load testing service

Brand Name:lixian

Model Number:HZ-1007E

Place of Origin:China

...Test Machine Computer Control PP Material Adhesion Tester Electronic Maximum Load 1kn ASTM D3759 Standard Peel Test Machine Main Function This Series machine can be applied to test lots of materials in tensile,compression, tear, Adhesive Tape peel ( 90 degrees and 180 degrees) and other small mechanical test...

Brand Name:lixian

Model Number:HZ-1007A

Place of Origin:China

..., convenient operation, Tensile Test Machine can be tested on the operated table, Using the electronic control systems, load sensor is rising and falling to test the tension or compression through the motor rotation, transmission machinery and T-screws.

Brand Name:lixian

Model Number:HZ-003

Place of Origin:China

...Test Machine Capacity Load 2000kN Piston Diameter Φ130mm With Computer Windows Operation 200ton Tensile Test Machine adopt oil cylinder mounted under the host, mainly for metals, non-metallic tensile, compression and bending test.Used in metallurgy, construction, light industry, aviation, aerospace, materials, universities, research institutes and other fields.Test...

Brand Name:TOP SENSOR

Model Number:SS-05

Place of Origin:China

...Load Cell / Tension Compression Load Cell S beam Load Cells, Tension and Compression Weighing Model: SS-05 Capacity: 500KG, 1000KG Features: S shape Load Cell, High Capacity range from 500KG to 1000KG Alloy Steel Structure, Good performance, High accuracy and low costs, Laser Sealed, Water Proof to IP66, Applications: Crane scale, hopper scale and other electronic weighing test...

Brand Name:HAOLI

Model Number:GQ12

Place of Origin:Chengdu

... Surge Current:40A(RMS)maximum for AC 230V/50HZ full load test Maximum Power:15.6W(24V/650V)mA Input Voltage:AC90V-264V50/60HZ Output Load:0%~100% Efficiency:Five or Six Level energy efficiency Working Temp:0℃

Brand Name:ELT

Model Number:SOSMA-JR-1W

Place of Origin:Shaanxi, China

...Load Termination From test and measurement to military and aerospace, RF terminals/RF loads are essential components that run through the RF signal chain. In essence, RF loads and terminals describe the same type of components, that is, passive components that absorb RF energy at the terminals of the signal chain branches. In most applications, The load...

Brand Name:XD

Model Number:AN-5

Place of Origin:China

...testing machine with accurate printed recording Technical parameters: Model PG-AN-5 PG-AN-10 PG-AN-50 Max torque(Kgf-mm) 300kgf-mm 600kgf-mm 2000kgf-mm Max load(Kgf/N) 5kgf/50N 10kgf/100N 50kgf/500N Min torque value (gf-mm) 0.1gf-mm 1gf-mm Min load value (N) 0.001N 0.01N Unit N , gf , kgf Length unit mm,cm,m Testing...

Brand Name:XD

Model Number:AN-50

Place of Origin:China

...testing machine with accurate printed recording for torsion force Technical parameters: Model PG-AN-5 PG-AN-10 PG-AN-50 Max torque(Kgf-mm) 300kgf-mm 600kgf-mm 2000kgf-mm Max load(Kgf/N) 5kgf/50N 10kgf/100N 50kgf/500N Min torque value (gf-mm) 0.1gf-mm 1gf-mm Min load value (N) 0.001N 0.01N Unit N , gf , kgf Length unit mm,cm,m Testing...

Brand Name:HTI

Model Number:TW-270

Place of Origin:Guangdong,China(mainland)

...Test TW-270 Toys Testing Equpment Description: Inclined plane device angle ajustable range: 0-15degree Aluminum frame Inclined plane use imported plate,19mm Fine core plate Use P60 alumina and abrasive paper to cover the plane. oblique plane size:W*L1000*1500mm (or specified by customer) Applications: Use the toys can be loaded one child weight. Loading...

