iec 60331 part 11

Brand Name:kingpo

Model Number:IEC 60695-11-4 Figure A.1

Place of Origin:china

Burner -IEC 60695-11-4 Figure A.1 Figure A.1 – Burner method A – General assembly Figure A.2 Burner details

Brand Name:kingpo

Model Number:KP-4913

Place of Origin:china

... 60851-3 Mandrel winding tester Product Description Standard:IEC 60851-3-clause 5.1.1 The tension to be applied to the wire during winding on the mandrel is calculated from the wire diameter to be equivalent to 118 MPa ± 11,8 MPa (118 N/mm2 ± 11,8 N/mm2)

Brand Name:Sinuo

Model Number:SN2210-32

Place of Origin:China

....101figure 104, EN 60335-2-9/A12 Clause 11.3 Figure Z101, IEC 60335-2-11 Clause 11.3figure 101, and etc. It is mainly used to measure the temperature rise on the front surface of the easily accessible parts of electrical appliances such as drum-type ...

Brand Name:Sinuo

Model Number:SN774

Place of Origin:China

IEC 61851-1 PLC Control System Leakage Tracking Test Equipment Product information: The tester is designed and manufactured according to the standard requirements of IEC60112, and required by IEC 61851-1 clause 12.3, IEC 61851-23 clause 11.6, IEC 62196-1Ed.4CDV 2020 clause 28.4, 29.6, IEC60335-1 clause 29.2 and Annex N, IEC 60065:2014 clause 13.4, IEC60598-1, IEC...

Brand Name:Sinuo

Model Number:SN774

Place of Origin:China

...the standard requirements of IEC60112, and required by IEC 61851-1 clause 12.3, IEC 61851-23 clause 11.6, IEC 62196-1Ed.4CDV 2020 clause 28.4, 29.6, IEC60335-1 clause 29.2 and Annex N, IEC 60065:2014 clause 13.4, IEC60598-1, IEC 60884-1:2013 clause 28.2

Brand Name:BRITEC

Model Number:BR-7M 275 2P

Place of Origin:China

...requirement class according to IEC 61643-11. • Low voltage protection level. • The use of high-performance varistors permits a rapid response time and a low protection level, without any ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I07

IEC61032 Figure 7 Device 11 Rigid Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884,IEC60598,IEC60335,IEC60065. It is used to verify the protection of persons aga...

Brand Name:HongCe

Model Number:CL-4

Place of Origin:China

IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine Product details: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10...

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

IEC60695-11-5 Needle-Flame Tester PLC Control, 7 Inch Color Touch Screen Operation, Infrared Remote Control Standard IEC60695-11-5 Test flames-Needle-flame test method-Apparatus,confirmatory test arrangement and guidance Application This part of IEC60695 ...

Brand Name:RISESUN

Model Number:DSZ217（T1-1)）

Place of Origin:Zhejiang. China

...technical standards as per IEC 62052-11 and IEC 62053-21 General Introduction Two Phase Electronic Meter is a low cost electronic active energy meter. It adopts the cyclometer register or LCD.The Technical standards as per IEC 62052-11 and IEC 62053-21 ...

Brand Name:RISESUN

Model Number:DSZ217（T1-1)）

Place of Origin:Zhejiang. China

...technical standards as per IEC 62052-11 and IEC 62053-21 General Introduction Two Phase Electronic Meter is a low cost electronic active energy meter. It adopts the cyclometer register or LCD.The Technical standards as per IEC 62052-11 and IEC 62053-21 ...

Brand Name:Sinuo

Model Number:SN1101

Place of Origin:China

IEC 60335-1 Label Marking Durability Testing Equipment Equipment Overview Application: This label marking abrasion test apparatus meets the requirements of IEC 60335-1 clause 7.14, IEC 60065:2014 clause 5.1, IEC 60950:2013 clause 1.7.11, IEC 60669-1 clause...

Brand Name:Sinuo

Model Number:SN1101

Place of Origin:China

IEC 60065 Clause 5.1 Label Marking Abrasion Test Equipment Product information: This label marking abrasion test equipment is designed and manufactured according to the standard requirements of IEC 60065:2014 clause 5.1, IEC 60335-1 clause 7.14, IEC 60950:2013 clause 1.7.11, IEC...

Brand Name:Sinuo

Model Number:SN1101

Place of Origin:China

..., IEC 60065:2014 clause 5.1, IEC 60950:2013 clause 1.7.11, IEC 60669-1 clause 8.9, etc. 2. It is suitable for all kinds of plastic injection, silk screen surface for abrasion test, such as: computer, mobile phone (PDA), ...

Brand Name:Sinuo

Model Number:SN1101

Place of Origin:China

...14, IEC 60065:2014 clause 5.1, IEC 60950:2013 clause 1.7.11, IEC 60669-1 clause 8.9, etc. It is suitable for all kinds of plastic injection, silk screen surface for abrasion test, such as: computer, mobile phone (PDA), ...

Brand Name:Sinuo

Model Number:SN1101

Place of Origin:China

...-1 clause 7.14, IEC 60065:2014 clause 5.1, IEC 60950:2013 clause 1.7.11, IEC 60669-1 clause 8.9. Technical parameters For Dual Station Label Marking Abrasion Test Apparatus: Test stations Two stations Test ...

Brand Name:Sinuo

Model Number:SN9912-50KVA

Place of Origin:China

...25 clause 22, IEC 60950-1: 2013 clause 4.5, IEC 60065 Clause 4.1.5, 4.2.11 y 4.1.5, etc. This product is widely used in various fields, and provide the power supply system of the customer solutions from power environmental considerations, optimization of

Brand Name:Sinuo

Model Number:SN1101

Place of Origin:China

IEC 60320-1 Clause 8.8 Abrasion Resistance Test Machine Stickers Label Ink Rub Tester Standards: This label marking abrasion test apparatus conforms to IEC60320-1 clause 8.8, IEC 60335-1 clause 7.14, IEC 60065:2014 clause 5.1, IEC 60950:2013 clause 1.7.11, IEC...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

IEC60695-11-5 Needle Flame Test Equipment Complied Standards & Clauses IEC 60695-11-5 “Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance” Equipment Overview Samples and ...

Brand Name:Uchi

Model Number:LED Surge Protection Device

Place of Origin:Dongguan China

...Led Surge Protection Device with Full protection mode, IEC 61643-11 Lightning protection LED Surge Protection Device SPD classification according to EN61643-11 Type 3 SPD classification according to IEC 61643-11 Class III Nominal a.c. voltage Un 230V Max. ...