ignitability test

Place of Origin:China

Brand Name:HongCe

Model Number:HC-1

...IEC60947.1, IEC730.1. It is suitable for Arcing resistance test of electric and electronic products, household appliances and its materials. The working principle is to simulate the electric leakage on the insulator which may cause among different polar of

Brand Name:YUYANG

Model Number:YY510

Place of Origin:CHINA

... to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length 20 mm) reaches the pre-set contact point with the test specimen. Tests may need to

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...Ignitability Test Machine Overview: The glow wire test is to test the stability of electronic and electrical products during operation. The glow wire itself is actually a resistance wire loop with a fixed specification. During the test, it must be heated to a specified temperature by electricity, so that the tip of the glow wire contacts the sample for a standard time, and then observe and measure its state. The test...

Brand Name:Sinuo

Model Number:SN1124

Place of Origin:China

... heating appliances for heating the bed or the human body, it is used to test the flame resistance of the electric blankets, electric heating pads and other similar flexible heating appliances for heating beds or human bodies, and to ...

Brand Name:YUYANG

Model Number:YY510

Place of Origin:CHINA

Product Overview EN ISO 11925-2 Building Material Ignitability Test Apparatus Single-Flame Source Test is designed and made according to ISO11925-2, it is used to test building material under a condition in the absence of external radiation to direct ...

Brand Name:Sinuo

Model Number:SN1124

Place of Origin:China

... heating appliance flammability, to test whether the charged body arcing caused overheating or combustion. In a 65 ± 2 ° C in a heating cabinet, supply the sinusoidal rated output voltage 10KV, ...

Brand Name:YUYANG

Model Number:YY508

Place of Origin:China

... has been designed, principally for testing building materials and composites, but it is capable of testing any sample of size 165mm × 165mm and up to a maximum of 70mm thick. The Apparatus measures the ignition characteristics of exposed surfaces of

Brand Name:YUYANG

Model Number:YY510

Place of Origin:China

... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length ...

Brand Name:SKYLINE

Model Number:SL-FL089

Place of Origin:China

... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length ...

Brand Name:YUYANG

Model Number:YY510

Place of Origin:China

...Ignitability Test Apparatus Description: Ignitability test, also called single-flame source test. Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test...

Brand Name:HOOHA

Model Number:ZY6204

Place of Origin:China

Short Circuit Ignition Test Flammability Test Chamber Teaching Demonstration Laboratory Scope of application: Suitable for experimental teaching and monitoring of electric fire simulation; Through experimental teaching and the actual verification, can ...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

...Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Brand Name:SKYLINE

Model Number:SL-FL88

Place of Origin:China

PC Control Model ISO 5657 Building Materials Ignitability Flammability Tester SL-FL88 Building Material Ignition Performance Tester 1. Machine Introduction This flammability tester is designed for evaluating the ignition performance of building materials...

Brand Name:AI

Model Number:ACT

Place of Origin:China

... Method )”in JTG E20-2011 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. The instrument can determine asphalt content rapidly, correctly, safely and reliably .And it is suitable to ...

Brand Name:YUYANG

Model Number:ACT

Place of Origin:CHINA

... Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engineering T0735-2011 " asphalt mixture of asphalt content test (burning furnace method)" and 671-2006 JT/T "burning asphalt content tester required by the design and manufacture of

Brand Name:AI

Model Number:ACT

Place of Origin:China

... Content Tester by Ignition Method Introduction: The asphalt content tester is designed and made as per T0735-2011 “Asphalt Content Test in Bituminous Mixtures ( Combustion Furnace Method )”in JTG E20-2011 Standard Test Methods of Bitumen and ...

Brand Name:Haida

Model Number:6009-HD

Place of Origin:China

...Ignition Tester Product Description This tester is designed to evaluate the arc resistance performance of electrical/electronic products, household appliances, and their materials. It simulates leakage currents between live parts of opposite polarity or between live parts and grounded metal components, measuring and assessing the arc resistance of insulating materials under specified voltages. Test...

Brand Name:kingpo

Model Number:IEC 60601-1-Figure 34

Place of Origin:china

11 .2.2 M E EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENT 11 .2.2.1 RISK of fire in an OXYGEN RICH ENVIRONMENT In ME EQUIPMENT and ME SYSTEMS , the RISK of fire in an OXYGEN RICH ENVIRONMENT shall be reduced as far as possible...

Brand Name:YUYANG

Model Number:YY123

Place of Origin:CHINA

... flammability tester test method covers the evaluation of the flammability of textile fabrics as they reach the consumer for or from apparel other than children’s sleepwear or protective clothing. PRODUCT SPECIFICATIONS Time display 0-99.0s Ignition

Brand Name:SKYLINE

Model Number:SL-FL15

Place of Origin:China

Building Material Flammability Test Furnace with Touch Screen Control Description The building materials flammability test furnace is in the normal combustion environment, with a small flame directly impacted the vertical specimen to determine the ...