building material oxygen index tester

Brand Name:LB

Model Number:LOI-A

Place of Origin:China

... know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to

Brand Name:JINHAIHU

Model Number:XNR-400AC

Place of Origin:BEIJING, CHINA

...Index Tester for Plastic Materials with Dual Temperature Control and Automatic Cutting Control for Plastic Materials Application: Melt Flow Index Tester for Plastic Materials with Dual Temperature Control and Automatic Cutting Control for Plastic Materials can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials...

Brand Name:YUYANG

Model Number:YY509

Place of Origin:China

... test and can pass the building materials of the flammability test materials are classified as flame retardant sex building materials. Standards: GB/T 8625 Test method of difficult-flammability for building materials DIN 4102-15 Specifications: 1. Burner:

Brand Name:SKYLINE

Place of Origin:China

...building materials. Standard: ISO5660-1:2002 Technical Parameters Power supply voltage AC220V AC 50Hz Maximum operating power ≥5KW Cone heater power ≤5KW Heat output heat 0~120KW/m2 The maximum placement of the sample box 100mm × 100mm × 50mm Exhaust flow rate 0.012m3/s~0.035 m3/s (adjustable) Timing value resolution 1s error <1s/n Oxygen analysis paramagnetic oxygen

Brand Name:JINHAIHU

Model Number:XNR-400C

Place of Origin:BEIJING, CHINA

High-Performance Melt Flow Index Tester for Plastic Materials with Dual Temperature Control and Automatic Cutting Control Summary: The High-Performance Melt Flow Index Tester for Plastic Materials with Dual Temperature Control and Automatic Cutting Control...

Brand Name:SKYLINE

Model Number:SL-FL50

Place of Origin:China

.... This equipment’s the oxygen analyser is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. TI (Temperature Index Tester) measures temperature index of specimen by heated mixing gases on temperature up to

Brand Name:JHH

Model Number:XNR-400D

Place of Origin:Beijing, China

..., ASTM1238, JIS. The requirements of other standards can be used for polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylate, polyoxymethylene, fluoroplastic materials,

Brand Name:Delta

Model Number:BS476-6

Place of Origin:China

..., primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-4

Place of Origin:CHINA

...performance standards, room corner combustion tester control platform to provide independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, CO2/CO measuring instrument,

Brand Name:PEGO

Model Number:PG-TI

Place of Origin:China

...Index Tester 1. Introduction of Tracking Index Tester The tracking index tester is designed according to IEC60112, UL746A, GB.T4207, gb4706.1 and TMD 3628-92. It is applied to evaluate the leakage resistance (CTI and PTI) of the surface of insulating material. Tracking index tester...

Brand Name:SKYLINE

Model Number:SL818

Place of Origin:China

Building Materials Smoke Density Tester for Assessment of Density of Smoke Product Introduction ASTM D2842 Specifies the apparatus and methods of test for the assessment of density of smoke from the burning or decomposition of plastics. Smoke density tester...

Brand Name:YUYANG

Model Number:YY428

Place of Origin:China

...Index Tester for Building Materials and Structures Introduction: BS 476-6 is a test method of measuring the flame propagation properties of materials, primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index...

Brand Name:YUYANG

Model Number:YYC006

Place of Origin:CHINA

...Index Tester For Building Materials And Structures Descriptions: BS 476-6 is a test method of measuring the flame propagation properties of materials, primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index...

Brand Name:SKYLINE

Place of Origin:China

...Introduction The radiation propagation tester is used to measure the fire propagation performance of materials. The sample is exposed to a specific flame radiation source at 30 degrees, and the flame spread index Is is calculated by measuring the ...

Brand Name:YUYANG

Model Number:YY504

Place of Origin:China

...Building Material Fire Tester / Micro-computer Non-Combustibility Tester Application: Suitable for determining whether the building materials flammability test under specified conditions. Standards: EN ISO 1182 Reaction to fire tests for building products -- Non-combustibility test GB/T 5464 Test Methods for building materials non-combustibility BS 476-4 Fire tests on building materials...

Brand Name:JHH

Model Number:XNR-400D

Place of Origin:Beijing, China

High-Temperature Melt Flow Index Tester with Electronic Loading for Plastic Material Flow Rate Measurement Summary: Melt Flow Rate Instrument is used for determination of flow properties of thermoplastic high polymer under high temperature according to ...

Brand Name:YUYANG

Model Number:YYC007

Place of Origin:CHINA

Propagation Index Tester Building Materials And Structures Furniture Testing Machine Descriptions: Applicable to the British building materials and high iron flame retardant test standard, conform to the standards for BS 476-7, the method of the test to ...

Brand Name:YUYANG

Model Number:YY702

Place of Origin:China

...measuring the somke-producing characteristic of building material under controlled condition of combustion or decomposition, and also can be used for other plastics. Standards: ASTM D 2843,DIN 4102,GB/T 8627 Specification: 1. Gas ...

Brand Name:DAXIAN

Model Number:DX8424

Place of Origin:China

... materials, including the total calorific value and the net calorific value, in the constant heat capacity oxygen bomb calorimeter. Standard: GB/T14402-2007: Determination of Combustion performance of Building Materials and products-determination of

Brand Name:JINHAIHU

Model Number:XNR-400C

Place of Origin:BEIJING, CHINA

XNR-400C plastic material melt flow index mfi testing machine/ Mfi tester Application: XNR-400C plastic material melt flow index mfi testing machine/ Mfi tester is accordance to ISO1133;GB3682 2000,ASTM D1238. It's suitable to measure melt flow character...