galvanically isolated channels current loop module

Brand Name:Honeywell

Model Number:TC-OAH061

Place of Origin:USA

...GALVANICALLY ISOLATED CHANNELS CURRENT LOOP MODULE Quick Details TCOAH061 DISCONTINUED BY MANUFACTURER ANALOG OUTPUT MODULE 6 GALVANICALLY ISOLATED CHANNELS CURRENT LOOP MODULE 4-20 MA 13 BITS FACTORY WARRANTY DOES NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED OTHER SUPERIOR PRODUCTS Yasakawa Motor, Driver SG- Mitsubishi Motor HC-,HA- Westinghouse Modules 1C-,5X- Emerson VE-,KJ- Honeywell TC-,TK- GE Modules IC - ABB Module...

Brand Name:Honeywell

Model Number:TC-OAH061

Place of Origin:Japan

... of Points : 6 galvanically isolated channels Output Current Range : 0 to 21.0 mA Current Resolution : 13 bits across 21 mA Output Overvoltage Protection : 24 VAC/VDC continuous at room temperature RFI ...

Brand Name:Honeywell

Model Number:TC-OAH061

Place of Origin:USA

...Current Loop (4-20 mA) Module (Isolated) Analog Output, 6-Point, Current Loop (4-20 mA) Module (Isolated) Number of Points 6 galvanically isolated channels Output Current Range 0 to 21.0 mA Current Resolution 13 bits across 21 mA (2.7 mA) Open Circuit Detection None Output Overvoltage Protection 24 VAC/VDC continuous at room temperature Open Short Circuit Protection Electronically current...

Brand Name:Shinhom

Model Number:HBC-DSR5

Place of Origin:China

...current sensor module HBC-DSR5, analog voltage output magnetic sensor​ HBC-DSR5 Series current sensor with a galvanic isolation between primary and secondary circuit. Current sensor provides accurate electronic measurement of DC, AC or pulsed currents. Features: 1. Magnetic balance ( Hall effect closed loop...

Brand Name:Foxboro

Model Number:FBM203

Place of Origin:US

... a 0 to 320 ohm (FBM203), 0 to 640 ohm (FBM203b), or 0 to 30 ohm (FBM203c) resistance range. Each input channel of the FBM203d accepts a 4-wire RTD sensor input, within a 0 to 320 ohm resistance range. Each analog input is galvanically isolated from

Brand Name:LS

Model Number:LS-THG-SD

Place of Origin:China

...Isolator Remote I O Module Digital Input Switch Input Dry Contact Output 2ch Input Input signal: switch, proximity switch, frequency ≤ 10Hz Distribution voltage: ≈8V (when open) Short circuit current: ≈8mA Output Relay output Characteristics: Response time: ≤20mS Drive capacity: 2A/250V AC; 2A/30V DC Load type: resistive load Input and output characteristics (when set to in-phase control): The field switch is closed or the input loop

Brand Name:Allen-Bradley

Model Number:1756-IF16

Place of Origin:United States

... or the RTB has been removed from the module. When a wire-off condition occurs for this module, two events occur: • Input data for that channel changes to a specific scaled value. • A fault bit is set in the owner-controller that can indicate the

Brand Name:OEM

Model Number:OKY3015-1

Place of Origin:Guangdong,China(mainland)

... Description * SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA * Each channel module can be set high or low triggered by jumper * Fault-tolerant design, even if the control line is broken, the relay will not

Brand Name:DECOWELL

Model Number:EX-310H

Place of Origin:China nanjing

...Channel DO Module,PNP EX-310H Product name EX-310H Current Consumption 72mA Number of Input Channel 16 Input Signal Type PNP Rated Input Voltage PNP:24V DC(±25%) Single-channel Rated Current Max:0.5A (Total Output Current of 8 Channels at the same time:2A) Load type Resistive load, inductive load, lamp load Isolated withstand voltage 500V Debounce time Configurable :1 ～ 10ms, Default :3ms Isolated...

Brand Name:GE

Model Number:8206-TI-IS

Place of Origin:USA

...CHANNEL INTRINSICALLY SAFE MODULE Technical Application The PAC8000 Railbus Isolator is required when using any 2/1 modules in a node . The unit provides galvanic isolation between those modules interfacing to Intrinsic Safe field wiring on the 2/1 side of the isolator...