Brand Name:HTI

Model Number:HTX-003

Place of Origin:Guangdong,China(Mainland)

...Testing Equipment Detailed Descriptions: Place the heel lift onto the abrasion paper mounted on this tester. Abrade the specimen under specified load at a certain abrasion times to assess its abrasion degree. Specification: Load 1400,1700,2200g Rubbing Hammer 38*36mm Counter 0~99,999 Dimension(L*W*H) 680×200×260mm Weight 8kg Advantages: 1. Speciality in testing...

Brand Name:HTI

Model Number:HTX-021

Place of Origin:Guangdong,China(Mainland)

...PU, rubber, cloth and other materials. Applied load on the specimen, the distance between the clamp and reciprocating distance can be adjusted, gradually narrow the fixture distance, make 2 pieces of sample cloth gently applied load after contact, through

Brand Name:HTI

Model Number:HTX-004

Place of Origin:Guangdong,China(mainland)

...Tester / Footwear Testing Equipment Detail Descriptions: Put the heel lift into the testing machine,After the regulation number and load Back and forth friction ,observation its abrasion resistant degree. Specifications: Specimen: 140*50mm Loading: 14N ...

Brand Name:HTI

Model Number:HTX-056

Place of Origin:Guangdong,China(mainland)

... Footwear Testing Equipment Detail Descriptions: Put the heel lift into the testing machine,After the regulation number and load Back and forth friction ,observation its abrasion resistant degree. Specifications: Specimen: 140*50mm Loading: 14N ...

Brand Name:HUST Tony

Model Number:TNJ-002

Place of Origin:Guangdong,China(Mainland)

....It is used for testing the mechanical performance of all kinds of chairs. Technical parameters: Specification of frame:3m x 3 mx2.3m,(L×W×H), it is made of 80x80mm aluminum Loading cylinders:Five horizontal and Five Vertical, diameter:50mm,route:300mm,

Brand Name:HUST Tony

Model Number:TNJ-023

Place of Origin:Guangdong,China(Mainland)

...test the seats (such as chairs, office chairs) forward stability. The purpose of these tests is to evaluate the front and rear stability of chairs. Standard : ANSI/BIFMA X5.1-2017-12.4 Front Stability; EN 1022, EN 1729-2 Specification Power Electronic Seat surface loading Max 600N Horizontal force 20N Loading...

Brand Name:XD

Model Number:AN-5

Place of Origin:China

...testing machine with accurate printed recording Technical parameters: Model PG-AN-5 PG-AN-10 PG-AN-50 Max torque(Kgf-mm) 300kgf-mm 600kgf-mm 2000kgf-mm Max load(Kgf/N) 5kgf/50N 10kgf/100N 50kgf/500N Min torque value (gf-mm) 0.1gf-mm 1gf-mm Min load value (N) 0.001N 0.01N Unit N , gf , kgf Length unit mm,cm,m Testing...

Brand Name:XD

Model Number:AN-50

Place of Origin:China

...testing machine with accurate printed recording for torsion force Technical parameters: Model PG-AN-5 PG-AN-10 PG-AN-50 Max torque(Kgf-mm) 300kgf-mm 600kgf-mm 2000kgf-mm Max load(Kgf/N) 5kgf/50N 10kgf/100N 50kgf/500N Min torque value (gf-mm) 0.1gf-mm 1gf-mm Min load value (N) 0.001N 0.01N Unit N , gf , kgf Length unit mm,cm,m Testing...

Brand Name:HUST Tony

Model Number:TNJ-002

Place of Origin:Guangdong,China(Mainland)

....It is used for testing the mechanical performance of all kinds of chairs. Technical parameters: Specification of frame:3m x 3 mx2.3m,(L×W×H), it is made of 80x80mm aluminum Loading cylinders:Five horizontal and Five Vertical, diameter:50mm,route:300mm,

Brand Name:HUST Tony

Model Number:TNJ-023

Place of Origin:Guangdong,China(Mainland)

...test the seats (such as chairs, office chairs) forward stability. The purpose of these tests is to evaluate the front and rear stability of chairs. Standard : ANSI/BIFMA X5.1-2017-12.4 Front Stability; EN 1022, EN 1729-2 Specification Power Electronic Seat surface loading Max 600N Horizontal force 20N Loading...