hardness test method

Brand Name:LIYI

Model Number:LY-6031

Place of Origin:Guangdong , China

Ring Tack Adhesive Testing Equipment With 100n Measuring Range It is used to do the loop tack test of kinds of adhesive,tape,can meet FINAT (FINAT Test Method No. 9: measurement), ASTM D6195, PSTC 16 test standard. Application It is small, compact ...

Brand Name:Liyi

Model Number:LY-L80

Place of Origin:Dongguan

...Test Equipment / Rain Environmental Chamber Quick Details Place of Origin:Guangdong, China (Mainland) Brand Name:Liyi Model Number:LY-L80 Power:Electronic, Electronic,220V,50HZ Usage:Rain tester Product Name: LY-L80 Stainless Steel Environmental Rain Environmental Test Chamber 220V Standard:IEC60529 Test method:IPX1,IPX2,IPX3 and IPX4 Controller:English touch screen controller OEM:Offered Test...

Brand Name:LIYI

Model Number:B3020-B

Place of Origin:Dongguan

... wind circle to ensure the uniformity of the working temperature. The battery thermal shock testing Method: Put the battery sample into the test box with the original temperature of 20±5℃ , then rise the temperature to 130±2℃ at the rate of (5±2℃)

Brand Name:kingpo

Model Number:KP-5067-C

Place of Origin:china

... test), QC/T 744-2006(monomer battery test), GB 8897.4-2002, IEC60086-4 , SN/T1414, SN/T1413 , YD1628, GJB2374, QB/T2052, IEC62133-2012, SAE-J2464,etc and any other test approaches needed. Introduction of Test Methods: Make the tested battery ...

Brand Name:kingpo

Place of Origin:china

...the live parts of the lamp string becoming accessible which are caused by the frictions. Technical parameters: The test device is conform to the IEC60598-2-20 clause 113,Fig 2. It is made of stainless steel. Weights: one 15 N and one 30 N Test method: The

Brand Name:kingpo

Place of Origin:china

... compliance; through the tester current measurement, it can determine whether the test conditions meet the "standard". Test Methods 1.1. According to the IEC 61347-1:2012 standard, clause 14.6 a requires that the circuit be connected, as shown in

Brand Name:kingpo

Model Number:ISO 16750-4-figure4

Place of Origin:china

ISO 16750-4 Figure 4 Stainless Steel Test Set - Up For Splash Water Test Jet 5.4.2 Splash water test 5.4.2.1 Test method Heat the DUT in a hot air oven at Tmax for the specified holding time,th. Then splash the DUT with ice water for 3 s. If the DUT is ...

Brand Name:kingpo

Model Number:IEC62368-1-cl.8.5.5.2

Place of Origin:china

...test is performed as follows: – lamp assemblies considered MS3 parts during field replacement are tested separate from the equipment; – lamp assemblies only considered MS3 parts during operation, may be tested separately,or as normally installed in the

Brand Name:HongCe

Model Number:HK1501

Place of Origin:China

...Test Machine Product presentation: Label wear testing machine is used to test the wear resistance of label materials. It is mainly used to simulate the degree of wear the label is subjected to in daily use to evaluate the durability and durability of the label. The label wear testing machine usually adopts a rotary test method, that is, the label sample is fixed on the test...

Brand Name:HongCe

Model Number:HDX1304

Place of Origin:China

... 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.3 and Figure 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. It is used for checking the

Brand Name:LIYI

Model Number:LX-A

Place of Origin:CHINA

...Hardness Tester , High Precision Characteristics and uses: The hardness tester is used for testing the hardness of vulcanized rubber and plastic products. The gauge outfit of the sclerometer is installed on the top of the rack, it is more convenient to operate and test result more precision. Also can take down the gauge outfit and test...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-J205

... test methods are: the home model infant car Taichung, the turntable in the test stage, to adjust the conveyor speed of 1.4 ± 0.1m/sec (5kw / h ± 3.6 kw / h) The. After 64 hours of continuous testing, visual car damage. Up to set the number of times to

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-J201

...Testing Machine Stability Testing Platform Electronic 1. Test method : Baby Stroller Stability Testing Platform is placed on the test plane of the tilt angle of 12 ° , do not use the parking device , first for the front , then rear-facing , then the vehicle lateral placed on an inclined plane , for each test...

Brand Name:HAIDA

Model Number:HD-W810

Place of Origin:China

...Testing Machine Automatic Fabric Moisture Air Permeability Test Equipment Application: Textile Testing Machine Automatic Fabric Textile Air Permeability Tester to determine the resistance of fabrics (woven, knitted and non woven textile materials) to the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head/area. Standard: ASTM D737 Standard Test Method...

Brand Name:Sinowon

Model Number:HV-1000Z

Place of Origin:China

... of small or thin specimens and small areas of larger specimens, Micro hardness testing is commonly used to determine characteristics of thin sheets, foils, fine wire, epoxies, paints, etc. and is often employed in R&D applications . ● Micro hardness is

Brand Name:Sinowon

Model Number:V-5

Place of Origin:china

... hard materials; Except very thin and coated layers, can test almost the metals Characteristics Apply closed loop loading sensor, MPU controls the loading, dwell and unloading process; Equips with LCD screen, show loading force, hardness value, dwell time;

Brand Name:iqualitrol

Model Number:HBS-3000AET

... 5-650HBW Test Force 306.25, 612.9, 980.7, 1225.9, 1838.8, 2415.8, 4903.5, 7355.3, 9807, 14710.5, 29421N (31.25, ...

Brand Name:iqualitrol

Model Number:HRS-150T

....7, 1471N (60, 100, 150kgf) Maximum Height of Specimen 200mm Distance between Indenter Center and Wall 160mm Hardness Resolution 0.1HR Power Supply AC 220V,50Hz Dimension 510*290*730mm Weight 80kg Feature & Use: 1, ...

Brand Name:iqualitrol

Model Number:SHB-62.5

...Hardness Tester Technical Specifications: Model SHB-62.5 Range of Measurement 5-650HBW Test Force 9.807, 24.52, 49.03, 61.29, 98.07, 153.2, 294.2, 31.125, 612.9N (1, 2.5, 5, 6.25, 10, 15.625, 30, 31.25, 62.5kgf) Maximum Height of Specimen 200mm Distance between Indenter Center and Wall 130mm Objective 5X, 10X Total magnification 50X, 100X Hardness...

Brand Name:iqualitrol

Model Number:300HB-3000

...Hardness Tester 300HB-3000 with Touch Screen USB Port Main Features: ● Electronic loading, fully automatic closed-loop sensor control system, high accuracy test force and good stability; ● Adopt ARM high-speed processor, 8-inch LCD touch screen; ● Measure the indentation diameter under the reading microscope, and manually enter the diameter on the LCD screen to display the hardness...