plc control plug socket tester

Brand Name:HongCe

Model Number:HC9906

Place of Origin:China

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Place of Origin:China

Brand Name:HongCe

Model Number:LH-1

Climatic Chamber Environmental Test Chamber Product details: This chamber is in accordance with the IEC60884.1 standard which is used for the heat ageing test and electrical insulation test of the plasticity material (rubber, plastic). It is equipped wit...

Brand Name:HongCe

Model Number:HC9910A

Place of Origin:Chnia

Device For The Temperature Rise Test Of IEC60884-1 Clause 19 Figure 44 high-precision 6 stations Standard: IEC60884-1 Plugs and socket-outlets for household and similar purposes – Part 1:General requirements clause 19 and figure 44. Application: It is ...

Brand Name:kingpo

Place of Origin:china

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Brand Name:kingpo

Model Number:KP-BCL04

Place of Origin:china

Harden Steel IEC60884 Figure18 And Figure19 Verification Of Maximum Withdrawal Force Test Apparatus Application: This device complies with the requirements of IEC60884 Figure 18/19, VDE0620, etc. It is suitable for checking the maximum force required to ...

Brand Name:PEGO

Model Number:PG-TIS166

Place of Origin:China

TIS166-2549 plug and socket-outlet test gauges 1. Introduction The gauges are strictly designed according to TIS166-2549, in figure A.1 to A.5 are used to check dimensions of the socket-outlet and gauges in figure A.6 to A.7 are used to check pulling force...

Brand Name:HongCe

Model Number:HC9906

Place of Origin:China

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Place of Origin:China

Brand Name:HongCe

Model Number:FP-1

Apparatus To Verify The Fixation Of Pins In The Body Of The Plug Product details: This device conforms to the standard of IEC 60884-1 Fig30. It is used for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate ...

Brand Name:PEGO GROUP

Model Number:PG-BS1363

Place of Origin:China

On Sales BS1363 Contact and Non-Contact Test Gauges for Plug and Socket-Outlet Standard Number Description Figure number QTY BS1363-1 Test pin BS1363-1:1995 figure 1 1 BS1363-1 Apparatus for mechanical strength test on resilient covers BS1363-1:1995 figure...

Brand Name:PEGO GROUP

Model Number:PG-AS/NZS3112

Place of Origin:China

Hardened Steel Plug Withdrawal Force Test Gauges Maximum and Minimum AS/NZS3112 1. Introduction The withdrawal force test gauges are designed according AS/NZS3112 Figure 2.1(a), and meet the requirement of clause 3.14.8.3 and clause 3.14.8.2, includes thr...

Place of Origin:China

Brand Name:KeRang

...Tester FCT-1 Product details: This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord anchorages Rating of plug or portable socket...

Place of Origin:China

Brand Name:HongCe

Model Number:LP-3

Load Box For Lab Equipment Testing Product overview: This load box is designed and manufactured according to IEC60884,IEC61058,IEC606691 standards and etc. It is used for the on-off ability test and the normal operation lifespan test of the Switches for ...

Brand Name:HongCe

Model Number:HC9931

Place of Origin:China

IEC60884-1 clause 24.18 figure 35. Verification of groove hole and reverse taper gauge Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.18, figure 35. Application: It is used to ...

Brand Name:HongCe

Model Number:HO6508

Place of Origin:China

Performance Tester For Proximity Switches With Integrally Connected Cables Pull Force 160N Torque Test 0.1Nm (360°) Product Introduction The performance tester for proximity switches with integrally connected cables is special designed and manufactured as ...

Brand Name:kingpo

Model Number:KP-CG95

Place of Origin:china

IEC 62196 Vehicle Drive Over Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is ...

Brand Name:HJ

Model Number:HC9916

Place of Origin:China

Plug Socket Test Apparatus For Verification Of Maximum And Minimum Withdrawal Force Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 22.1, clause 22.2, figure 18&19 and table 16. ...

Brand Name:SHC

Model Number:SC-EN75

Place of Origin:China

EN50075 Gauge And Apparatus For Plug And Socket EU Standard Specification: EN50075 Figure Name Figure 1 Gauge for pin diameter Figure 2 Gauge for interchangeability Figure 3 Standard test finger Figure 4 Gauge for checking impossibility of single-pole ...

Brand Name:SHC

Model Number:SC-SANS 164

Place of Origin:China

SANS 164 Gauge For Plug And Socket South African Standard Gauges Specification: Product Model Standard Product Name SC-S4-11 Edition 5 ANNEX A SANS 164-1 SC-S4-12 Edition 5 ANNEX B SANS 164-1 SC-S4-13 Edition 5 ANNEX C SANS 164-1 SC-S4-14 Edition 5 ANNEX...

Brand Name:SHC

Model Number:SC-SANS 164

Place of Origin:China

SANS 164 Gauge For Plug And Socket South African Standard Gauges Specification: Product Model Standard Product Name SC-S4-11 Edition 5 ANNEX A SANS 164-1 SC-S4-12 Edition 5 ANNEX B SANS 164-1 SC-S4-13 Edition 5 ANNEX C SANS 164-1 SC-S4-14 Edition 5 ANNEX...