28 db power amplifier

Brand Name:P-AMF

Model Number:XL350

Place of Origin:china

...Power Consumption 2 Channel Power Amplifier The Ultimate Amplifier for Audio Description 1, Controls and Indicators: The amplifier should have controls for adjusting volume, tone, and other parameters to fine-tune the audio performance. LED indicators or meters may be included to provide visual feedback on the power status, signal presence, and protection status of the amplifier. 2, Durability and Reliability: Look for an amplifier

Brand Name:STMicroelectronics

Model Number:LM258DT

Place of Origin:Shenzhen, China

... to 105C Package Type: SO N Packaging: Tape and Reel Pin Count: 8 Number of Elements: 2 Common Mode Rejection Ratio: 70(dB)

Brand Name:STMicroelectronics

Model Number:LM258DT

Place of Origin:Shenzhen, China

... to 105C Package Type: SO N Packaging: Tape and Reel Pin Count: 8 Number of Elements: 2 Common Mode Rejection Ratio: 70(dB)

Brand Name:SWT

Model Number:SW-PA-09601215-60C

Place of Origin:China

960 - 1215 MHz L Band Power Amplifier Psat 60dBm RF Power Amplifier for high-power telecommunications Description The 960 - 1215 MHz L Band Psat 60dBm RF Power Amplifier is a high-power amplifier designed to operate within the L-band frequency range, ...

Brand Name:P-AMF

Model Number:P3

Place of Origin:china

... are driving. The power rating of the amplifier should be sufficient to deliver the required power without distortion or clipping. If the amplifier is underpowered, it may not be able to adequately drive the load, resulting in distorted or weak sound.

Brand Name:SWT

Model Number:SW-PS-20004000-47C

Place of Origin:China

...power Drone Module 2000-4000MHz rf power amplifier module in amplifying high-frequency signals The 2000-4000 MHz RF power amplifier is a high-power device operating within a frequency range of 2000 to 4000 MHz, delivering up to 50W output power. It is widely used in wireless communications, radar systems, electronic warfare, and testing equipment, meeting the demands of wide bandwidth and high-power...

Brand Name:VBE

Model Number:VBP2GL

Place of Origin:China

...RF Low Noise Amplifier LNA , RF Power Amplifier Module Model: VBP2GL VBE RF Power Amplifier Module Instructions: VBE solutions of RF modules including radio frequency signal source,radio frequency power amplifier(PA),low noise amplifier(LNA), Radio ...

Brand Name:VBE

Model Number:VBP7-10GL

Place of Origin:China

...,radio frequency power amplifier(PA),low noise amplifier(LNA), Radio Frequency outdoor unit(ODU) and customized radio frequency module solution,the frequency band cover P-wave ...

Brand Name:SWT

Model Number:SW-PA-0000R10500-47C

Place of Origin:China

...Power Amplifier Solid State Psat 50 W RF Power Amplifier Description The 0.1-500 MHz UHF Power Amplifier is a versatile device designed to operate within the Ultra High Frequency (UHF) range, covering a wide frequency spectrum from 0.1 MHz to 500 MHz. Its key features include: Frequency Coverage: This amplifier...

Brand Name:P-AMF

Model Number:RIOR2

Place of Origin:china

...Power Amplifier 1U UPDM audio amplifier technology solutions Description UPDM (Unipolar Pulse Density Modulation) audio power amplifier, The latest generation of ultra-low-loss UPDM audio amplifier technology solutions. From 8 1100W / 5R per channel to a maximum of 6600W / support. Non-bridged multiple power specification options. New technology applications: 90V ~ 270V power...

Brand Name:P-AMF

Model Number:EV-7300

Place of Origin:china

...Power Amplifier ClassAB Description Amplification: A Class AB power amplifier amplifies audio signals from microphones and music sources, boosting their power level to drive the connected speakers effectively. It provides sufficient amplification to ensure that the audio signals are audible and clear in a karaoke environment. Class AB Operation: Class AB amplifiers...

Brand Name:ADI

Model Number:ADA4841-1

...Power Amplifier ICAudio Power Amplifier IC FEATURES Low power: 1.1 mA/amp Low wideband noise 2.1 nV/√Hz 1.4 pA/√Hz Low 1/f noise 7 nV/√Hz @ 10 Hz 13 pA/√Hz @ 10 Hz Low distortion: −105 dBc @ 100 kHz, VO = 2 V p-p High speed 80 MHz, −3 dB bandwidth (G = +1) 12 V/μs slew rate 175 ns settling time to 0.1% Low offset voltage: 0.3 mV maximum Rail-to-rail output Power down Wide supply range: 2.7 V to 12 V APPLICATIONS Low power...

Brand Name:VBE

Model Number:VBPAC-59-64M

Place of Origin:China

...Power Amplifier Ku Band 14.0GHz to 14.5GHz Frequency range high Power military level Ku Band RF Power Amplifier PA , RF Power Amplifier Module Technical Specifications of Power Amplifier: NO. Item Description Min Typical Max Unit 1 Frequency Band 14.0 14.5 GHz 2 RF Output Power...

Brand Name:VBE

Place of Origin:CHINA

...Power Amplifier Module SMA-F 28V 100g with signal source built-in, RF Jamming module Product Description: RF Power Amplifier Module is a high-performance RF power amplifier with built-in VCO, integrating a high-power module and harmonic suppression, low noise figure, compact size and low spurious suppression. It is designed for applications requiring high power output and excellent linearity. This RF Power Amplifier...

Brand Name:P-AMF

Model Number:P3

Place of Origin:china

... are driving. The power rating of the amplifier should be sufficient to deliver the required power without distortion or clipping. If the amplifier is underpowered, it may not be able to adequately drive the load, resulting in distorted or weak sound.

Brand Name:P-AMF

Model Number:H400

Place of Origin:china

... are driving. The power rating of the amplifier should be sufficient to deliver the required power without distortion or clipping. If the amplifier is underpowered, it may not be able to adequately drive the load, resulting in distorted or weak sound.

Brand Name:P-AMF

Model Number:SR50

Place of Origin:china

...Power Amplifier with 2 X 500W Output for Professional Audio Applications Description 1, Power Output: This amplifier provides a power output of 500W per channel. With two channels available, it can deliver a total power output of 1000W. This power level is suitable for driving medium-sized sound systems, including speakers for live performances, small venues, or studio monitoring. 2. Dual Channels: The amplifier...

Brand Name:P-AMF

Model Number:XL350

Place of Origin:china

...Power Amplifier 2 Channel 350W Low Static Power Consumption and Dynamic Energy Description 1,Low Static Power Consumption: The amplifier is designed to have low static power consumption. This means that even when the amplifier is idle or not actively amplifying signals, it consumes minimal power...

Brand Name:P-AMF

Model Number:H1400

Place of Origin:china

...Power Amplifier 2x1700w for Linear Array Speakers with Energy Efficiency Description 1,Class H Amplifier: A Class H amplifier incorporates multiple power supply voltage levels to optimize power efficiency. It adjusts the voltage supply based on the required output power, which helps reduce power consumption and heat dissipation. This allows the amplifier to deliver high power...

Brand Name:P-AMF

Model Number:P3

Place of Origin:china

... system you are driving. The power rating of the amplifier should be sufficient to deliver the required power without distortion or clipping. If the amplifier is underpowered, it may not be able to adequately drive the load, resulting in distorted or