Brand Name:Allen Bradley

Model Number:1746-NO4I

Place of Origin:USA

1746-NO4I Allen Bradley SLC500 Analog Current Output Module 4 Non-isolated Channels Product Details: Brand Name Allen Bradley Model 1746-NO4I Product ID: N/M Condition New Gross Weight 2.2 lbs / 35....

Brand Name:Original Factory

Model Number:UCC21755QDWRQ1

Place of Origin:CN

...Galvanic Isolated Single Channel Gate Driver SOIC16 Product Description Of UCC21755QDWRQ1 UCC21755QDWRQ1 is a galvanic isolated single channel gate driver designed for SiC MOSFETs and IGBTs up to 2121-V DC operating voltage with advanced protection features, best-in-class dynamic performance, and robustness. UCC21755QDWRQ1 has up to ±10-A peak source and sink current...

Brand Name:BECKHOFF

Model Number:EL2535-0002

Place of Origin:GERMANY

...Channel PWM Output Module Description Model EL2535-0002 Brand/Manufacturer Beckhoff DataSheet/Catalogue In PDF File Weight/Dimension 12 mm x 100 mm x 68 mm Condition Brand new Description EtherCAT Terminal, 2-channel PWM output, 24 V DC, 2 A, current-controlled Technical Data The EL2535-xxxx output terminals control the output current through pulse width control of the supply voltage. They are electrically isolated

Brand Name:GF Signet

Model Number:3-9950.394-1, 3-9950.398-2

Place of Origin:Switzerland

...Channel Conductivity/Resistivity Module type 9950 Product Description: The 9950 Transmitter offers the following module options. 3-9950.394-1 is a Single Channel Direct Conductivity/ Resistivity Module, 3-9950.394-2 Dual Channel Direct Conductivity Module, 3-9950.395-M Modbus Module, and a 3-9950.398-2 Dual Channel 4 to 20 mA Current Loop Output Module. Features: The plug-in modules...

Brand Name:MITSUBISHI

Model Number:Q68DAVN

Place of Origin:China/Japan

...channel analog output module voltage; isolated ext power supply FA-MOD PLC: Analogue I/O Module Series MELSEC-Q SERIES Type ANALOG OUTPUT Power Supply (V) 24 Current Type DC Occupied I/O Points on PLC 16 Integrated Analogue Outputs 8 Output Voltage Range (V) -10-10; 0-5; 1-5 Wiring SCREW Int. Current...

Brand Name:GINRI

Model Number:JR-16L1

Place of Origin:CHINA

DC 24Volt Power Relay Isolation Each Relay Module Channel CE / CCC Ceterfication The PLC amplifier board is a relay board that is used to isolate and amplify current and convert voltage between the PLC and the load. Therefore, it is also called an IO relay...

Brand Name:BECKHOFF

Model Number:KL3408

Place of Origin:Germany

...Channel Analog Input Module KL3408 For Solar Cell Stringer 8-Channel Analog Input Module KL3408 Introduction Analog input terminal modules KL3404, KL3408, KL3464 and KL3468 are used to process signals in the range of - 10 V and + 10 V or 0 V and 10 v. The current is digitized with a resolution of 12 bits and is transmitted to the higher level automation equipment in the state of electrical isolation...

Brand Name:RECOM Power

Model Number:R1S-2409/H

R1S-2409/H RECOM DC DC Converters 9V 111mA 21.6V - 26.4V Input Product Attribute Attribute Value Manufacturer: RECOM Product Category: Isolated DC/DC Converters Number of Outputs: 1 Output Output Power: 1 W Input Voltage, Nominal: 24 V Input Voltage, Min: ...

Place of Origin:SHENZHEN,CHINA

Brand Name:JSD

Model Number:JSD MI 4-20maA-F

...loop-powered isolated module General description: JSD MI 4~20mA-F series isolation amplifier IC is a two-wire loop-powered galvanic isolation module, It adopts electromagnetic isolation technology, Provide power to the two-wire devices, effective solution to the current signal isolation depends on the power supply and achieve the 4 ~ 20mA standard signal isolation...

Brand Name:Honeywell

Model Number:TK-OAH061/TC-OAH061

Place of Origin:USA

... Module Numner of Points : 6 galvanically isolated channels Output Current Range : 0 to 21.0 mA Current Resolution : 13 bits across 21 mA Output Overvoltage Protection : 24 VAC/VDC continuous at room temperature RFI ...