luminaire testing laboratory

Brand Name:BRICTEC

Place of Origin:China

BRICTEC Brick Raw Material Analysis Service for Composition Analysing and Testing Xi'an Brictec Engineering Co., Ltd. provides a series of brick factory services including: raw material analysis, design and guidance, accessories supply, upgrade and ...

Place of Origin:Shenzhen China

Brand Name:CE mark

Model Number:CE_LVD,EMC,R&TTE,Notified Body CE

European Notified Body and Approvals R&TTE Notified Body Service (99/5/EC) Radio and Telecommunications Terminal Equipmentin Europe must comply with the R&TTEdirective , which is a so called'new approach' directive based on the bluebook (and global ...

Brand Name:LCS

Model Number:Optional

Place of Origin:CN

US FCC certification FCC certification is the mandatory EMC certification in the United States FCC certified product range 1. Power supply FCC certification: communication power supply, switching power supply, charger, display power supply, LED power ...

Brand Name:LCS

Model Number:Optional

Place of Origin:CN

Certification introduction: The full name of FCC is Federal Communications Commission, and Chinese is the Federal Communications Commission of the United States. Established in 1934 by COMMUNICATIONACT, it is an independent agency of the U.S. government...

Brand Name:Sinuo

Model Number:SN9913

Place of Origin:China

... and lamp aging life test. The equipment adopts PLC programming control, which can control the lamp aging time and cycle time, etc. It is divided into 3 layers of independent control for various luminaires test requirements. It is equipped with 3 sets of

Brand Name:Sinuo

Model Number:SN9913

Place of Origin:China

... adopts PLC programming control, which can control the lamp aging time and cycle time, etc. It is divided into 3 layers of independent control for various luminaires test requirements. It is equipped with 3 sets of independent voltage regulators, and the

Place of Origin:China

Brand Name:KeRang

... load test to ground accessed luminaires. Test sample: Rated voltage not over 1000V ground accessed luminaires Feature: Simulating to actual environment fix the luminaires, oil cylinder to drive the rubber hammer to applying static load to the lamps and

Brand Name:KeRang

Model Number:KR-DD-010

Place of Origin:China

... load test to ground accessed luminaires. Test sample: Rated voltage not over 1000V ground accessed luminaires Feature: Simulating to actual environment fix the luminaires, oil cylinder to drive the rubber hammer to applying static load to the lamps and

Brand Name:PEGO

Model Number:PG-SPD

Place of Origin:China

...Test A​ Luminaire Suspending Test Device 1. Introduction The luminaire suspending test device is for the load performance test of all suspended luminaire and assesses the deformation of components of the suspension system as per IEC60598-1 clause 4.14.1 (test A). A constant evenly distributed load equal to four times the weight of luminaire shall be added to luminaire...

Brand Name:SHC

Model Number:SC-GRE

Place of Origin:China

... 20KN Rubber punch diameter 50mm, thickness 50mm Maintain time 5-10s for torque test, 1min for static load test Station 1 station Standard IEC 60598-2-13 Clause 13.6.1, 13.6.2 Control Mitsubishi PLC Display Touch screen ...

Brand Name:SHC

Model Number:SC-GRE

Place of Origin:China

... 20KN Rubber punch diameter 50mm, thickness 50mm Maintain time 5-10s for torque test, 1min for static load test Station 1 station Standard IEC 60598-2-13 Clause 13.6.1, 13.6.2 Control Mitsubishi PLC Display Touch screen ...

Brand Name:PEGO

Model Number:PG-TQD

Place of Origin:China

...14.1 (test B), the test device is applied to assess whether the mechanical suspended device of rigid suspension luminaire has sufficient safety factor under the effect of constant torque force. The torque time and torque angle can be display at real time,

Brand Name:PEGO

Model Number:PG-BMD

Place of Origin:China

... moment test for semi-luminaires. For the semi-luminaires intended for connection to Edison screw or bayonet lampholders the mass and effective bending moment shall not exceed the maximum value. 2. Parameter Control mode Manual control Test station 1

Brand Name:PEGO Group

Model Number:PG-TE598

Place of Origin:China

... test equipment is designed to meet the test requirements of of IEC60598-2-13 clause 13.6.1 and 13.6.2. It is applied for recessed luminaires to test the resistance to static load, torque load and shear load, tthe purpose is to simulate the stress of such

Brand Name:PEGO Group

Model Number:PG-TL598

Place of Origin:China

...Luminaires Torque Load Test Apparatus 1. Introduction The ground recessed luminaires torque load test apparatus is designed according to IEC60598-2-13 figure 13.6.2.1 “torque test”. Parts of luminaire that may be subjected to rotational force shall have adequate mechanical strength. The joints between these parts shall be subject to a 50N torque force for one minute. Each joint shall be tested

Brand Name:PEGO

Model Number:PG-BDT

Place of Origin:China

...Test Equipment for Adjusting Luminaire Conforms to IEC60598-1 Clause 4.14.3 1. Introduction The bending test equipment for adjusting luminaire is designed to meet the test requirement of IEC60598-1 clause 4.14.3. The flexible cord or cable of adjusting luminaire...

Brand Name:PEGO GROUP

Model Number:PG-TCN

Place of Origin:China

...Luminaire Test Chain / Short Circuit Test Chain Made by 63%Cu/37%Zn and with 2.5Ω/m Resistance 1. Introduction Test chain is designed according to GB7000.1 and IEC60598-1 clause 4.26.3 & figure 29 . It is mainly applied to provided a prevent the impairing of safety due to unintended short-circuiting of uninsulated accessible SELV part of opposite polarity. The test...

Brand Name:Sinuo

Model Number:SN995

Place of Origin:China

...Luminaire Bending Moment Test Equipment For Screw Or Lampholders Product Information For Semi-Luminaire Bending Moment Test Equipment: It is conforming to IEC 60598-1clause 4.14.2, Mainly used to detect the bending moment of a semi-luminaire intended to be connected to a screw or bayonet socket due to its own weight.to Test...

Brand Name:HongCe

Place of Origin:China

...Luminaires Light Testing Equipment IEC 60598-2-13 ​ Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load test and torque test...

Brand Name:Sinuo

Model Number:SN992

Place of Origin:China

... and figure 29 Samples and Restrictions For Test Chain: Luminaires uninsulated accessible SELV parts of opposite polarity Test Principle For Test Chain: The test chain of sufficient length of an uncoated metal, having links and made of 63% Cu / 37% Zn, and