appendix f flame tester

Brand Name:SKYLINE

Model Number:SL811

Place of Origin:CHINA

... Equipment Vertical Flame Tester Product Introduction Vertical Flame Tester is suitable for the measurecan be pre-setted and adjusted automatically.ment of limited flame spread properties of Protective clothing.. A defined flame from a specified burner...

Brand Name:AI

Model Number:VFT

Place of Origin:China

...Flame Tester is suitable for the measurement of limited flame spread properties of protective clothing. The flame from the burner is applied for 10 s to the surface or the bottom of textile specimens which are vertically oriented. Features: ISO 6941 Vertical Flame Tester...

Brand Name:LAB TECH

Model Number:BVC

Place of Origin:China

...Flame Tester -- Model BVC Introduction: Bunched Cable Vertical Flame Spread Tester is a series conforming to IEC 60332-3-10 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using the standard ignition source while supplying a certain amount of air to a chamber of a defined volume. Additionally, if bunched cable vertical flame spread testers

Brand Name:LAB TECH

Model Number:SIT

Place of Origin:China

...Flame Tester Introduction: SIT ISO11925 Small Flame Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. SIT ISO11925 Small Flame Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame...

Brand Name:Delta

Model Number:NFT

Place of Origin:China

.... Then according to the specimen is ignited and burned time and burning length to evaluate the fire hazard of the small flames caused by the fault condition inside the equipment. NFT Needle Flame Tester is widely used in low-voltage electrical equipment,

Brand Name:Delta

Model Number:NFT

Place of Origin:China

...Flame Tester Introduction: NFT IEC60695 Needle Flame Tester uses a Φ0.9mm needle burner, use butane as gas source, burn the specimen at 45 ° angle. Then according to the specimen is ignited and burned time and burning length to evaluate the fire hazard of the small flames caused by the fault condition inside the equipment. NFT IEC60695 Needle Flame Tester...

Brand Name:Delta

Model Number:SCV

Place of Origin:China

...wire or cable is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Features: Stainless steel box, the height of 1300mm,

Brand Name:Delta

Model Number:SCV

Place of Origin:China

...scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Features: Stainless steel box, the height of 1300mm, width of 300mm, depth of

Brand Name:HongCe

Model Number:HVF-3

Place of Origin:China

...Flame Tester for Fire Hazard Testing Standard: UL94 Test for Flammability of Plastic Materials for Parts in Devices and Appliances; IEC 60695-11-2 Fire hazard testing - Part 1 1 -2: Test f1 ames - 1 kW nominal pre-mixed flame - Apparatus , confirmatory test arrangement and guidance; IEC 60695-11-3 Fire hazard testing – Part 11-3: Test flames – 500 W flames...

Brand Name:HongCe

Model Number:HVF-3

Place of Origin:China

IEC60695-compliant 220V/50Hz Horizontal and Vertical Flame Tester with 50W and 500W Power Options This device is an IEC60695 horizontal and vertical flame tester (50W and 500W), including its applicable standards, application range, test sample ...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This tester

Brand Name:YUYANG

Model Number:YY162

Place of Origin:China

... the current advanced embedded computer control, to achieve full intelligent control. The needle flame test is to use a needle burner of the specified size (Φ0.9mm), with a specific gas (butane or propane), and the sample is fired at a 45° angle. The

Brand Name:SKYLINE

Model Number:SL-BWV01

Place of Origin:CHINA

...25:2000 Bunched Wires Vertical Flame Tester BWV Bunched Wire Vertical Flame Spread Tester is a series conforming to IEC 60332-3-10 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable...

Brand Name:Delta

Model Number:IMO

Place of Origin:China

...Flame Tester Introduction: IMO Imo Resolution Spread of Flame Tester is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 (Reaction to fire tests–Spread of flame...

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

0.5m³ Needle-Flame Tester Plc Control The New IEC60695 Flammability Test Machine Products Introduction This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess...

Brand Name:HAIDA

Model Number:HD-W821

Place of Origin:Guangdong, China (Mainland)

...Flame Tester Flammability Testing Machine For Fabric 26mm Test standard GB / T5456-2009,ISO6941 : 2003 Technical parameters Technical Index HD-W821 Control method 7-inch color touch screen, can set and display ignition time and flame spread time Machine size 410mm(W) X 900mm(H) X 380mm(D) Ignition time 0 ~ 999.9s can be set Flame spread time 0 ~ 999.9s can be set Flame angle 30 º& 90° Flame...

Brand Name:HJ

Model Number:NF-1

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Description of the test apparatus: Burner: The burner to produce the test flame shall consist of a tube at least 35 mm long with a bore of 0.5 mm ± 0.1 mm and an outer diameter not

Brand Name:PEGO GROUP

Model Number:HVR-4H

Place of Origin:China

IEC60695-11-4 50W Flammability Testing Horizontal and Vertical Flame Tester 1. Introduction The Horizontal and Vertical Flame Tester is designed according to the requirements of IEC60695-11-4, GB/T 5169.22, IEC60695-11-10, GB/T 5169.16, GB/T2408, Section ...

Brand Name:YUYANG

Model Number:YY140

Place of Origin:China

... of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is