chisel bit for hammer drill

Brand Name:BMR TOOLS

Model Number:carbide tip drill bit

Place of Origin:P.R.China

Carbide Tip Drill Bit Electric Hammer Drill Bit for Stone/Concrete Drilling Size 6mm-38mm Tips "-"tips Shank Type SDS Plus Shank Material 40Cr Hardness HRC65 Usage For Stone Drilling Spcification of Electric Hammer Drill Bit Code D(mm) L1(mm) L(mm) Code D(...

Brand Name:ROSCHEN

Model Number:3.5",4",5",6",8",10",12" dth hammer and bits

Place of Origin:CHINA

...Hammer with 115mm diameters bits for Down The Hole Hammer Drilling We can supply all series of drilling equipment and drilling tools suitable for Atlas Copco DTH Hammer, Atlas Copco DTH Hammer,etc. By using high-quality raw materials, utilizing advanced craft technologies and imposing strict quality inspection, the product range covers: Down the hole hammer and bits(dth hammers and dth bits),drill pipes, threaded drilling bits...

Brand Name:MIROC by KSQ

Model Number:B14115-T45-B

Place of Origin:China (Mainland)

..., construction, oil exploring etc.We offer high quality productive tools and services for all Top hammer drilling applications. Thread button bits could be with Rope thread R22, R25, R28, R32, R35, R38 and T thread, T38, T45, T51, T60, ST58, ST68 etc.

Brand Name:ROSCHEN

Model Number:T51-89mm, T51-102mm, T51-127mm

Place of Origin:CHINA

..., R35, R38, T38, T45, T51, ST58, GT60,GT68 Button bit face design: Flat face, drop centre, uniface Skirt: Normal and Retrac, straightrac. Tungsten carbide (Buttons): Spherical, ...

Brand Name:MIROC

Model Number:RC Hammer Bits

Place of Origin:Shangdong,China

...Hammer DTH Drill Bits / RE545 Hammer Bits In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. DTH bits are paired with their corresponding hammers (by drilling...

Brand Name:MING

Model Number:BIT130mm-CIR130

Place of Origin:CHINA

... bit description: KINGDRILLING hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rocks types. In conjunction with DTH hammers, drill hammer bits are designed with a spline drive for rotating the bit in the ground.

Brand Name:SOLLROC

Model Number:R38 Button bit

Place of Origin:China

... made in China, we produce all threaded button bits by hot press technology. A comprehensive range of various button bits shown as below: Thread sizes: R25, R28, R32, R35, R38, T38, T45, T51, ST58, ST60, GT60; Head ...

Brand Name:MIROC

Model Number:Tapered Button Bits

Place of Origin:ShanDong, China(Mainland)

...Bits Small Rock Drill Bits Tapered Rock Drill Bits we have three types: taper chisel bit, taper cross bit and taper button bit. It's suitable for H22mm and H25mm taper rock drill rods use. It have three taper degree: 7°, 11°, 12°. It's widely used for hard rock(f=8~18) drilling use. Taper button bits is the best sales product. Taper Chisel Bits...

Brand Name:MIROC

Model Number:Integral Rod with Chisel Bit

Place of Origin:China

Chisel Bit Integral Drill Rod Steel rock mining tools efficiency Name: Integral Drill Rod Brand:MIROC Original: China The Hex22 Integral drills steels, Hex22 x 108 mm shank, are the most common type within the Dimensional Stone Quarrying Industry. Main Features Shank: Hex22x108mm Length: 400mm-8000mm Chisel bit diameter: 26mm-41mm Integral Steel Rod is used by a hand held drill machine in Underground mining and for small hole drilling...

Brand Name:MIROC

Model Number:Integral Rod with Chisel Bit

Place of Origin:China

... within the Dimensional Stone Quarrying Industry. Main Features Shank: Hex22x108mm Length: 400mm-8000mm Chisel bit diameter: 26mm-41mm Integral Steel Rod is used by a hand held drill machine in Underground mining and for small hole drilling, equipped with

Brand Name:Mirco

Model Number:Integral drill rod

Place of Origin:China

...Drill Rod With Chisel Bit Head For Quarrying Product Introduction: Integral drill rods are ideal in small hole drilling, all integral drill rods consist of hex. rods with integrated cemented carbide chisel-shaped bit heads. With the same steels as and the best carbides made in China, we are supplying different lengths of integral drill...

