884 Figure 18/19, VDE0620, etc. It is suitable for checking the maximum force required to ...

Brand Name:Pego Tester

Model Number:PG-PIT

Place of Origin:China

IEC60065 Plug - In Torque Test Apparatus Equip with BS / UL / AS / NZS Plugs 1. Introduction The plug-in torque test apparatus is designed according to IEC60065 figure 11 and IEC60950-1 clause 4.3.6, it is applied to check various elements that are ...

Brand Name:PEGO

Model Number:PG-TIS166

Place of Origin:China

TIS166-2549 plug and socket-outlet test gauges 1. Introduction The gauges are strictly designed according to TIS166-2549, in figure A.1 to A.5 are used to check dimensions of the socket-outlet and gauges in figure A.6 to A.7 are used to check pulling force...