meter testing accessory probe

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I24

... from above and flat surface can be touched when the blade is rotating. The test is achieved by applying a cylindrical rod from any position where the angle between the probe and the blade above is 45°to touch the blade. During the test, it shall not be

Brand Name:PEGO

Model Number:PG-60950

Place of Origin:China

... Test Probe Kit Contains Jointed Finger Probe Rigid Test Finger Ball Pressure Test Apparatus ect. The PG-60950 contains the devices listed in the core of the UL / IEC / EN 60950 requirements. It includes the following probes: 1. Jointed Finger Probe ...

Brand Name:PEGO GROUP

Model Number:PG-IC101

Place of Origin:China

...Test Probe as per IEC60335-2-25 Fig 101 1. Introduction of interlock concelament test probe The interlock concelament test probe is designed according to IEC60335-2-25 clause 22.105 and figure 101, it is applied to microwave oven. 2. Parameter of interlock concelament test probe Diameter of test...

Brand Name:Sinuo

Model Number:SN2210-4

Place of Origin:China

...Test Rod Probe D Test Probe With Alligator Clip Product overview: This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire. Applicable standard This probe conforms to the standard requirement of IEC61032 figure 4 test probe...

Place of Origin:China

Model Number:TP18

...Probe, test finger probe,safety access test probe Model TP18 Jointed Child Finger Probe ( 0 - 36 months ) Model TP19: Jointed Child Finger Probe ( 3 - 14 years ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I11

...Test Probe 17 Test Wire Product information: The test wire confirms to the IEC61032 figure 11 test wire 17 standard requirements. It is used to verify whether the live parts of the electric toy can be touched. It is equipped with handle which is made of nylon. Customizable: It can be used for enclosure protection test...

Brand Name:ALLIED TESTING

Model Number:TP11

... to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe picture 2,

Model Number:TP02

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Place of Origin:China

Brand Name:HongCe

Model Number:HT-U07

...Test Probe Product details: It conforms to standard requirement of UL1278 Fig 10.3. The handle is made of nylon and the probe is made of stainless steel. Standard:UL1278 Fig 10.3. Application:The heating element and any part of the element assembly (such as an element support, sheath and similar parts) shall be so guarded that flammable material as well as persons will be protected against contacting it. Test...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I23

... information: Telecom test probe complies with IEC60950 figure 2C and UL6500 figure B.1 standards. It is used for the bare parts of TNV circuits of information technology equipment to see whether they have sufficient ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I27

...Probe Product information: This testing probe is used to verify the protection against access to hazardous parts through top openings. It meets IEC, EN, UL and CSA Standards, including IEC 1010, IEC60065, EN61010-1, UL3101-1, and CSA 1010-1. Customizable: it can be used for anti-electric shock test when it is equipped with amphenol connector or used for enclosure protection test...

Brand Name:HongCe

Model Number:HT-I36

Place of Origin:China

...Probe Above 14 Years Old Joint Test Probe The young adult joint arm probe conforms to EN 50636-2-100 figure 1 and IEC 50636-2. It is used to simulate the young adult who are older than14 years to test whether the hazardous parts can be touched. Customizable: It can be used for anti-electric shock test...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I10

...Test Probe 14 Test Bar Product information: The test bar conforms to the IEC61032 figure 10 Test probe 14 standard requirement. It is used to verify the protection against access to hazardous live parts of socket-outlets through shutters. It is equipped with the handle which is made of nylon. Customizable: It can be used for enclosure protection test...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I28

.... It is used for interlocking apparatus of the covert door of microwave oven. Customizable: it can be used for anti-electric shock test when it is equipped with amphenol connector or used for enclosure protection test when open threaded hole of M6 at

Brand Name:SHC

Model Number:SC-F1218 F1319

Place of Origin:China

Figure 12 13 Children Safety Test Finger Probe 18 19 IEC61032 Main specification and corresponding technical parameters: Parameters /Model Children’s finger probe SC-F1218 Children’s finger probe SC-F1319 1 R4.3±0.05 mm R2.8±0.05 mm 2 Ф8.6±0.1 Ф5...

Brand Name:KingPo

Place of Origin:China

IEC 61032 Figure 7 Test Finger Probe To Verify Mechanical Strength IEC61032 Figure 7 Rigid Finger Probe To Verify Mechanical Strengthen Of Openings In The Enclosure Or Internal Barrie Products information: This rigid finger probe conforms to the standard ...

Brand Name:KingPo

Place of Origin:China

PA130A PA135A Test Finger Probe For Electrical Equipment Enclosure PA130A UL Probe Product Details This probe conforms to standard requirement of UL507-2006(PA135A) Figure 9.1, UL749 Figure 1, UL982 Figure 58.6 and UL1278 Figure 8.1(PA130A). It is ...

Brand Name:KingPo

Place of Origin:China

Heating Elements Cone Test Finger Probe UL1278 Figure 10.1 Standard Cone Probe UL1278 Figure 10.1 Product Details Cone Probe UL1278 Figure 10.1 SM206 : Standard requirement: UL1278 Figure 10.1 and UL1278 chapter 10 Guarding of Heating Elements ...

Brand Name:SHC

Model Number:SC-F1218 F1319

Place of Origin:China

Figure 12 13 Children Safety Test Finger Probe 18 19 IEC61032 Main specification and corresponding technical parameters: Parameters /Model Children’s finger probe SC-F1218 Children’s finger probe SC-F1319 1 R4.3±0.05 mm R2.8±0.05 mm 2 Ф8.6±0.1 Ф5...

Brand Name:GENY

Model Number:YC1891D

Place of Origin:CHINA

...meter test equipment Description: 1. The meter testing system supports automatic, semi-automatic, and manual operations for testing mechanical meters, electronic-mechanical meters, and electronic meters. 2. Testing meters: 1P2W. 3. Testing modes: Active power, reactive power, and cross-connected reactive power. 4. With MSVT, it can test single-phase meters...