multiple iec leakage current tester

Place of Origin:China

Brand Name:KeRang

...tester LP-1, LP-2 Product information: This device is designed according to the relevant technical requirements of IEC, UL, and related technical requirement of national standards. It is applied to test of current power cords, cables and electrical material whose tested requirements of the current are under 50A/20A. Only in the test of current...

Brand Name:SONTUOEC, WZSTEC

Model Number:STN-364

Place of Origin:China

... shock caused by indirect contacts. These devices must be used in series with an MCB or fuse which protects them from the potentially damaging thermal and dynamic stresses of any over currents. They also act as the

Brand Name:Sinuo

Model Number:SN2109

Place of Origin:China

IEC 60884-1 Clause 12.3.11 Screwless Terminals Electrical and Thermal Stresses Test Apparatus Standard: IEC60884-1 clause 12.3.11. Application: It is used to check whether the screwless terminals can withstand the electrical and thermal stresses occurring...

Brand Name:Sinuo

Model Number:SN2133

Place of Origin:China

IEC 60884-1 Clause 23.4 40A Load Cabinet for Flexible Cable Flexing Test Apparatus Product information: This load cabinet meets the requirements of IEC60884-1 clause 23.4, UL and etc. It is used to supply test current for power lines, cables and electrical...

Brand Name:PEGO Group

Model Number:RK2672EM

Place of Origin:China

...fast to test break down voltage, leakage current and other electric safety index. It is meet the requirements of IEC60335, IEC60598-1, IEC60065 and IEC60950. 2. Features 1). The test voltage up to 5KV with DC and AC ...

Brand Name:HaiFyer

Model Number:A115

Place of Origin:China

Switching adapter for medical use 1, Certified acc. to EN60601-1, 3rd edition and EN60601-1-11 2, 2 x MOPP between primary side and secondary side 3, ErP & CEC efficiency regulation compliance 4, Low leakage current, <50uA 5, 3 year warranty Technical data...

Brand Name:DAXIAN

Model Number:DX8427

Place of Origin:China

... of resistance to electric tracking and corrosion. Executive standard: - IEC 60587-2007 Technical parameter: Test time 6 hours Drip device igh precision peristaltic pump Number of experimental ...

Brand Name:PEAKMETER

Model Number:PM5910

Place of Origin:China

... RCD Loop Resistance Tester Complys With IEC/EN 61010-1 1000V CAT II, 600V CAT III English User Manual:https://drive.google.com/open?id=1sf9LsOu_x0tWCr9Yo0qIbZqYqJNVH2i4 Features of RCD Loop Resistance Tester Trip-out current measurement Trip-out time...

Brand Name:Sinuo

Model Number:SN2510

Place of Origin:China

IEC 60898-1 Circuit Breaker 500A Residual Current Testing System Product overview: It complies with the standards of IEC 60898-1, IEC 1008-1, IEC 61009-1, IEC 62423 and etc. Main components (power cabinet, leakage control cabinet, resistance load cabinet) ...

Brand Name:J-ENERGIZE

Model Number:JET-AG48B30

Place of Origin:XIAN, CHINA

... voltage 2, if there is looseness, heat generation and corrosion in the connection. Must be cleaned in time and anti-rust. Loose connection will cause burning. 3, if there is leakage and deformation of the battery shell, and if there is heating. 4. if

Brand Name:VICTOR

Model Number:VICTOR 140A

Place of Origin:CHINA

VICTOR 140A 0--60A High Accuracy Clamp Leaker With RS232 Small Clamp Size AC Line And on-line current measurement lower than AC600V Introduction High Accuracy Clamp Leaker is specially designed for measurement of AC leakage current; by adopting up-to-date ...

Brand Name:VICTOR

Model Number:VICTOR 140A

Place of Origin:CHINA

VICTOR 140A 0--60A High Accuracy Clamp Leaker With RS232 Small Clamp Size AC Line And on-line current measurement lower than AC600V Introduction High Accuracy Clamp Leaker is specially designed for measurement of AC leakage current; by adopting up-to-date ...

Brand Name:kingpo

Model Number:AN96810

Place of Origin:china

IEC 60601-1- clause 15.5.2 Dielectric strength , Transformer Induction Withstand Voltage Tester Technical parameters: Output voltage: 100V~3000Vac Accuracy ± (1%+1V) Test current: 0.1mA~150.0mA Output power: 450VA Test time: 0,0.3~999.9s Accuracy: ± (0.5%+50ms) Output frequency: 40.0Hz~600.0Hz TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC...

Brand Name:KingPo

Model Number:ML-91VA

Place of Origin:China

IEC 60335-2-25, 6th Edition (2010) - A1/2014 - A2/2015 Household and similar electrical appliances – Safety – Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens IEC 60335-2-25-clause 32- Microwave Survey Meter ...

Brand Name:kingpo

Place of Origin:china

Model Number:KP-FT03

...Tester Brief Introduction Tracking tester(Tracking Index Test)is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60112 ,UL 746A ,GB/T4207,GB4706.1,ASTM D 3638-92,etc. tracking test of leakage current...

Brand Name:ZL

Model Number:ZL-1029

Place of Origin:China

5 Stations Tracking Index Tester For Electrical High Voltage Leakage Test standard: IEC 60587 Description: This testing machine suit for electronic products, household appliances and other materials resistance to tracking and erosion test, simulate the ...

Brand Name:Sinuo

Model Number:SN2503

Place of Origin:China

IEC 61009-1 Circuit Breaker Mechanical And Electrical Life Tester Standards & Clauses: The test equipment conforms to the standard requirements of IEC 61009-1:2012, IEC 60898-1:2015 clause 9.11, etc. It can carry out mechanical and electrical life test on the circuit breaker, and the supporting load cabinet can realize the on-load test on the circuit breaker under the rated voltage and rated current...

Brand Name:Sinuo

Model Number:SN2503

Place of Origin:China

... and similar installations-Part 1: Circuit-breakers for a.c.operation clause 9.11 Verification of machnical and electric endurance And IEC 61009-1:2024 Residual current operated circuit-breakers with integral overcurrent protection for household and

Brand Name:HongCe

Model Number:HDX1315

Place of Origin:China

...appropriate length shall be attached by one end to a rigid support and a weight having a mass of 0,5 kg shall be secured to the sample 0,5 m below the point of attachment. A current of about 0,1 A shall be passed through the conductors. The weight shall be

Brand Name:XZH TEST

Model Number:XHGX507

Place of Origin:China

...tester , also known as pipeline tester or path tester, is a path detection instrument with strong comprehensive performance. It has multiple functions such as pipeline path detection, cable identification, fault finding , etc. The instrument consists of a transmitter, a transmitting current clamp, a receiver , a receiving flexible current...