poe injector voltage

Brand Name:E-link

Model Number:LNK-PSE601G-SFP

Place of Origin:China

...voltage is rated, 55Vdc. With detection chip inside, before powering, there has a detect process. ► 4KV surge protection on PoE port ► To protect indoor devices and inner components from surge damage, we design 4KV (10/700μs) on PoE port. ► AC Port:

Brand Name:KUNCAN

Model Number:KC-PA-11

Place of Origin:Guangdong, China

... 0.5A POE Injector Input Voltage 100-240V AC 100-240V AC Output 24V DC @ 1A (24W) 48V DC @ 0.5A (24W) ...

Place of Origin:CHINA

Model Number:POE-IJ806

...POE Combiner (Injector and Splitter) is also called Multiplexer, Simple type POE injector POE-IJ806 General Specification: Power Supply Mode: Direct Feeding=Plug and supplying power, supplying power directly without advanced detection for Power Device (PD)­; Support 100M network transmission ­­Input voltage: DC 5-52V Input Current: Depends on connected device Output voltage: It is equal to input voltage...

Brand Name:AEO

Model Number:AEO-PI60W

Place of Origin:China

Gigabit POE Injector 60W 100m by Cat5/5e/6 Technical Parameters Item Description Interface Input Voltage AC100V~AC240V Data Input 1×RJ45 PoE output 1×RJ45 PoE PoE Power Method End-span / Mid-span PoE Power Output DC 54V/60 watts Output Ripple ＜5% Power Pin...

Brand Name:E-link

Model Number:LNK-INJ401-90

Place of Origin:China

...PoE+ injector that supports IEEE 802.3bt and LTPoE++ standards. This injector is designed to provide a power source for PoE devices, such as cameras and access points, using a non-PoE LAN switch. It has an input voltage range of 12~48V DC and includes a voltage booster for added efficiency. The LNK-INJ401-90 allows for seamless integration of PoE...

Brand Name:SEEMYT

Model Number:SMT-P30W

Place of Origin:China

1. Introduction The PoE Injector is a single port POE injector offer a compact and cost effective, It can convert standard 100~240V/AC power into low voltage.DC that runs over existing LAN cable to power up IEEE 802.3af&at compliant network accessories. ...

Brand Name:Nufiber

Model Number:POE48V-0.5A

Place of Origin:China(mainland)

...PoE Power Supply 48V 0.5A 24W POE Wall Plug POE Injector Ethernet Adapter IP Camera Phone EU Specification Type 48V 0.5A POE Adapter Switching Power Adapter EU Plug Input 100-240V AC 50/60Hz Output 48V 0.5A/ 24V 1A/ 12V 2A Plug EU/UK/US/AU Output Type 1*RJ45 connector ---POE 1*RJ45 connector ----LAN Output Power 10-25w Material Plastic Efficiency 85%(MIN)at Rated Voltage...

Brand Name:Olycom

Model Number:OM-PSU-P-48V-60W

Place of Origin:Shenzhen, China

... Full-positioned LED to indicate status Non-vented mini case Specification of PoE Injector Output Power DC Output Voltage 56V±5％. Rated Output Current 625mA Ripple And Noise 0.5 Vp-p Total Output Power 30W Efficiency 84% (typical) at ...

Brand Name:UTOPTEK

Model Number:UT-PSE30

Place of Origin:China

10/100Mbps 30W POE Injector PoE data & power:100meters for Cameras wireless AP Product Description: The UT-PSE30 Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium ...

Brand Name:Mray

Model Number:MR-PA1508

Place of Origin:Shenzhen, China

...PoE Injector Power Over Ethernet Adapter POE Devices Description The PoE injector can realize simultaneous delivery of device network data and power via one Ethernet cable (Cat.5 or better). The output power of the PoE port is up to 12W, which is a single port Midspan (PoE injector...

Place of Origin:ShenZhen China

Brand Name:Fiberroad

Model Number:FR-POE311-XX

...POE Injector POE Injector is a single port, high-power solution for remote powering of current and emerging high power applications. Generating up to 30W, Injector enables remote power for a new range of applications including 802.11Access Points, pan-tilt-zoom(PTZ) cameras and video-phones. For our this POE Injector...

Brand Name:Wangtong

Model Number:48V

Place of Origin:Shenzhen China

... Introduction: 1) This Non standard PoE injector is a single port high-power solution for remote powering of current and emerging high power applications. , Enables both home and office ...

Brand Name:LINK-PP

Model Number:7499211125

Place of Origin:GuangDong, China

7499211125 , LPJ16047A10NL Rectifier Bridge PoE Injector Rj45 7499211125 Single Port Rj45 Connector With Integrated Magnetics RJ-45 IEEE 802.3af Power over Ethernet (PoE) Complies with requirement of IEEE802.3af standards. 10/100 Ethernet RJ45 ...

Brand Name:Cisco

Model Number:AIR-PWRINJ3

Place of Origin:USA

... Description Input Voltage: 48V DC Output Voltage: 48V DC Output Power: 15W CISCO AIR-PWRINJ3 Interfaces/Ports Input Ports: 1 x RJ-45 10/...

Brand Name:NEWBRIDGE

Model Number:ND-PD3101-at

Place of Origin:SHENZHEN,CHINA

Single port poe injector support IEEE 802.At standard Product Description ND-PD3101-at is a single port poe injector,it is support IEEE 802.At standard,maximum up to 30watts of power output over UTP cables.It is designed specially to fill the demand of ...

Brand Name:CISCO

Model Number:WS-C3750X-48PF-L

Place of Origin:USA

... Image Cisco Catalyst 48 Port POE Injector Networking Switch WS-C3750X-48PF-L ♦ Detail: Cisco Catalyst WS-C3750X-48PF-L The Cisco Catalyst 3750X-48PF Switch Layer 3 - 48 x 10/100/1000 Ethernet PoE+ Ports (800W PoE Power Available)- LAN Base - Managed - ...

Brand Name:Shareway

Model Number:750310743

Place of Origin:Guangdong China

...: –40 °C to +125 °C (incl. self-heating) Applications PoE+ powered devices IP Phones WLAN Access Points Security cameras Electrical Properties: Properties Test conditions Value ...

Brand Name:Aruba

Model Number:PD-9001GR-AC

Packaging & delivery Selling Units: Single item Single package size: 20X20X15 cm Single gross weight: 20.000 kg Package Type: PAC-500WA-BE Product Description Quantity(pieces) 1 - 20 >20 Lead time (days) 2 To be negotiate FAQ Q1.What can you buy from us?...

Brand Name:Gangqi

Model Number:GQ24-480035-AC

Place of Origin:China

.... Designed for power-hungry devices, provides up to 60 watts, twice as much as conventional PoE+ injectors. It features DIP switch configurator and LED indicator for PoE management, and also supports 24VDC /48 VDC power inputs for power redundancy and