beckhoff kl9020 e bus terminal module

Brand Name:Beckhoff

Model Number:EL9182

.... It enables Ethernet connectivity via an RJ45 plug, converting K-bus signals to RS485 for seamless data transmission. Powered through the K-bus, the module requires no additional configuration beyond connecting a 24 V supply and Ethernet cable. It forms a

Brand Name:BECKHOFF

Model Number:KL5001

Place of Origin:GERMANY

... Description Bus Terminal, 1-channel encoder interface, SSI Technical Data The KL5001 Bus Terminal is an SSI master and enables the direct connection of an absolute encoder with SSI (synchronous serial interface). Both singleturn and multiturn encoders are

Brand Name:BECKHOFF

Model Number:KL9010

Place of Origin:GERMANY

BECKHOFF KL9010 PLC End Terminal Module In Stock Description Model KL9010 Brand/Manufacturer Beckhoff DataSheet/Catalogue In PDF File Weight/Dimension 12 mm x 100 mm x 70 mm Condition Brand new Description End Terminal Module Technical Data The KL9010 bus end terminal is necessary for data exchange between the Bus Coupler and the Bus Terminals. Each assembly must be terminated at the right hand end with a KL9010 bus end terminal. The bus...

Brand Name:BECKHOFF

Model Number:BK1120

Place of Origin:Germany

BK1120 EtherCAT bus coupler for standard bus terminal modules The BK1120 EtherCAT coupler is used to connect the EtherCAT Fieldbus protocol to the bus terminal module. The coupler converts Ethernet 100BASE-TX transfer messages into a built-in, fieldbus-...

Brand Name:Beckhoff

Model Number:EL9182

Place of Origin:Germany

The KL9020 is attached to the end of the Bus Terminal block in the same way as the standard terminal KL9010 and terminates the terminal block. The KL9020 enables the connection of an Ethernet cable with a RJ45 plug. The K-bus signals are converted to RS485...

Brand Name:BECKHOFF

Model Number:KL3408

Place of Origin:Germany

BECKHOFF 8-Channel Analog Input Module KL3408 For Solar Cell Stringer 8-Channel Analog Input Module KL3408 Introduction Analog input terminal modules KL3404, KL3408, KL3464 and KL3468 are used to process signals in the range of - 10 V and + 10 V or 0 V and 10 v. The current is digitized with a resolution of 12 bits and is transmitted to the higher level automation equipment in the state of electrical isolation. In the KL3404 and KL3464 bus

Brand Name:BECKHOFF

Model Number:KL9010

Place of Origin:GERMANY

KL9010 Beckhoff IECEx Approved Beckhoff End Terminal Product Description The KL9010 bus end terminal is necessary for data exchange between the Bus Coupler and the Bus Terminals. Each assembly must be terminated at the right hand end with a KL9010 bus end ...