non destructive testing method

Brand Name:DAXIAN

Model Number:DX8352

Place of Origin:China

.... The generated arc can cause breakdown and short circuit to the electrical appliance, material corrosion due to discharge, and even lead to fire. The leakage trace test is a destructive test conducted on insulation materials to

Brand Name:Lixian

Model Number:HZ-7017

Place of Origin:China

... test specimens of special equipment. Preparation of the sample machine line and various pipe GB1040-92 standard requires the sample size and technical requirements. Preparation of sample size can be: 1) GB/T1040-92 "Test Method for Tensile Properties of

Brand Name:HJ

Model Number:GW-2

Place of Origin:China

...Testing Equipment Touch Screen Operation Standard of Glow Wire Tester: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure; IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products; IEC60695-2-12 Fire hazard testing – Part 2-12: Glowing/hot-wire based test

Brand Name:Suzhou Desisen (DSS) Electronics

Model Number:SWT-630

Place of Origin:china

... frequency two modes for detection. 3, the steel pipe that is tested as qualified material will be transferred to the lower machine by the transfer roller, and the steel pipe with unqualified material will be sprayed with color markers or removed by the

Place of Origin:XIAMEN,china

Brand Name:COBE

... testing methods can be combined flexibly according to customers’ actual needs Testing speed : 0-30m/min Testing object: seamless pipe , steel bar Testing material : Carbon steel , stainless steel,copper, aluminium, titanium and different kinds of non-

Brand Name:REFOND

Model Number:RF306A

Place of Origin:Shen Zhen, China (Mainland)

...Fixed Flow Rate Bursting Mode: Flow rate(5-100kPa/s)can be set to meet different test methods, such as the M&S test standard. Applications Testing the knitted, woven and non-woven fabric, paper and cardboard for largest height and bursting pressure values.

Brand Name:REFOND

Model Number:RF306A

Place of Origin:Shen Zhen, China (Mainland)

...Fixed Flow Rate Bursting Mode: Flow rate(5-100kPa/s)can be set to meet different test methods, such as the M&S test standard. Applications Testing the knitted, woven and non-woven fabric, paper and cardboard for largest height and bursting pressure values.

Brand Name:HJ

Model Number:GW-2

Place of Origin:China

...Testing Equipment Glowing/Hot-Wire Tester With Touch Screen Operation Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure, IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products, IEC60695-2-12 Fire hazard testing...

Brand Name:HJ

Model Number:GW-1

Place of Origin:China

...Testing Equipment For IEC60695-2-10 With 4mm Glow-Wire And Button Operation Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure, IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products, IEC60695-2-12 Fire hazard testing...

Brand Name:HongCe

Model Number:GW-2

Place of Origin:China

.... It belongs to the IEC 60695 series of standards "Tests for the assessment of fire hazard" and includes the standard parts 2-10, 2-11, 2-12, and 2-13. IEC 60695-2-10 – Glow wire test equipment and general test method. IEC 60695-2-11 – Tests with the

Brand Name:JINHAIHU

Model Number:XJL-300B

Place of Origin:BEIJING, CHINA

...test of non-metallic materials, such as plastic, glass, pottery, etc. At the same time, it can also carry out the impact test on the same materials to make a comparison among the qualities of the materials. It is suitable to both passing method and gradient methods...

Brand Name:KINSGEO

Model Number:KJ-6031

Place of Origin:CHINA

...test method No. 9: loop tack measurement), PSTC-16(Loop tack), ASTM D6195-03(Standard test methods for loop tack), GB/T31125-2014(Test method for initial viscosity of adhesive tape - ring method) and etc. Test Principle Fully contact the loop sample and standard float test...

Brand Name:KEJIAN

Model Number:KJ-1076

Place of Origin:Dongguan,China

..., cutting tests of metal, non-metal and composite materials (rubber, plastic, woven, steel materials, ceramics, etc.) It meets with the requirements of GB/T228-2002, Tensile Testing Method of Metal Materials at Room Temperature. It is widely used in

Brand Name:SAMYON

Model Number:FBT-9C

Place of Origin:CN

...Testing Instrument With Printer Application: This instrument is used to test the specific surface of cement by Blaine method according to GB/T 8074-2008 standard. Compared with FBT-9 specific surface tester, the FBT-9C instrument has one printer, so it can print out the K value and specific surface value directly after testing. Standard: GB/T 8074-2008 Testing method for specific surface of cement – Blaine method

Brand Name:YUYANG

Model Number:YY029

Place of Origin:China

... under fire condition, A corresponds to ENV 1187, B and C correspond ISO 12468-1. Standards: ENV 1187: Test Methods for External Fire Exposure to Roofs ISO 12468-1: External Exposure of Roofs to Fire- Part 1 Test Method EN 13501-5: Fire Classification of

Brand Name:GDZX

Model Number:ZXPD-100K

Place of Origin:CHINA

... testing sensing network,GIS UHF sensor, HV cable sensor for options, customizable 3. Detection principle: UA TEV UHF 4. software function 1) Continuous detection of UA TEV UHF signals for detection of PD 2) Real time display the tested signal trend for

Brand Name:SAMYON

Model Number:HBC

Place of Origin:CN

...non-ferrous metals and tensile strength of steel products. It is especially suitable to determine the Brinell hardness of large heavy parts on the spot. Standard: ASTM E10-2018 Standard Test Methods for Brinell Hardness of Metallic Materials ISO 6506-2:2017 Metallic materials - Brinell hardness test...