Brand Name:MING

Model Number:BIT165mm-CIR150

Place of Origin:CHINA

...Drill Button Bits For Rock Drilling Product category: DTH drill tools Matched hammer: Hammer CIR150 Diameter: 165mm KINGDRILLING DTH button bit description: KINGDRILLING hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rocks types. In conjunction with DTH hammers, drill hammer bits are designed with a spline drive for rotating the bit in the ground. Drill

Brand Name:SOLLROC

Model Number:T38 T45 T51 T60 T58

Place of Origin:China

...Drill Button Bits for Top Hammer Drilling Product Specification: Thread Button Bits Product Name: Thread Button bits Description: Thread Button bits Button bit Made with high quality of best quality alloy steel bar and tungsten carbide, through heat treatment like Atlas. Material: Alloy steel bar and tungsten carbide bit...

Brand Name:New Diamond

Model Number:Mining Top Hammer Drill Bits

Place of Origin:Hunan, China (Mainland)

...Hammer Drill Bits Quarrying and Ore Mining and Well Drilling Description Iron ore, gold, coal mining, geological prospecting, tunneling, transport of water and electricity construction, quarrying, etc.suitable for the condition of rock drill, drilling complex strata with high resistance ability. Top Hammer Drill Bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling

Brand Name:APIE

Model Number:AP47

Place of Origin:China

...chisel used for piling drilling tools Main feature We offers a complete range of bullet teeth for Pile Piling and Foundation Drilling Foundation drilling tools,Rotary Drilling bits.Round shank chisel are used as ripping teeth on augers, drilling buckets and coring barrels. The range comprises several types for different areas of application. Product parameters Name Bullet teeth/Round shank chisel/Rock bits

Brand Name:MIROC

Model Number:DHD350 152mm

Place of Origin:CHIAN

...Hammer Drilling Dth Drill Bit High pressure DHD350 hammer bit Description: In DTH drilling, drill rods and bits are the most important parts of the drilling process. When working, the drill rods transmit the necessary feed force and rotation to hammer and bit plus compressed air or fluids for the hammer and flushing of cuttings, the hammer is located between the drill rod and bit. As the hole gets deeper, the length of drill...

Brand Name:SOLLROC

Place of Origin:China

Model Number:QL60 Dth Hammer Bits

...Hammer Drill Bits For Water Well Drilling About us: We are a leading manufacturer of rock drilling tools, like DTH hammers and bits, DTH drill pipes, RC hammers and bits,top hammer button bits, coupling, cross bits, drill rods located in Changsha, Hunan, China.We have rich experience in this field of DTH hammers and bits...

Brand Name:HANYUN

Model Number:HYQG100

Place of Origin:China

Breaker Chisel Hardended Precision Steel Drill Rod Excavator Volvo (1) Main Technical Parameters on hydraulic breaker chisel Excavator Model Diameter(mm) Length (MM) Weight (KGS) Applicable excavator (T) VOLVO EC120/140 100 1000 50 13-15 VOLVO EC140B/150 ...

Brand Name:MING

Model Number:BIT130mm-PS110

Place of Origin:CHINA

...Drill Button Russian Spline Bits For Mining Drilling Product category: DTH drill tools Matched hammer: Hammer russian spline Diameter: 130mm KINGDRILLING DTH button bit description: KINGDRILLING hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rocks types. In conjunction with DTH hammers, drill hammer bits...

Brand Name:MING

Model Number:BIT200mm-CIR170

Place of Origin:CHINA

... bit description: A variety of rock types can be drilled through using KINGDRILLING hammer bits in conjunction with down-the-hole hammers. Drill hammer bits include a spline drive to allow the bit to rotate in the ground when used with DTH hammers. For