loopback ic standby mode

Brand Name:Texas Instruments

Model Number:SN65HVD233DR

SN65HVD233DR CAN Interface IC Standby Mode Loop-Back Product Attribute Attribute Value Select Attribute Manufacturer: Texas Instruments Product Category: CAN Interface IC RoHS: Details Series: SN65HVD233 Type: High Speed CAN Transceiver Mounting Style: SMD...

Brand Name:TI

Model Number:SN65HVD230DR

... for Up to 120 Nodes on a Bus Adjustable Driver Transition Times for Improved Emissions Performance – SN65HVD230 and SN65HVD231 • SN65HVD230: Low Current Standby Mode – 370 μA Typical •

Brand Name:Begate，or OEM

Model Number:SC OM4 MPO MTP Loopback

Place of Origin:Made in China

...Loopback PVC Single Mode Duplex Fiber Loopback Module Product Discription of MPO MTP Loopback: Fiber Loopback Module can provide an economical solution for many fiber optic test applications. Fiber Loopback Module is designed to provide a media of return patch for a fiber optic signal.MTP/ MPO Fiber Loopbacks...

Brand Name:Sunwise

Model Number:LC/APC

Place of Origin:CHINA

...Loopback Adapter Single Mode Fiber Loopback Connector PVC Material Fiber Loopback Module is designed to provide a media of return patch for a fiber optic signal. Typically it is used for fiber optic testing applications or network restorations.For the testing applications, the loopback signal is used for diagnosing a problem. Sending a loopback test to network equipment, one at a time, is a technique for isolating a problem. Fiber Loopback

Brand Name:Original

Model Number:SN65HVD230DR

Place of Origin:Original

SN65HVD230DR Electronic Components IC Chips Integrated Circuits IC PRODUCT DESCRIPTION CAN Interface IC STANDBY MODE PRODUCT PROPERTIES Manufacturer: Texas Instruments Product Category: CAN Interface IC Mounting Style: SMD/SMT Package / Case: SOIC-8 Series...

Brand Name:Texas Instruments

Model Number:SN65HVD230DR

Place of Origin:Original

SN65HVD230DR Electronic Components IC Chips Integrated Circuits IC PRODUCT DESCRIPTION CAN Interface IC STANDBY MODE PRODUCT PROPERTIES Manufacturer: Texas Instruments Product Category: CAN Interface IC Mounting Style: SMD/SMT Package / Case: SOIC-8 Series...

Brand Name:Blueto

Model Number:LC

Place of Origin:China

...Loopback Optical Fiber Loopback LC Single Mode Multi Mode OM3 OM4​ Fiber Optic Loopbacks is designed to provide a media of return patch for a fiber optic signal; typically it is used for fibertesting applications or network restorations. For the testing applications, the loopback...

Place of Origin:CN

Brand Name:Original Factory

Model Number:P3T2030AUK

Sensor IC P3T2030AUK UFBGA4 Digital Temperature Sensor With Standby Mode [MJD Advantage] + 15 years experience for electronic components + Secure Ordering + Excellent Feedback + Delivery Date Guaranteed + 100% Low Price Guaranteed + Export to 108 countries...

Place of Origin:China

Brand Name:Petrainer

... and light; 4. Big LCD displays & LED light; 5. Power saving design with automatic standby mode; 6. Easy to operate and ergonomic transmitter; 7. Durable and adjustable nylon strap with max length 54cm; 8. Patented design and certificate with CE, R&...

Brand Name:Texas Instruments

Model Number:TPS65131RGER

Place of Origin:Multi-origin

TPS65131RGER - Power Management IC Features: • Wide input voltage range • Output voltage selection • Integrated low drop-out regulator • Output current up to 2A • Thermal shutdown protection • Over-temperature protection • Over-voltage protection • Over-...

Model Number:TJA1050

100% New TJA1050 TJA1050T sop-8 Chipset TJA1050 TJA1050T CAN Interface IC TJA1020 TJA1021 TJA1040 TJA1042T TJA1050 SOP8 TJA1050 High speed CAN transceiver GENERAL DESCRIPTION The TJA1050 is the interface between the Controller AreaNetwork (CAN) protocol ...

Brand Name:Alphasense

Model Number:OPC-N3

Place of Origin:UK

OPC-N3 Atmospheric Particle Monitor Standby Mode Power Reduction PM2.5 sensor/atmospheric particle monitor OPC-N3 is an upgraded product of OPC-N2, the appearance size is the same as OPC-N2, the measuring range is 0.38-40um, and it can measure up to 2,000...

Brand Name:Anhang

Model Number:AH-LI-D

Place of Origin:China

This Low-intensity Double light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height.Main-standby mode ensure the obstacle is always marked even one light fail. Compliance ** ICAO Annex ...

Brand Name:TOPLED

Model Number:indoor p3 p3.91 p4.81 p4 p5

Place of Origin:CHINA

... type SMD2121 Module Size 192×96 Module Resolution 64×32 Module Max. Current 3A Driving Mode Constant Current IC Scanning Mode 1/16 Horizontal Viewing Angle 140 Vertical Viewing Angle 140 Brightness 1500 Grey Scale 16bit Refresh ...

Brand Name:New Light

Model Number:SC

Place of Origin:Shenzhen China

...Loopback Product Name Single-Mode Fiber SC UPC Optic Fiber Loopback Module Communications Connections Fiber Optic Loopback Description This is the SC connector single-mode loopback. The color of the SC connector is blue. The fiber optic loopback has single-mode and multimode type. The single-mode...

Brand Name:TTI

Model Number:loopback

Place of Origin:Shenzhen,China

...; Single mode, 9/125 fiber optic cable 3. SC connectors with precision ceramic ferrule for maximum optical performance 4. Molded connector to secure ...

Brand Name:OEM

Model Number:MPO-8F-F-SM-A-H

Place of Origin:CHINA

...Mode G657A2 MTP MPO Patch Cable Green Black Housing Color MTP / MPO Fiber Optic Loopback Tester Single mode 9/125um G657A2 Loopbacks are built to link Transmitter (TX) and Receivers (RX) positions of MPO transceivers interfaces. MPO loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO trunks/patch leads. Features ◆ Fiber Optic Loopback...

Brand Name:XYFiber/OEM

Model Number:SC Loopback

Place of Origin:Shanghai,China

... way of testing the transmission capability and the receiver sensitivity of network equipment. Quick Detail: Connector: LC, SC, MTRJ, MPO Mode: Singlemode and Multimode OM3 Fiber end-face: UPC, APC Fiber mode: G652D, G657A1, G657A2 Cable diameter: 0.9mm, 2

Brand Name:HICORPWELL

Model Number:LC Duplex PVC Single-mode Fiber Loopback Module

Place of Origin:China

...mode Fiber Loopback Module Cable for Data Center Hicorpwell Loopback Modules are designed for testing and engineering purposes. Our Fiber Loopback Module is designed to provide a media of return patch for a fiber optic signal. Typically it is used for fiber optic testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem. Sending a loopback...

Brand Name:hanxin or OEM

Model Number:LC

Place of Origin:Shenzhen ,China

.... Loopbacks are useful for testing equipment to determine where a fault might lie. These have a very compact design, and like all of our products, may be custom ordered to have different lengths, jackets, etc. Our loopbacks are compliant with ATM,