crgo lamination core

Brand Name:STT

Model Number:ZZ400

Place of Origin:China

... silicon steel sheet to make core legs for transformer iron core. This kind of transformer core cutting machine can be used to cut the iron core sheet with maximum width 400mm and can cut different shapes of the core legs, such as equilateral core leg,

Brand Name:CENTERSKY

Model Number:EI 152.4, EI 180, EI 192, EI 240, EI 300

Place of Origin:Jiangyin, Jiangsu, China

...silicon steel sheet iron core EI20-60 perforated silicon steel sheet 0.5mm transformer accessories. The model of EI lamination in standard sizes is from EI-30 to EI-360.The gap sizes of transformer lamination core can be customized. Catalogue: Type a b ...

Brand Name:CENTERSKY OR NO LOGO

Model Number:EI 75, EI 96, EI 114. EI 126, EI 133.2, EI 152.4, EI 162, EI 168, EI 180, EI 192

Place of Origin:Jiangyin, Jiangsu, China

... from each other by a very thin coating of insulating varnish or by the use of an oxide layer on the surface. Introduction: Single phase EI core is made by the silicon steel strip. The model of EI lamination in standard sizes is from EI-30 to EI-360.The

Brand Name:CENTERSKY

Model Number:3PEI 20---3PEI 120

Place of Origin:JIANGYIN

The efficiency of a simple transformer construction can be improved by bringing the two windings within close contact with each other thereby improving the magnetic coupling. Increasing and concentrating the magnetic circuit around the coils may improve...

Brand Name:CENTERSKY or NO LOGO

Model Number:EI 96, EI 114, EI 126, EI 133.2, EI 150, EI 152.4, EI 180,

Place of Origin:Jiangyin, Jiangsu, China

EI 192 CRNGO Single Phase Ei Transformer Iron Core Transformers are used to change AC voltage levels, such transformers being termed step-up or step-down type to increase or decrease voltage level, respectively. Transformers can also be used to provide ...

Place of Origin:JiangSu,China

Brand Name:HengTong

Model Number:Customer settings

China Best Customized Transformer 50W800 silicon steel EI core EI-180 Cold-rolled non-oriented silicon steel sheets are hot rolled steel slabs or continuous cast slabs into coils with a thickness of about 2.3 mm. When manufacturing low-silicon products, ...

Brand Name:CENTERSKY or NO LOGO

Model Number:EI 41, EI 48, EI 57, EI 66, EI 75, EI 78, EI 85.8, EI 96

Place of Origin:Jiangyin, Jiangsu, China

...from EI-30 to EI-360.The gap sizes of transformer lamination core can be customized. EI Lamination & Wound Core Transformers : The EI Lamination and Wound Core Transformers are suitably utilized for regulating voltage supply consistently in electronic and

Brand Name:CENTERSKY or NO LOGO

Model Number:EI 240, EI 270, EI 300, EI 360

Place of Origin:Jiangyin, Jiangsu, China

...Laminated Core Transformer EI Lamination Introduction: Single phase EI core is made by the silicon steel strip. The model of EI lamination in standard sizes is from EI-30 to EI-360.The gap sizes of transformer lamination core can be customized. Leveraging over the skills of our qualified team of professionals, we are involved in providing standard quality assortment of EI Transformer Laminations. Our EI Transformer Lamination

Brand Name:CENTERSKY or NO LOGO

Model Number:3UI150, 3UI180, 3UI210, 3UI240, 3UI300

Place of Origin:Jiangyin, Jiangsu, China

... EI sheets are divided in to waste-free and low-waste types. For waste-free lamination cores, the measurements for the E sheet's winding spaces correspond to the measurements for the associated I sheet. EI lamination cores can be processed manually or

Brand Name:CENTERSKY

Model Number:UI 20, UI 30, UI 40, UI 50, UI 60

Place of Origin:JIANGYIN

...lamination Core is made by the silicon steel strip.The hole size is from Φ8 to Φ14, And the model of UI lamination is from UI-30 to UI-100. The gap sizes of transformer lamination core can be customized. Introduction: Single phase UI core is made by the silicon steel strip. The model of UI lamination in standard sizes is from EI-20 to UI-360.The gap sizes of transformer lamination core...

