bioburden testing method

Brand Name:KINGPO

Model Number:ZR - 1000

Place of Origin:China

...only meets the test requirements of B.1.1 Test Method B.1.1 of Appendix B Bacterial Filtration Efficiency (BFE) Bacterial Test Method of Medical Surgical Mask Technology YY0469-2011, but also meets the requirements of the American Society for Testing and

Brand Name:ASLi

Model Number:XL-1000

Place of Origin:Guangdong,China

... laboratory light exposure test method GB/T8427-89 textile color fastness test, resistance to artificial light fastness xenon arc GB/T8430-98 textile color fastness test, resistance to artificial light fastness xenon arc GB/T1865-97 Paints,

Brand Name:ASLi

Model Number:XL-1000

Place of Origin:Guangdong,China

...Test Chamber xenon arc accelerated aging chamber Corresponding standard: GB12831-86 Vulcanized rubber artificial climate (xenon lamp) Aging Test Method GB/T1644.2-1999Plastics laboratory light exposure test method GB/T8427-89 textile color fastness test, resistance to artificial light fastness xenon arc GB/T8430-98 textile color fastness test...

Brand Name:HTI

Model Number:TX-566

Place of Origin:Guangdong,China(mainland)

...Testing Machine , Laboratory Footwear Testers Description: The shoe wear testing machine is used for wear resistanc of shoe soles and molded bottom. The test method: first press therotating wheel vertical on the sample with a certain load at a certain speed in a certain time to do the the wear test, then measure wear track length. Specification: Standard: GB/T3903.2-2008 Common wear test methods...

Brand Name:ZONSKY

Model Number:ZY6239-ZN

Place of Origin:DONGUAN CHINA

...Test Chamber (Big Board Method) 1. Scope of Application The test method for testing the flame-retardant properties of finishes coated on flammable substrates under specified conditions is also applicable to the determination of the flame-retardant time of finishes coatings. 2. Standards GB/T12441-2005 (Appendix A). 3. Main parameters A) Test...

Brand Name:LIB

Model Number:UV-260

Place of Origin:China

... Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings ● ASTM D4799 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV and Condensation Method) ●

Brand Name:WINTEAM

Model Number:py330c

Place of Origin:CHINA

... tubes (such as infusion sets and infusion sets) that are inaccessible and that the flow path is marked as sterile. In this sterility test method, the product is washed with liquid D, the eluate is subjected to membrane filtration, and then transferred to

Brand Name:kingpo

Model Number:KP-5068-B

Place of Origin:china

Battery Nail Penetrating Tester(hydraulic) Test Methods Test under the temperature of 20℃±5℃.Put a battery along with a thermocouple(Fix its contact point on battery’s large surface) in fume hood.Use a steel pin without erosion and rust,2-8mm in diameter...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I25

... for protection test on the lamps of household appliances. Test method: Using a sphere probe whose diameter is 75±0.5㎜ to touch the lamp which is equipped with a lampshade with inconspicuous force. The sphere probe should not be able to touch the ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I34

... Pin Electric Safety Testing Probes Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the angle bet...

Brand Name:HongCe

Model Number:HC-IWS01

Place of Origin:China

Ice Water Shock Submersion Test Equipment Standard The Ice Water Shock Submersion Test Equipment is designed and produced as the standard of the ISO 16750-4:2010 5.4.3. Test method Connect the DUT to the test equipment. Operate the DUT in a hot air oven ...

Brand Name:HongCe

Model Number:HDX1304

Place of Origin:China

... insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. It is used for checking the wear resistance test of the completed flexible cables. Technical Parameters: Power supply AC230V 50Hz Fixed shaft diameter Φ40±0.3mm Test

Brand Name:HongCe

Model Number:HDX1303

Place of Origin:China

...Testing Equipment Static Flexibility Tester Clamp Height 1.5m At Least Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Cable Testing Equipment Application:It is used for checking mechanical strength of completed flexible cables. This test

Brand Name:HongCe

Model Number:HT-I34

Place of Origin:China

... Pin Electric Safety Testing Probes Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the angle bet...

Brand Name:BOTO

Place of Origin:China

...Testing Equipment test chamber iso Product Description Salt Spray fog Corrosion Testing Equipment test chamber iso9227 Application : Salt Spray fog Corrosion Testing Equipment test chamber iso9227 Salt Spray Corrosion Testing Equipment, Salt Fog Chamber is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surface coatings. Usually, the materials to be tested...

Brand Name:HeJin

Model Number:NF-2

Place of Origin:China

..., confirmatory test arrangement and guidance. Application: The test is performed to determine that, under defined conditions, the test flame does not cause ignition of parts, or that a combustible part ignited by the test flame has a limited duration of

Brand Name:HeJin

Model Number:AM0008

Place of Origin:China

...Testing Machine Auto Parts Test Equipment 0 ~ 250mm Product Description: Test trip: 100cpm Test speed: 99cpm Scope of application: Alternating load durability testing machine Type: Alternating load durability testing machine Auto Parts Test Equipment Standard: GB15083-2004 Strength Requirement and Test Method of Automobile Seats, Their Anchorages and Any Head Restraintsand Auto Parts Test...

Brand Name:Salt spray corrosion test chamber

Model Number:B-SST-120

Place of Origin:China

...Test Chamber: Anti-corrosion Testing Instrument Salt Spray Test Chamber is a high-precision salt spray testing equipment for anti-corrosion testing. It is suitable for ASTM B117 test method to evaluate the corrosion resistance of the surface of various materials. Its test area is between 0.09m2 to 2.25m2. It is featured with overload/ overheating/ leakage protection and PLC/PC control system. The Salt Spray Test

Brand Name:Salt spray corrosion test chamber

Model Number:B-SST-120

Place of Origin:China

...Test Chamber: Anti-corrosion Testing Instrument Salt Spray Test Chamber is a high-precision salt spray testing equipment for anti-corrosion testing. It is suitable for ASTM B117 test method to evaluate the corrosion resistance of the surface of various materials. Its test area is between 0.09m2 to 2.25m2. It is featured with overload/ overheating/ leakage protection and PLC/PC control system. The Salt Spray Test

Brand Name:Salt spray corrosion test chamber

Model Number:B-SST-120

Place of Origin:China

...Test Chamber: Anti-corrosion Testing Instrument Salt Spray Test Chamber is a high-precision salt spray testing equipment for anti-corrosion testing. It is suitable for ASTM B117 test method to evaluate the corrosion resistance of the surface of various materials. Its test area is between 0.09m2 to 2.25m2. It is featured with overload/ overheating/ leakage protection and PLC/PC control system. The Salt Spray Test