bga test socket

Brand Name:KRIPAL

Model Number:UKS-Bseries

Place of Origin:China

...harshest testing. In our test lab it is exposed to cold, heat, dust and water over and over again. Only the products that withstand these tests are worthy of the name KRIPAL. Our products are of course certified to national and international standards by

Brand Name:Sinuo

Model Number:SN1013C

Place of Origin:China

... is a special test instrument used to detect whether the force required to pull the plug out of the socket and the force required to insert the plug into the socket are within the specified range. It is an indispensable device for electrical accessories,

Brand Name:Sinuo

Model Number:SN2129A

Place of Origin:China

... assembly. Application: Check the mechanical strength of the charging gun cable assembly. Test principle: Use a clamp to fix the sample at a height of 1000mm from the ground and drop it to verify its mechanical strength. Usage environment: Power ...

Brand Name:Sinuo

Model Number:SNQC1006B-6500A

Place of Origin:China

... and Socket Temperature Rising Test Equipment Complied Standards & Clauses It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Equipment Overview The system uses self-programmed software controlled by a computer. All standard test ...

Brand Name:Sinuo

Model Number:SNQC1005A

Place of Origin:China

...Socket Mechanical Test Device Endurance Tester Complied Standards & Clauses Conforms to IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Product Overview The servo motor drive mechanism is used to perform linear plug-and-pull repetitive actions on the sample, and an external load can be connected for on-off testing...

Brand Name:Sinuo

Model Number:SNQC1009-3

Place of Origin:China

...Test Charging Interface Mechanical Endurance Tester Complied Standards & Clauses IEC 62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC 60309-1:2012 "Plug,socket...

Brand Name:Sinuo

Model Number:SN1106-800A

Place of Origin:China

... information: The test equipment is used to verify accessories shall be so constructed that the temperature rise in normal use is not excessive. It is used to check the temperature rise of the plugs, socket-outlets and vehicle connectors after passing the

Brand Name:Sinuo

Model Number:SN1013

Place of Origin:China

... 62196-1:2014 clause 17.2. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle connector and the minimum force required when the single-stage pin is pulled out of the socket. It is also used to

Brand Name:Sinuo

Model Number:SN2123C

Place of Origin:China

...Test Machine Standard & Clause: The Tumbling Barrel Free Fall Test Machine conforms to the standard of IEC60598-1: clause 4.13.6; IEC60884-1: clause 24.2; IEC60068-2-32; IEC60320-1clause 23.2; DIN VDE 0620-1; and BS1363-1-2012; and customer customized requirements. Application: This machine is used to perform free fall test for plugs and sockets, plug-in ballasts/transformers and power sockets

Brand Name:Sinuo

Model Number:SN2123-2

Place of Origin:China

...Test Machine For Test Performance Of Medical Beds Product Overview: 1. Standard: conform to YY9706.252-2021 clause 201.15.3.4.1, IEC60601-2-52:2009, IEC60068-2-31:2008. 2. Samples and restrictions: plugs and sockets from various countries, plug-type ballasts/transformers and socket...

Brand Name:Sinuo

Model Number:SNQC1005

Place of Origin:China

... of Test: Used to verify whether the electrical accessories, such as electric vehicle charging interfaces, industrial plugs and sockets, and couplers, can withstand mechanical, electrical, and thermal stresses during normal use without excessive wear or

Place of Origin:China

Brand Name:HongCe

Model Number:CR-1

IEC60884 Figure 20 Apparatus For Cord Retention Testing Product details: This device conforms to the standard requirement of IEC60884 figure 20. It is for testing cord retention is for check the effectiveness of the retention of the cable of the cord ...

Place of Origin:China

Brand Name:HongCe

Model Number:PI-1

... heating resistance and burning resistance of bolt and plug with insulation sleeve. It can imitate the insulated parts of which the plug-and-socket device’s safety performance may be damaged by electric heat stress. It should not be over damaged for

Place of Origin:China

Brand Name:HongCe

Model Number:IN-1

Insulation Sleeves of Plug Pins Abrasion Test Apparatus Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC884 Figure 28. It is used to test the abrasion resistance of the insulating bushing of the ...

Brand Name:HongCe

Model Number:HO6503

Place of Origin:China

IEC60320-1 Clause 18.2 Figure13 Coupler Heating Device In Hot Conditions Standard:Confirm to the IEC60320-1, clause 18.2 figure13 standard requirement. Application:It is used for testing the heat resistance of coupler in hot conditions and very hot ...

Brand Name:HongCe

Model Number:HC9902

Place of Origin:China

IEC60884 Clause 10.1 300N Plug Compression Mechanical Strength Test Equipment Product information: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2)...

Brand Name:HongCe

Model Number:CK-5

Place of Origin:China

...test card,Shortest Path Between Two Conductive Parts Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 27.1. Creepage distances, clearances and distances through sealing compound shall be not less than the values shown in table 23. Test...

Brand Name:HongCe

Model Number:HC9924

Place of Origin:China

...Test At Low Temperature Mechanical Release Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.4, clause 30.4, figure 27 and figure 42. Standard description: Clause 24.4: The specimens are subjected to an impact test...

Brand Name:HongCe

Model Number:HC9922

Place of Origin:China

..., procedure 2 of IEC 60068-2-31, the number of falls being – 1 000 if the mass of the specimen without flexible cable does not exceed 100 g, Plug Socket Tester – 500 if the mass of the specimen without flexible cable exceeds 100 g,

Brand Name:Haida

Model Number:HD-E703

Place of Origin:China

... of electronic components, metal, chemical materials, automation components, communication module, national defense industry, aerospace industry, BGA, PCB substrate, electronic chip IC, semiconductor ceramic and high polymer materials. 2. Specifications of