pull test machine

Brand Name:Pego Electronics

Model Number:PG-LTP

Place of Origin:China

...o verify if the contact of connectors and appliance outlets have sufficient mechanical strength. A lateral pull force in parallel with the engagement face, is applied to the cable of the connector / plug connector in four directions in step of 90°±5°, a

Brand Name:ASLI

Model Number:AS-PC-10000

Place of Origin:China

fabric pull tensile strength test machine with 500mm/min testing speed Application: The Computer Tensile Test tester is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on,...

Brand Name:Infinity Machine

Model Number:IN-I5150

Place of Origin:Made in China

.... Equip with automatic center system and special connecting grips to make sure to get accurate testing result. Adopt windows displayer in English program, easy operating, automatic memory ( torque & angle curve, torque life time curve, test report ),

Brand Name:Pego

Place of Origin:China

Model Number:PG-CRT

...Testing Equipment IEC60320-1 Pull Test Equipment for Connectors and Plug Connectors 1. Introduction The pull test apparatus designs to meet the test requirements of IEC60320-1 clause 22.2.3 and figure 6, for testing the cord (cable) anchorage of connectors / plug connectors relieve from strain and twist. Fix the test sample in the test...

Brand Name:Infinity Machine

Model Number:RS-8105

Place of Origin:Made in China

... cable forward to the center of the turnplate. Pull the cable vertically with load at rated bending speed, angle and times then to begin the bending test. When the tester stops automatically, check the jacket damage and the breakage rate of conductors.

Brand Name:PEGO GROUP

Model Number:PG-PCT1

Place of Origin:China

... testing machine can be provided with calibration certificate authorized by ISO17025. It is made according to the standards of IEC60335-1 clause 25.15, IEC60598, GB7000, GB2486 and etc., It is applied to test the tension and torque on the terminals of

Brand Name:Haida

Model Number:5070-HD

Place of Origin:China

...TEST PURPOSE: This machine tests the pull-out lifespan of the pull-out tube, the lifespan of the showerhead button, and the swing of the water outlet to evaluate the quality of the samples. TEST STANDARD: ASMEA112.18.1-2005; CSAB125.1-05; GB18145; EN817 STANDARD FAETURES: 1. Test samples: 4 sets (1 set of pull...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-F743

... force values ​​turn sensor read correctly tension, the action of the closed-loop control of servo motor to achieve a number of pull. Static and

Place of Origin:China

Brand Name:HAIDA

Model Number:HD-M008

... Test Cookware Testing Machine With Abrasion Resistance APPLICATIONS& TEST PURPOSE: Fry pan or wok (with non stick surface) is fixed well on the platen and abrasion pad moves forward on the surface of cookware. Abrasion pad is driven by the pull of guide...

Brand Name:Infinity Machine

Model Number:IC1362

Place of Origin:Made In China

...Pull Test Machine Model: IC1362 Application: Suitable for all kinds of small electronic products charging power cable, earphone wire, small multi-core wire for oblique 45 degree rotating life test. Features: 1. Dual station design, independent control, greatly save the test space, transparent protective cover design, not only convenient to observe the test...

Brand Name:Skyline

Model Number:SL-T22

Place of Origin:China

...Test Machine Product Introduction The machine is designed to test office chair arm ( vertical and horizonal test ) and back strength. It with PLC controller, touch screen interface to input test parameters, test force and times can be set. Technical Parameters Capacity 0-200kg Setting time 0-99S (adjustable) PLC control LCD touch screen interface Motor One servo motor & air cylinder to provide pull force Test...

Brand Name:Skyline

Model Number:SL-T22

Place of Origin:China

...Test Machine Product Introduction The machine is designed to test office chair arm ( vertical and horizonal test ) and back strength. It with PLC controller, touch screen interface to input test parameters, test force and times can be set. Technical Parameters Capacity 0-200kg Setting time 0-99S (adjustable) PLC control LCD touch screen interface Motor One servo motor & air cylinder to provide pull force Test...

Brand Name:Skyline

Model Number:SL-T22

Place of Origin:China

...Test Machine Product Introduction The machine is designed to test office chair arm ( vertical and horizonal test ) and back strength. It with PLC controller, touch screen interface to input test parameters, test force and times can be set. Technical Parameters Capacity 0-200kg Setting time 0-99S (adjustable) PLC control LCD touch screen interface Motor One servo motor & air cylinder to provide pull force Test...

Brand Name:SKYLINE

Model Number:SL-T807

Place of Origin:China

... fatigue test. Conform to the standard: DIN51121, ASTMD638 software, etc Characteristics Operation is set at the Windows of the dialog; With the function of various units metric or inch can ...

Place of Origin:China

Brand Name:KINSGEO

Model Number:KJ-1065B

...machine is equipped with various fixtures to test the 900 and 1800 peel strengths, as well as the release force of adhesive tape and self-adhesive label products. This is to consider the adhesion performance of adhesive tape products. It can also test the tensile strength of the substrate. Additionally: This instrument can be operated and edited through software, and can perform tests...

Brand Name:HAIDA

Model Number:HD-B608

Place of Origin:Guangdong, China (Mainland)

...Pull Test Equipment Textile Testing Tester 0.1N Readability PRODUCT INTRODUCTION Button pull test equipment is used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments, prevent the buttons divorce from the clothing, which case the dangerous if baby swallowing the buttons. So that every button and fixed parts on the clothing are required the detection of the button pull test...

Brand Name:DAXIAN

Model Number:DX7016

Place of Origin:China

EN1400-2 Pacifier Anti-stab Test Fixture Used for Tensile Testing Machine Product introduction: 1. Mounted on a pull machine 2. The lower nipple fixing jig can move left and right to test different parts of the teat 3. The lower nipple support plate ...

Brand Name:HAIDA

Model Number:HD-M004

Place of Origin:China

Endurance Tester (non-stick coating) Cookware corrosion testing machine APPLICATIONS& TEST PURPOSE: The cookware on the platen moves forward and backward by the pull of guide rail with a certain speed (set in the standard). The times and height can be set ...

Brand Name:NANBEI

Model Number:ABL-90

Place of Origin:China

...Test Stand ABL Peel-off Force Test Stand is specially designed for NK, HF series Push pull equipment, can be combined into the test machine with different uses. Specially used in PC board on foil circuit adhesion force or Tin foil, aluminum foil, tape etc.

Brand Name:YUYANG

Model Number:YYE1085

Place of Origin:DONGGUAN

...Test Descriptions: Tensile testing is a fundamental type of mechanical testing performed by engineers and materials scientists in manufacturing and research facilities all over the world. A tensile test (or tension test) applies force to a material specimen in order to measure the material's response to tensile (or pulling) stress. This type of testing...