quarrying button bits

Brand Name:JCDRILL

Model Number:All Models

Place of Origin:China (Mainland)

Carbon Steel Dth Button Bits 8 Inch Drill Bit For Rock Blasting Drilling Description DTH drill bits are widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, ...

Brand Name:Jincheng Drilling Tools

Model Number:All Models

Place of Origin:China(mainland)

High Rigid DTH Hammer Bit Button Bit COP QL Mission Series Wear Resistant Description DTH drill bits are widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, ...

Brand Name:SUVEC

Model Number:tapered drill button bit

Place of Origin:China

...Button Bits With Drop Center Our Taper Drill button bits are produced by the most advanced production lines in China to make the top level rock drilling tools which carry at least 80% of the perfomance compared with their counterparts e.g Atlas Copco or Sandivik but being sold at much lower prices. Tapered drill bits are widely used in mining and quarrying...

Brand Name:ROSCHEN

Place of Origin:China

Model Number:4“

Down The Hole, DTH Drill Rock Button Bit for Quarry Drilling, Mining, DTH Hammer Drilling ROSCHEN DTH hammer and bits are compatible with CIR, DHD, QL, SD, Mission, etc. Series of Atlas and Secoroc etc. They are with high efficiency, low failure rate and ...

Brand Name:MIROC by KSQ

Model Number:CR32-7D-22

Place of Origin:China (Mainland)

... hole within diameter of 50m. The drill tools are used in metallurgy mine, geological exploration, water conservancy construction, electricity, traffic, tunnel, quarry etc. Product Description: Tungsten Carbide Cutting Tools Cross Drill Bits For

Brand Name:MING

Model Number:MTR127F8T51

Place of Origin:CHINA

...button drill bit Matched connection: T51 Diameter: 127mm other diameter: 89mm, 102mm, 115mm, 127mm, 140mm,152mm Skirt body: retrac, and normal, Face: flat, concave Carbide: spherical, ballistic,semiballistic Used: in drifting and tunneling, dimensional natural stone quarrying...

Brand Name:SUVEC

Model Number:tapered drill button bit

Place of Origin:China

... life, better powder exhausting and easier bit back, which combine well anti-wear and anti-impact carbide butttons and high-performance steel together. Tapered drill bit is a further development of the integral system where a comprehensive selection of

Brand Name:MIROC

Model Number:DTH Button Bit

Place of Origin:China

DHD360 152mm 6'' High Air Pressure DTH Button Bit for Atlas Copco COP 64 At present, DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling...

Brand Name:MIROC

Model Number:R32-270mm Reaming Thread Drill Bit

Place of Origin:China

R32 Reaming Thread Button Bit for Rock Drillings Reaming bits were widely used in quarrying or mining for blast hole drilling, with pilot adaptors, the drilling direction can be ensured and accurate. Pilot holes are drilled depth and then reamed out to a ...

Brand Name:SUVEC

Model Number:tapered drill button bit

Place of Origin:China

...used on the same rod. There are two standard hex rod sizes - 22mm or 25mm in diameter and up to 8000mm in length and a wide selection of bit designs for hole sizes 27-41mm (11/16" to 15/8"). The tapered drill bits are widely used in mining and quarrying,

Brand Name:MIROC by KSQ

Model Number:RP1576-R32-S

Place of Origin:China (Mainland)

Reaming Tools for Cut Holes R32 Integral Reaming Button Bit with Diameter 38mm and 76mm Reaming bits were widely used in quarrying or mining for blast hole drilling, with pilot adaptors, the drilling direction can be ensured and accurate. Pilot holes are ...

Brand Name:ROSCHEN

Model Number:COP 32

Place of Origin:GERMANY

...button bits China Cop32-90mm DTH Hammer Button Bit for Rock Drilling Product Name: DTH drill bits Description: DTH drill bits are used for blast hole drilling and water well drilling projects. Working with DTH hammer, mainly applied in Mining, Marble quarry...

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

...Button Bits Manufacturers & Suppliers, from China. We are one of the professional manufacturers & suppliers of rock drilling tools, tungsten carbide button bits, DTH bits, DTH hammers, rock tools, coal mining tools, mining rock tools, quarrying tools, machine tools, DTH hammers & bits, retrac button bits, thread button bits, tapered button bits, chisel bits, cross bits, thread cross bits...