Brand Name:CENTERSKY or Designed Accoeding to customers' demand

Model Number:EI 35, EI 41, EI 48, EI 66, EI 75, EI 85.8

Place of Origin:Jiangyin, Jiangsu, China

...Lamination EI 96 Silicon Steel Lamination Core Three-phase EI lamination is made by the silicon steel strip, the model of three-phase EI lamination is from three-phase(20)to three phase (100), and the hole size is from φ4.5 to φ14, the gap sizes of transformer lamination core can be customized. Introduction: Single phase EI core is made by the silicon steel strip. The model of EI lamination...

Brand Name:CENTERSKY

Model Number:EI 41, EI 48, EI 57, EI 66, EI 75, EI 78, EI 85.8, EI 96

Place of Origin:Jiangyin, Jiangsu, China

...winding window area and I lamination are to be placed along the leg ends of the E lamination. Since EI cores have two open coil sides, they provide substantial room to bring high current lead wires out of the coil. This also permits good heat dissipation.

Brand Name:CENTERSKY

Model Number:EI 30---EI 600

Place of Origin:JIANGYIN

...Lamination? Most of transformers in general use are EI transformers.The name”EI” transformer is devided from the core shape.The EI transformer core is made up of EI shaped laminations. Introduction: Single phase EI core is made by the silicon steel strip. The model of EI lamination in standard sizes is from EI-30 to EI-360.The gap sizes of transformer lamination core...

Brand Name:CENTERSKY

Model Number:EI 41, EI 48, EI 57, EI 66, EI 75, EI 78, EI 85.8, EI 96

Place of Origin:Jiangyin, Jiangsu, China

... EI sheets are divided in to waste-free and low-waste types. For waste-free lamination cores, the measurements for the E sheet's winding spaces correspond to the measurements for the associated I sheet. EI lamination cores can be processed manually or

Brand Name:CENTERSKY or Designed Accoeding to customers' demand

Model Number:EI 35, EI 41, EI 48, EI 66, EI 75, EI 85.8

Place of Origin:Jiangyin, Jiangsu, China

... since loss due to eddy currents is less. which has been extensively used in power transformers, Distribution transformers, and Isolation transformers. Introduction: Single phase EI core is made by the silicon steel strip. The

Brand Name:CENTERSKY or NO LOGO

Model Number:3UI240, 3UI270, 3UI300, 3UI360

Place of Origin:Jiangyin, Jiangsu, China

...Lamination Core EI lamination is made by the silicon steel strip. the model of EI lamination in standard sizes is from EI-28 to EI-240, and the model of EI lamination in non-standard sizes is from EI-36 to EI-360. the gap sizes of transformer lamination core can be customized. Introduction: Single phase EI core is made by the silicon steel strip. The model of EI lamination...

Brand Name:CENTERSKY

Model Number:UI 20---UI 100

Place of Origin:JIANGYIN

... of silicon steel is less, so hysteresis loss can be reduced. Introduction: Single phase UI core is made by the silicon steel strip. The model of UI lamination in standard sizes is from UI 20-UI 100.The gap sizes of transformer lamination core can be

Brand Name:CENTERSKY

Model Number:3PEI 20---3PEI 120

Place of Origin:JIANGYIN

... power transmissions since loss due to eddy currents is less. which has been extensively used in power transformers, Distribution transformers, and Isolation transformers Three-phase EI core is made by the silicon steel strip. The model of EI lamination in

Brand Name:CENTERSKY or NO LOGO

Model Number:Three Phase EI100 EI150 EI200 EI300 EI400 EI 500 EI 600

Place of Origin:Jiangyin, Jiangsu, China

... is from EI-30 to EI-360.The gap sizes of transformer lamination core can be customized. To meet the diversified requirements of our valuable clients, we are engaged in offering Transformer Lamination Stamping. To ensure the quality, the offered range is