inductive amp probe

Brand Name:GFUVE

Model Number:Q8-3

Place of Origin:China

Ratio 1000:1 Finest Inductive Current Clamp Clip On CTs Online for Measurement The GFUVE Clip On CTs Q8-3 clamps around the current carrying conductor to perform noncontact current measurements while without interrupting the circuit under test. The Q8-3 ...

Model Number:GLD-PIF0170B-BABA

Brand Name:golenda

Place of Origin:Guangdong, China

...temperature probe, these induction hobs provide precise control over cooking temperatures, allowing you to achieve perfect results with ease. The temperature probe eliminates the need for guesswork by accurately monitoring the internal temperature of your

Brand Name:JP SENSOR

Model Number:MFP

Place of Origin:Anhui, China

...Probe For Induction Cooker And Electric Oven Product Description: This product has a heat resistance of 250℃, which is made of Glass fiber silicone wire, a resistor connected with copper tape, and stainless steel probe. Features: Comply with RoHS standard Operating temperature range: -40℃~250℃. Application: Induction...

Brand Name:GIONIEN

Model Number:GIT470SP

Place of Origin:China

...does this mean for you? More safety and greater convenience. The lower temperature keeps both big and little hands safe from burning. Not only that, but an induction cooktop brings 2 litres of water to a boil twice as fast as a glass-ceramic cooktop, which

Brand Name:HNMC

Model Number:MC200

Place of Origin:China

...Probe iProbe MC200: Rated Primary Input: 5A Maximum Primary Input: 50A Secondary Output: 10mV/ A Frequency: 45 Hz to 60 Hz Opening: 15mm/ 0.59`` Output Cable: 3.00m/ 9.8 FT PVC insulated reinforced coaxial cable Cable Termination Options: BNC connector OR Ø 4mm RED/ BLACK banana plugs CAT II RoHS Compliant. Iprobe Clamp-on Current Transformer Models Part Number Rated (Amp) Max (Amp...

Brand Name:Daruifuno

Model Number:CTZN

Place of Origin:China

Inductive Conductivity Sensor Digital Modbus RS485 With Temperature Compensation The inductive conductivity sensor CTZN is not sensitive to fouling. The inductive conductivity probe can measure the conductivity, salinity and temperature. The application of the inductive conductivity sensor is as follows: Urban wastewater treatment Industrial effluent treatment Surface water monitoring Seawater Fish farming Introduction Of The Inductive

Brand Name:ORD

Model Number:DSP-100KW

Place of Origin:China

Induction Heating Machine For CCV Cross Linked Cable Production Line Features This Equipment system uses the characteristics of induction heating’s non-contact heating, adopts encoder to measure speed in real time, infrared probe to measure temperature...

Brand Name:p&f

Model Number:3RG4023-0KB00-PF

Place of Origin:USA

3RG4023-0KB00-PF | Pepperl Fuchs | Inductive sensor Product Overview The Pepperl+Fuchs 3RG4023-0KB00-PF is an inductive proximity sensor built for reliable operation in industrial environments. It offers an extended operating voltage range and a wide ...

Brand Name:YMD

Model Number:101-090-134

Place of Origin:China

... Number 101-090-134 Description INDUCTIVE TRACKING DEVICE WITH AMP PLUG FOR GERBER SPREADER CUTTER ; SPREADER SY101 SY50 SY100 PARTS Weight 0.07 kg/pc Delivery Time In stock ...

Brand Name:TMTeck

Model Number:F3

Place of Origin:China

... probe Working principle: electromagnetic induction principle Measuring the thickness of non-magnetic coatings on magnetic metal substrates Workpiece measurement temperature range: 0~300℃ Measuring range: 0~3000μm Measurement error: ±(1%+2µm) Probe ...

Place of Origin:Dongguan，Guangdong,China

Brand Name:UCHI

Model Number:Aluminum Case Induction Cooker Thermistor Temperature Sensor Probe

...Induction Cooker Thermistor Temperature Sensor Probe Quick Detail: Epoxy filled Al cup, end is easy to attach to flat surface. Construction provices maximum surface contact. Description: NTC Thermistor can be assembled in housing in a variety of configurations for temperature sensing, measurement, detection, indicator, monitoring and control. Thermistor temperature sensor probe...

Brand Name:MEASTEK

Model Number:HCTS3000A

...Probe 1mV/A Flexible Induction Coil, Suitable For Large Current And Complex Current Waveform Measurement High-bandwidth and high-current measurement 30MHz high-frequency bandwidth, capable of measuring high-frequency current signals. High Frequency Current Probe...

Brand Name:HUATEC

Model Number:Weld Probe

Place of Origin:China

...Probe with Cable The eddy current weld probe is a specialized eddy current testing device for detecting surface and near-surface defects in welds. Based on the principle of electromagnetic induction, it can penetrate coatings for detection and resist surface roughness interference. It is suitable for non-destructive testing of various metal welds. Resistance 3.6 ohms Inductance...

Brand Name:iqualitrol

Model Number:CM-8829H

...Induction Coating Thickness Gauge CM-8829H with Measuring Range to 12mm Technical Data Download: iqualitrol Coating Thickness Gauge CM-8829H Application: The F probes measure the thickness of non-magnetic materials on magnetic materials. Anticorrosion Coating Thickness Gauge CM-8829H is equipped with the large range of F probe. Measuring method: F probe...

Brand Name:HUAguard

Model Number:HUA-101X

Place of Origin:China

... sealed type touch guard tour system patrol probe for watchmen. HUA-101X guard touring system with the software is one of the world's leading touch induction recognition technology, computer network communication and data processing technology, to

Brand Name:SINOWON

Model Number:TG-400

Place of Origin:DONGGUAN CHINA

... coating on magnetic metal substrate, as well as non-conductive coating on non-magnetic metal substrate. ● Five types of probes (F400, F1, F10, N1, CN02) are available for different application. F10 probe measures up to 10mm. ● Two measuring modes:

Brand Name:iqualitrol

Model Number:CM-8826

... measure the thickness of non-conductive coatings on non-magnetic metals. Features: 1, Two measuring methods: magnetic induction (F) and eddy current (N) 2, Two measurement mode: Single and Continuous(Notice:Continuous mode is convenient to measure the

Brand Name:PF

Model Number:NBN10-F10-E2-V1

Place of Origin:USA

Pepperl+Fuchs NBN10-F10-E2-V1 Product Details: Manufacturer : Pepperl+Fuchs Product No. : NBN10-F10-E2-V1 Inductive sensor General specifications Switching function Normally open (NO) Output type PNP Rated operating distance 10 mm Installation non-flush ...

Brand Name:TX

Place of Origin:China

10A High Current DIP Accept Customized Service Spring Loaded Pogo Pin The Pogo pin can better transmit the high-frequency signal of the antenna. Compared with the antenna single piece, the Pogo pin has smaller distributed capacitance and distributed ...

Brand Name:Bently Nevada

Model Number:330101-00-27-50-02-05

Place of Origin:USA

... and vibration of rotating machinery. This probe uses inductive technology to monitor shaft movement without physical contact, ensuring durability and accuracy in harsh industrial environments. It is primarily used for early ...