red interlocking block making machine

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Stainless Steel Auger Spiral Cement Screw Conveyor Cement screw conveyor is bulk material handling equipment, which usually consists of a tube containing either a spiral blade coiled around a shaft (sometimes called an auger), driven at one end and held...

Brand Name:SANKON

Model Number:4.2M/4.8M/5M/6M

Place of Origin:CHINA

Tilting table/Overturn table composition: The bottom peeling table is mainly composed of reversing frame, blank body trolley, side plate trolley, moving device, pressing rod, roller, reversing seat and bearing, etc.The reverse and movement are controlled...

Brand Name:SANKON

Model Number:4.2M/4.8M/5M/6M

Place of Origin:CHINA

Slurry pump Vertical slurry pump is a vertical single stage single suction cantilever type centrifugal pump structure, impeller for the semi-open impeller, impeller suction side extension is equipped with a stirring blade.The pump is connected to the motor...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Sub Cylinder High Quality Pressure Vessel steam header Description : Sub-cylinder is the main supporting equipment of boiler,which distributes steam generated in the operation of boiler to the various pipelines .Sub-cylinder is pressured equipment ,belongs...

Brand Name:SANKON

Model Number:4.2M/4.8M/5M/6M

Place of Origin:CHINA

Ferry cart for AAC Description: Ferry cart used for different rails ferry,also called cross moving cart.comsisted of cart frame=,running draught device and positiong device.According to use , can be divided into pouring ferry cart,cutting ferry cart,...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Powder scale/Slurry scale Definition Scale equipments are consist of certain volume tank,scale components(sensor),data processing display, material discharging control valve and structure,scale accuracy 0.5-1.0% Powder scale used for power type materials...

Brand Name:SANKON

Place of Origin:CHINA

Model Number:4.2M/4.8M/5M/6M

AAC Overturn Table Hydraulic Station Working principle: The ground reverse turntable is a special equipment for removing the waste at the bottom of the cutting and forming billet.The turning table is mainly composed of reversing frame, blank body trolley...

Brand Name:SANKON

Model Number:4.2M/4.8M/5M/6M

Place of Origin:CHINA

AAC Pouring Mixer Definition Pouring mixer used for every types of materials and water mixture and pouring,Quick dispersion of pouring mixer,mixing evenly,fastly piruing, have founcation of temperature regulation. Mixing time less than 4 min,pouring time...

Brand Name:SANKON

Model Number:Customized

Place of Origin:CHINA

Side Plate Instruction: Side plate usually assemble with mould to put slurry. after cutted,mould will be demoulded ,left side plate and cake. side plate will take cake enter into autoclave,after steamed,cake will be separated ,side plate will recycle by ...

Brand Name:SANKON

Model Number:4.2M/4.8M/5M/6M

Place of Origin:CHINA

AAC line Steaming trolley Recommended application: Steaming trolley is transportation trolley in AAC production line,loaded cutted cake,entered into autoclave to steam.After steamed,convey finished products to finished product area,unload finished products...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Casting mixer for AAC Line Application: The casting mixer (refer to the picture) is used for mixing concrete body before casting. It is located on the casting blank mold. Structure: The casting mixer is composed of mixing drum and casting arm The mixing ...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Tube type screw feeder for AAC Production Line Description: Pipe screw conveyor is not only used in concrete mixing station (building), asphalt mixing building, dry powder mortar production line to transport cement, fly ash, mineral powder, dry sand, etc.,...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Product Description: Vacuum pump and compressor use water as sealant,so it can suction air,steam,gas that contains much water,and powder gas without granule. It's maily used in low/rough vacuum degree and big capacity area,such as vacuum drying,vacuum ...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Cylinder purpose: The cylinder is also called the drum, it is the steam boiler essential ancillary equipment, cylinder is widely used in power generation, petrochemical, steel, cement, construction and other industries. Performance structure of cylinder...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Aluminum powder mixer Application: It is used for mixing aluminum powder. Technical parameter: 1.Max outside size Length:630mm Width:500 Height:1142 2.Weight≈200KG 3.Motor Type:Y2-801-4 Power:0.55KW Rotate speed:1390r/min Mixing drum capacity:V=0.052m3 4....

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Dust collector Working principle: The dust collector on the top of the warehouse is to collect dust and discharge clean air into the cement tank, so that there is no negative pressure in the warehouse and the storage pressure of the ash warehouse is ...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Titing table for AAC Line Description : Recommended application In AAC production line, after finished cutting,turn cakes 90° ,use waste moving device to move top and bottom wastes. Working principle: At the bottom of cake will have one layer watse,cake...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Application: It is used to move the billet and the side panel to the turning table for de-skin. Technical parameter: 1.Maximum Size (Maximum)(including guide frame) L:6140mm W:1700mm H:4810mm 2.Weight:3800㎏ Structure: The sling is composed of a horizon ...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

AAC Prodution Line Ball Mill Description: The ball mill is the key equipment to crush the material after it is broken.Aerated brick ball mill is widely used in cement, Portland products, new building materials, refractories, chemical fertilizers, black...

Brand Name:SANKON

Model Number:CUSTOMIZED

Place of Origin:CHINA

Application: It is special equipment (see the picture) for hooking and pushing autoclave on the steam raising line. Main technical parameter: 1.The length of the drawing mechanism can be made base on customer's requirement. 2.Weight:~1800kg 3.Reducer (pre-...