iec 60529 testing probes

Brand Name:LIB

Model Number:R-800

Place of Origin:china

IEC 60529 Waterproof Tester Description IEC 60529 waterproof tester,The oscillating tube part of this device is controlled by adjustable-speed motor and crank-link mechanism. This device is reciprocating swing from the place of ±60°to another one of ±175°with the speed required by the standard through machine adjusting angle. Main Technical Parameter Name IEC 60529...

Model Number:TP04

2.5mm rod test probe,test probe D iec 61032,test finger probe,test probe IEC 529 IP4X code for impact and access testing Model TP04 2.5mm rod test probe,tes probe Dviec 61032 Test Probe is intended to verify the protection of person aganist access to to ...

Model Number:TP11

...test finger probe,iec testing,test finger probe,access safety test Model TP11: rigid test finger probe,iec testing,allied testing rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe

Brand Name:KingPo

Place of Origin:China

IEC 60529 Environmental Test Chambers With Dia 50um Normal Wire Dust Test Chamber Environmental Tester IEC 60529 IP5X6X Dust Test Chamber Environmental Tester Product Description Sand and dust test chambers are made for the simulation of dust and sand conditions.These test...

Model Number:TP12

... is made of stainless steel with a plastic handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe} Model TP12 Short test pin Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standards. Body is plastic, tip is stainless steel.

Brand Name:HJ

Model Number:HH0810A

Place of Origin:China

Test Device To Verify Protection Against Dust IP Test Equipment Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) clause 13.4, figure 2, dust test for first characteristic number 5 and 6. IEC 60598-1 Luminaires – Part 1: General requirements and test clause 9.2 test for ingress of dust, solid objects and moisture. Standard description of IEC 60598-1: Dust-proof luminaires (first characteristic IP number 5) shall be tested

Brand Name:Sinuo

Model Number:SN446

Place of Origin:China

... 5 IEC 60598-1-2017 “Luminaries-Part1: General requirements and tests” The spray nozzle is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and

Model Number:TP11

... to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe picture 2,

Brand Name:Sinuo

Model Number:SN446B

Place of Origin:China

..., automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4. It meets the requirements of IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4,

Brand Name:Sinuo

Model Number:SN4412-1000L

Place of Origin:China

IEC 60529 IPX9K High Pressure Water Jet Testing Equipment 512L Product introduction Standard:IEC 60529:1989 + A1:1999 + A2:2013 Clause 14.2.9, DIN40050-9, ISO20653 IP degrees of protection provided by enclosures for the electrical equipment in road ...

Brand Name:Sinuo

Model Number:SN447B-Ф12.5mm

Place of Origin:China

...enclosures for electronic and electrical equipment, automotive and motorcycle parts, household appliances, lamps, and other components. The tester complies with IEC 60529-2013 (IPX6), simulating high-pressure water jets from all practicable directions to

Brand Name:Sinuo

Model Number:SN446B

Place of Origin:China

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5 Product information: It meets the requirements of IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4, Figure 5. The spray nozzle is used to ...

Brand Name:JLX

Model Number:LX-1150

Place of Origin:Made in China

... is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. IEC Standard Test Probe 11 was made on stainless steel and

Brand Name:KINGPO

Place of Origin:China

IEC 60529 Ingress Protection Test Equipment IPX3 IPX4 Waterproof Degree IPX34 Waterproof Degrees Test Equipment Introduction: IPX3/4 waterproof degrees test equipment are designed and manufactured according to IEC 60529 < Degrees of protection provided by enclosures (IP Code)>. This equipment is applied in IPX3 ,IPX4 waterproof degrees testing...

Brand Name:JLX

Model Number:LX-1175

Place of Origin:Made in China

...Test Finger Probe of IRAM 4220-1 / IEC 61032 / IEC 60335 Rigid Test Finger Probe is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. Rigid Test Finger Probe...

Brand Name:ALLIED TESTING

Model Number:TP11

test probe 11, accessibility test probe,iec testing Model TP11: test probe 11, accessibility test probe,iec testing rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe...

Model Number:TP13

... probe This pin is used on appliances for verifying that there is no access to hazardous live parts of heating elements which could be touched accidentally by a tool (i.e. screwdriver). Meets IEC & EN requirements. Body is plastic, tip is stainless steel.

Brand Name:ALLIED TESTING

Model Number:TP11

... to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe picture 2,

Brand Name:HJ

Model Number:AM0020

Place of Origin:China

IPX12 drip test chamber | Compliant with IEC 60529, IEC 60068 | Automotive component test equipment with φ0.4mm water jet and 20kg turntable load Products Introduction: This is used to test whether the housing and seal can guarantee the good performance...

Brand Name:kingpo

Model Number:IEC60335-1- clause 20.2.

Place of Origin:china

... 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1.