cable bundle testing equipment

Brand Name:HongCe

Model Number:HDX1303

Place of Origin:China

...Cable Testing Equipment Product Introduction with Cable Testing Equipment: Static flexure testing machine HDX1303 Comply with standards: IEC60245-1, IEC60245-2. Purpose: used for mechanical strength testing of finished flexible cables. This test is not applicable to cables...

Brand Name:HongCe

Model Number:HDX1301

Place of Origin:China

... resistance of various power cables and electrical conductors. Below is a table outlining its key parameters: Parameter Description Test Object Cable Conductor Test Type Resistance Measurement Test Sample 1mm² ~ 630mm² Conductor (Single or Multi-strand)

Model Number:HDX1310

Place of Origin:China

Brand Name:HongCe

... solution designed for evaluating the thermal deformation resistance of cable insulation and sheath materials under specified pressure conditions. Manufactured by HongCe, this professional Cable Testing Equipment is widely used by cable manufacturers,

Brand Name:DAXIAN

Model Number:DX8371

Place of Origin:China

... can be used to test the ability of the vertical flame propagation to be restrained under the standard conditions of the vertically installed bundles of wire, cable or optical fiber cable. Standards: - BS 476-4 - EN IS01182 - GB/T 5464 - ASTM E136[3]

Brand Name:DAXIAN

Model Number:DX8371

Place of Origin:China

... can be used to test the ability of the vertical flame propagation to be restrained under the standard conditions of the vertically installed bundles of wire, cable or optical fiber cable. Standards: - BS 476-4 - EN IS01182 - GB/T 5464 - ASTM E136[3]

Brand Name:HongCe

Model Number:HDX1308

Place of Origin:China

... and optical cables-part 1-4: Methods for general application-Test at low temperature. Application:It is used to test at low temperature for insulating and sheathing materials of electric cables. Test sample:Rubber, insulating and sheathing materials of

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

...Cable Testing Equipment For Low Temperature Bending Test Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. Application:This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. Test

Brand Name:Kingpo

Model Number:JB-4051

Place of Origin:China

Cable Testing Equipment For Cord Winding Crack Test In Low Temperature Quick Details Alternative name Cord winding crack tester Function Cable flexibility and rolling durability in low temperature Feature Electric drive Weight 135kg Volume 86×43×80cm Test standard TAPPI-T803,JIS-P8134,GB2679-7 Description: The tester is used for winding cable in low temperature and check whether the surface cracks or cracking degree. The test...

Brand Name:YUYANG

Model Number:YYW002

Place of Origin:China

...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test...

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to

Place of Origin:CHINA

Brand Name:Gold

Model Number:GD-IEC60332-3-10

Bundled Cable Vertical Combustion Test Machine Procuct Introduce The IEC 60332-3-10 bunched wire and cable combustion tester is a professional equipment that complies with international standards and is used to evaluate the flame spread performance of vertically installed bunched cables under fire conditions. The tester adopts a 1 m × 2 m × 4 m stainless steel testing room, equipped...

Brand Name:HongCe

Model Number:HDX1316

Place of Origin:China

...h 60 000 bending cycles, i.e. 120 000 single strokes, interruption of the current shall not occur. Cable Testing Equipment After the test, the sample shall withstand the voltage test carried out in accordance with 2.2 of IEC 60227-2, the voltage, however,

Brand Name:HongCe

Model Number:DW-1

Place of Origin:China

...test chamber Accurate simulation - 70℃ to 150℃ environment Professional cable testing equipment Product Introduction: The safe operation of each cable has its "stress resistance" to extreme environments. The DW-1 low temperature test chamber, as the source factory direct supply equipment we have devoted ourselves to research and development, is specially designed for cable testing...

Brand Name:YUYANG

Model Number:YY611

Place of Origin:China

...Cable Flame Testing Equipment 0-160kPa​ Descriptions: UL1581 Wire and Cable Flame Test Chamber is used to test the flame retardant performance of insulation layer under abnormal conditions such as overheat and overcurrent.This sect will be manufactured strictly according to UL1581 sect 1080.1~1080.14 and approved by Guangzhou MEIhua UL Co., LTD., which fully meets the VW-1 Flame Test...

Brand Name:Kingpo

Place of Origin:China

... oil bath Function Test capability of cables under high constant temperature Feature Electric drive Weight 87kg Volume 500*400*400(MM) Test standard JIS-C-3005 Equipment Description The constant temperature oil bath is used for testing properties of

Brand Name:Gaoxin

Model Number:GX-4010

Place of Origin:China

...Cable Testing Equipment Silver Color 1.Quick Details: Alternative name Cable abrasion tester Function Test abrasion resistance of cables and wires Feature Electric drive Weight 110kg Volume 65×44×91cm Test standard JIS-C-3005 2.Equipment Description: The wire abrasion tester is used for testing abrasion resistance of cables and wires. 3.Test method: Fix cable...

Brand Name:Gaoxin

Model Number:GX-4010

Place of Origin:China

...Cable Testing Equipment Silver Color 1.Quick Details: Alternative name Cable abrasion tester Function Test abrasion resistance of cables and wires Feature Electric drive Weight 110kg Volume 65×44×91cm Test standard JIS-C-3005 2.Equipment Description: The wire abrasion tester is used for testing abrasion resistance of cables and wires. 3.Test method: Fix cable...

Model Number:KP-7720

Brand Name:Kingpo

Place of Origin:China

....2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2and cables having more than 18 cores laid up in more than

Brand Name:HongCe

Model Number:HC9920

Place of Origin:China

...Cable Testing Equipment Product introduction: HC9920 Power Cord Bending Machine Load Box is a professional Cable Testing Equipment carefully developed by the source manufacturer. The input voltage of the equipment is AC220V±5%, 60Hz, the output current is 0~40A and can be adjusted arbitrarily, the output voltage is 0~280V, and it is equipped with 6 testing stations, which can test...

Brand Name:HongCe

Model Number:HDX1302

Place of Origin:China

.../750 V-Part 1: General requirements clause 5.6.3.1, IEC60245-2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods clause 3.1 Figure 1, IEC60065-1 clause 16.3 b) Standard description: This test shall be carried out by