iec 60950 telecom test probe

Brand Name:Sinuo

Model Number:SN1106

Place of Origin:China

IEC 60950 Clause 2.10.8.4 Harden Steel Pin Scratch Resistance Test Apparatus Equipment Overview 1 Standard compliant The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. It conforms to the standard requirement of IEC 60335-1 clause 21.2, IEC 60950...

Brand Name:kingpo

Place of Origin:china

...IEC60947.1, IEC730.1. It is suitable for Arcing resistance test of electric and electronic products, household appliances and its materials. The working principle is to simulate the electric leakage on the insulator which may cause among different polar of

Brand Name:kingpo

Model Number:KP-AR25

Place of Origin:china

... scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests. Technical Parameters: 1. As per clause 2.10.8.4 of IEC 60950-1/IS

Brand Name:kingpo

Model Number:IEC60335-1- clause 20.2.

Place of Origin:china

... 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1.

Brand Name:Sinuo

Model Number:SN2204

Place of Origin:China

IEC 60950-1 Metal Mandrel Test Apparatus For Tensile Strength Verification Product Information For Metal Mandrel Test Apparatus: This test apparatus conforms to IEC 62368-1:2018 clause 5.4.4, IEC60950-1:2013 clause 2.10.5.8, Annex AA, figure 14~16, IEC60558-1 Fig6, etc. It is used for tensile and electrical strength verification for non-separable thin layer materials. This test...

Brand Name:Sinuo

Model Number:SN9912-50KVA

Place of Origin:China

IEC 60950-1 Variable Frequency Power Supply 50KVA For Control The Frequency And Voltage Product information: The variable frequency power supply is required by IEC 60335-1 Annex S, IEC 60335-2-25 clause 22, IEC 60950-1: 2013 clause 4.5, IEC 60065 Clause...

Model Number:TP04

iec 60529 IP2X code rod test probe iec 60529 IP2X code rod test probe Model TP04 2.5mm rod test probe,tes probe Dviec 61032 Test Probe is intended to verify the protection of person aganist access to to harzardous parts of an IP4 code.Also used to verify ...

Model Number:TP04

2.5mm rod test probe,test probe D iec 61032,test finger probe,test probe IEC 529 IP4X code for impact and access testing Model TP04 2.5mm rod test probe,tes probe Dviec 61032 Test Probe is intended to verify the protection of person aganist access to to ...

Brand Name:Sinuo

Model Number:SN7713A

Place of Origin:China

... and manufactured according to the standard requirements of IEC 62368-1: 2018 Annex S.3, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3 and etc. It is used to simulate that the flammable liquids used in electrical and ...

Model Number:TP11

...test finger probe,iec testing,test finger probe,access safety test Model TP11: rigid test finger probe,iec testing,allied testing rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe

Brand Name:SHC

Model Number:SC-VST

Place of Origin:China

...Testing Machine With Electronic Control Parameters: Test object Equipment enclosures Reference standard IEC 60950, IEC 60065, IEC 60598 Test Impact test - drop and swing Drop height 500-1500mm Impact steel ball 500g Release mode electronic control Swing impact available Power supply 220V 50Hz Description: This device is suitable for drop impact test...

Brand Name:SHC

Model Number:SC-VST

Place of Origin:China

...Testing Machine With Electronic Control Parameters: Test object Equipment enclosures Reference standard IEC 60950, IEC 60065, IEC 60598 Test Impact test - drop and swing Drop height 500-1500mm Impact steel ball 500g Release mode electronic control Swing impact available Power supply 220V 50Hz Description: This device is suitable for drop impact test...

Brand Name:JLX

Model Number:LX-DT1

Place of Origin:Made in China

... Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle ...

Model Number:TP11

... to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe picture 2,

Brand Name:YUYANG

Model Number:YYC002

Place of Origin:China

... ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain ...

Model Number:TP13

... probe This pin is used on appliances for verifying that there is no access to hazardous live parts of heating elements which could be touched accidentally by a tool (i.e. screwdriver). Meets IEC & EN requirements. Body is plastic, tip is stainless steel.

Brand Name:ALLIED TESTING

Model Number:TP11

test probe 11, accessibility test probe,iec testing Model TP11: test probe 11, accessibility test probe,iec testing rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe...

Brand Name:Sinuo

Model Number:SN889-225L

Place of Origin:China

225L Electric Heating Thermostatic Blast Drying Oven Brief Introduction: This oven is used for drying, baking, wax melting and sterilization in industrial and mining enterprises, laboratories, scientific research units, etc. It is required by many ...

Brand Name:ALLIED TESTING

Model Number:TP11

... to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe picture 2,

Model Number:TP41

... probe 41 Model TP41: IEC 61032 test probe 41 For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA requirements. Made entirely of stainless steel.