bundle combustion testing machine

Brand Name:Great Win

Model Number:GW-026A

Place of Origin:CHINA

... with a certain load required to calculate the maximum static slide coefficient of samples, to determine the soles slide properties of the material, the equipment can test the finished shoes, the sole and only test specimens. Can do dry, wet, and the

Brand Name:Great Win

Model Number:GW-071

Place of Origin:CHINA

...shoes (boots) of the seal. During the test, the test piece is sealed with a local pressure fixture, and the test piece is brought into the water with the specified depth by the fixture. At the same time, the test piece is filled with constant pressure air,

Brand Name:Great Win

Model Number:GW-031A

Place of Origin:China

... types of shoe materials, particularly those made of fabric.It also can test safety glove with sandpaper. The specimens are capably tested for 4pcs per time and are rubbed over the abrasive in all directions in a complex, repetitive pattern and, at the

Brand Name:HUST Tony

Model Number:TNJ-002

Place of Origin:Guangdong,China(Mainland)

...used for testing the mechanical properties of tables , desks ,beds. Can perform the horizontal static load ,vertical static load, impact test and durability test. TNJ-002 General Purpose Tester for tables adopts PLC controller to control the motion of the

Brand Name:HUST Tony

Model Number:TC-004

Place of Origin:Guangdong,China(Mainland)

... dynamic durability test specification produced. The test methods are: the home model infant car Taichung, the turntable in the test stage, to adjust the conveyor speed of 1.4 ± 0.1m/sec (5kw / h ± 3.6 kw / h) The. After 64 hours of continuous testing,

Place of Origin:CHINA

... of circular cross-section to undergo plastic deformation in bending. It is intended for tubes with an outside diameter no greater than 51mm. Bend the unfilled test piece of the tube on this machine, ensuring contact between the tube and

Place of Origin:CHINA

... of circular cross-section to undergo plastic deformation in bending. It is intended for tubes with an outside diameter no greater than 51mm. Bend the unfilled test piece of the tube on this machine, ensuring contact between the tube and

Brand Name:Lixian

Model Number:HZ-7026

Place of Origin:China

Rubber Testing Machine Rubber Hose Friction Tester ISO6945:1991 Equipment Overview HZ-7026 Rubber hose friction tester is mainly used for rubber hose hose outer cover of abrasion resistance test. Standard GB/T 12721-2007,ISO6945:1991 Applicable Industry ...

Brand Name:lixian

Model Number:HZ-1003A

Place of Origin:China

ASTM Universal Testing Machine Computer Servo Type 800mm Effective Tensile Stroke Equipment summary: It is taken account of modern industrial design and ergonomics in modeling and coating. It can be tested all the materials in stretch, compression, bending...

Brand Name:HTI

Model Number:TNJ-001

Place of Origin:Guangdong,China(Mainland)

....9 and QB/T2280 related furniture standards.It Is Office furniture and indoor and outdoor furniture including integrated testing machine,It can adjust the position and angle of the frame, cylinder per your request. According to a test for the selection of

Brand Name:HTI

Model Number:TNJ-020

Place of Origin:Guangdong,China(Mainland)

... testing machine is used for evaluating rotary function of office chair under loading condition.Chair Swivel Testing Machine meets the national standard and BIFMA standard.also can be adjusted according to customer’s requirement. Applicability: This

Brand Name:Great Win

Model Number:GW-009C

Place of Origin:CHINA

...Testing Machine/ Shoes Forepart Tester(GW-009C) •Brief introduction: This machine is used for bending resistance test for finished shoes. Shoes and soles is twisted as a certain angle during a certain time, observe the shoes and sole damage, or check the crack location and degree, so as to improve quality. The machine can set test times and stop working at the set value. •Technical Specifications: Model GW-009C Shoe flexing testing

Brand Name:Great Win

Model Number:GW-099

Place of Origin:CHINA

...Testing Machine , Durability Testing Machine AC220V •Brief introduction: This tester is use to determine the protective capability of the safety glove against cutting.But,it is not available for safety glove made by hard material.A driving rotation found blade under a specified load cuts the glove held by the fixture of tester to and fro. After test...

Brand Name:Great Win

Model Number:GW-011A

Place of Origin:China

... as a materials testing machine , is applicable to testing tensile stress , compressive stress , shearing force , peeling force , and elongation of materials , components , and finished product for metal , plastic , ...

Brand Name:Great Win

Model Number:GW-010B

Place of Origin:CHINA

Computer digital Universal Compression Strength Teste/Tensile testing machine(GW-010B) •Brief introduction: This machine is used to test tension, compression, bend, shearing force, adhesion, peeling force, tear strength, etc. of specimen, semi-product...

Brand Name:Great Win

Model Number:GW-031B

Place of Origin:CHINA

... testing machine/crock testing machine(GW-031B) •Brief introduction: This machine is testing the abrasion resistance of upper, lining, socking, and similar types of shoe materials, particularly those made of fabric. The specimens are capably tested for ...

Brand Name:Great Win

Model Number:GW-054

Place of Origin:CHINA

...times, the test piece is cut into 75X20mm, and then the test piece is pressed by the weight of the roller itself to make it evenly fit, and then another Purchased tensile testing machine to determine adhesion and bond strength. •Technical Specifications:

Brand Name:TXH

Model Number:219-580

Place of Origin:China

1000 Ton Hydrostatic Machine for Testing Steel Pipes/ hydraulic testing machine Specification Hydrostatic testing machine for spiral welded pipe is mainly used to have a pressure test on spiral welded pipe or straight seam welded pipe. This hydrostatic ...

Brand Name:Great Win

Model Number:GW-099

Place of Origin:CHINA

... for safety glove made by hard material.A driving rotation found blade under a specified load cuts the glove held by the fixture of tester to and fro. After test ,compare it with its original statuses to get

Brand Name:HTI

Model Number:HTX-052

Place of Origin:Guangdong,China(mainland)

...Testing Machine Leather Test Instrument Detailed Descriptions: This machine is used to test the upper vamp and shoes materials including leather and lining, water vapor penetration resistance, under the specified 20°C and 65% RH environment. Specifications: Testing environment: Temperature 20° C, humidity: 65% RH Bottleneck Diameter About ø 30 mm Rotating speed of testing...